Trouble in Your Tank: Metallizing Flexible Circuit Materials—Mitigating Deposit Stress
Dan’s Biz Bookshelf: ‘In Defense of a Liberal Education’
Cirexx International Inc. Chooses atg A9 Flying Probe Technology for High-speed Electrical Test
September 19, 2024 | atg Luther & Maelzer GmbHEstimated reading time: Less than a minute
atg Luther & Maelzer GmbH confirms delivery of high-speed bare board testing technology to PCB fabricator, Cirexx International Inc., in Santa Clara, CA.
Consistent with the on-going investment in leading edge technologies at Cirexx International Inc., the A9 8 head, double-sided, high speed, high accuracy flying probe test system represents the newest addition to Cirexx’s test department. The latest atg technology enables Cirexx to test the most advanced ultra-fine designs while helping to reach industry leading throughput goals.
atg’s A9 can test pad sizes down to 35 micron and is capable of testing products up to a size of 21” x 24”. The A9 eliminates limitations due to test point density or fine-pitch contacts and features embedded component test, 4-wire Kelvin measurement capability with an accuracy of +/- 0,025 mΩ, HPOT and latent testing, all in combination with a test speed of up to 230 measurements/second.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Atg Launches Latest Large Format Test System, A9XL, with 8 Heads and 48” x 26” Panel Capability
08/04/2025 | atg Luther & Maelzer GmbHatg Luther & Maelzer GmbH (a Mycronic company) is proud to roll out a new large format test system generation based on the latest high speed atg A9 (board size up to 24” x 21”) and A9L platform.
Magnalytix’s Dr. Mike Bixenman to Guide PDC at SMTA High-Reliability Cleaning and Conformal Coating Conference
07/31/2025 | MAGNALYTIXMagnalytix, providing real-time reliability solutions for electronics manufacturing, is excited to announce that Dr. Mike Bixenman will present the professional development course “The Effects of Flux Residues and Process Contamination on the Reliability of the Electronic Assembly” on Wednesday, Aug. 13 at 9:00 AM CST to open the second day of the STMA High-Reliability Cleaning and Conformal Coating Conference.
TRI to Exhibit at SMTA Queretaro Expo 2025
07/16/2025 | TRITest Research, Inc. (TRI), the leading provider of test and inspection systems for the electronics manufacturing industry, is pleased to announce plans to exhibit at the SMTA Querétaro Expo 2025, scheduled to take place on July 24, 2025, at the Querétaro Centro de Congresos y Teatro Metropolitano.
Knocking Down the Bone Pile: Addressing End-of-life Component Solderability Issues, Part 4
07/16/2025 | Nash Bell -- Column: Knocking Down the Bone PileIn 1983, the Department of Defense identified that over 40% of military electronic system failures in the field were electrical, with approximately 50% attributed to poor solder connections. Investigations revealed that plated finishes, typically nickel or tin, were porous and non-intermetallic.
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/16/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.