Punching Out: New Year’s Goals for Selling a Business
Fein-Lines: CES 2025—The Consumer Technology Association's Super Event
It’s Only Common Sense: Making 2025 the Best Sales Year Ever
ULT Introduce New Extraction Solution for Combustible and Carcinogenic Laser Dusts
August 6, 2024 | ULT AGEstimated reading time: 1 minute
ULT is introducing the LAS 260 H/Ex, a new solution for removing critical dust during various laser processes. The explosion-proof device was developed for extracting and filtering dry, combustible, and health-endangering pollutants (dust and fumes) that can arise during laser processing of plastics and metals.
As an ATEX-compliant system designed to be free of ignition sources, the LAS 260 H/Ex is suitable for installation and operation within a zone 22 and enables the safe separation of combustible dust. Even the finest particles are separated to 99.995% in a two-stage filter system including a HEPA H-14 filter and safety filter stage.
The safety filter with integrated activated carbon filling ensures the safe operation of the device and removes gases that are hazardous to health and unpleasant odors. Due to the high level of cleaning, the filtered clean gas can be fed back into the work area even when carcinogenic, mutagenic, or toxic dust is separated (recirculation mode).
In addition to the redundant filter system, the LAS 260 H/Ex provides further user benefits such as high flexibility through mobile utilization, extremely quiet operation, and low energy consumption.
All electrical components are suitable for UL and CE compliant use. In addition, the device can be used worldwide with a voltage range of 110-240 V.
To ensure compliance with the minimum volume flow of >20 m/s, an automatic monitoring system is integrated, which issues a warning signal if the flow falls below this limit.
A collection element (hose, pipe, extraction arm) with DN50 can be connected to the extraction and filter system. In addition, an M12 i
Share on:
Suggested Items
INSPECTIS AB Partners with Sony ISS to Launch Series U50 Digital Camera Microscope
01/09/2025 | INSPECTIS ABINSPECTIS AB has partnered with Sony Image Sensing Solutions to develop the Series U50 digital camera microscope, featuring an impressive 4K resolution and a 60 FPS frame rate.
Eighteen New Semiconductor Fabs to Start Construction in 2025
01/08/2025 | SEMIThe semiconductor industry is expected to start 18 new fab construction projects in 2025*, according to SEMI’s latest quarterly World Fab Forecast report. T
Global Semiconductor Sales Increase 20.7% Year-to-Year in November
01/08/2025 | SIAThe Semiconductor Industry Association (SIA) announced global semiconductor sales hit $57.8 billion during the month of November 2024, an increase of 20.7% compared to the November 2023 total of $47.9 billion and 1.6% more than the October 2024 total of $56.9 billion. Monthly sales are compiled by the World Semiconductor.
Marcy LaRont Named I-Connect007 Executive Director
01/08/2025 | IPCMarcy LaRont, a printed circuit board (PCB) industry veteran who has been working as the managing editor for PCB007 Magazine this past year, has been named executive director of the I-Connect007 group of publications, which was purchased by IPC in 2022.
EMS Providers Should ‘Plan Prudently’ in 2025
01/08/2025 | Nolan Johnson, SMT007 MagazineDennis Reed is a senior research analyst who specializes in electronics manufacturing at Edgewater Research, a leading research and market intelligence firm covering a mix of compute—CPU, GPU, memory, both flash and DRAM, and hard drive—and insights on components which includes broad line semiconductor, IP&E distribution, and channels.