The Government Circuit: News on Defense Electronics, Europe, and Sustainability
American Made Advocacy: Taking the Fight to Capitol Hill
Defense Speak Interpreted: SWaPing Nanosatellites for Defense SystemsPCB Surface Topography and Copper Balancing Under Large Form Factor BGAs
October 1, 2024 | Neil Hubble, Akrometrix and Gary A. Brist, Intel CorporationEstimated reading time: 1 minute
Editor’s Note: This paper was originally published in the Proceedings of IPC APEX EXPO 2024.
Background
As CPU and GPU packages grow larger and contain higher pin/ball counts, the importance of managing the printed circuit board (PCB) surface coplanarity for package assembly increases. The PCB surface coplanarity under a package is a product of both the global bow/twist of the PCB and the local surface topography under the package. In general, the surface topography is dependent the choice of material and layer stackup and the interaction between the innerlayer copper patterns and prepreg resin flow.
Advances in chiplet design and heterogeneous integration solutions in electronic packaging are enabling complex packages with increasing total die areas, resulting in the need for larger CPU and GPU packages1. Based on trends and advances in package integration, it is expected that future packages exceeding 100–120 mm on a package edge will become more common. This increases the challenge of the second-level interconnect (SLI) assembly processes when attaching the package to the PCB due to the combined coplanarity and topography variations of the PCB and package. These combined influences between the PCB and package are the key drivers of SLI defects such as solder bridging or solder joint opens during PCB assembly.2,3 Figure 1 is a graphical depiction of how the global PCB warpage or curvature under the package must be smaller for larger packages to achieve the same PCB coplanarity under the package.
Figure 1: PCB coplanarity under package.
The characterization of PCB coplanarity under the package footprint has been studied historically, including influences of assembly temperatures on dynamic PCB coplanarity as the PCB and package move together through the assembly reflow temperature profile.4,5,6 Other works have shown how the choice of PCB materials, fabrication process conditions, and design each impact global PCB bow/twist and warpage7.
To continue reading this article, which originally published in the September 2024 SMT007 Magazine, click here.
Share on:
Suggested Items
Dana on Data: Resurrecting IPC Class 1
10/01/2024 | Dana Korf -- Column: Dana on DataIPC specifications and guidelines have been the standard performance, quality, acceptance, and design basis for PCB designs for approximately two generations. They have proven to be conservative enough that PCBs far exceed their expected lifetimes in a multitude of environments. Requirements are continually adjusted to reflect improvements in materials and process capability that match the increasing component, interconnect, and cost reduction demands.
American Standard Circuits and Sunstone Now Offering Online Flex PCB Quoting
10/01/2024 | American Standard CircuitsAnaya Vardya President and CEO of American Standard Circuits and ASC Sunstone Circuits announced that his company will now be offering their customers the convenience of Instant Online Quoting for Flex PCBs through Sunstone’s OneQuote form.
EMA Webinar: Maximize Your Design Productivity in OrCAD X and Allegro X
09/26/2024 | EMA Design AutomationLearn how the extensible environment in Cadence OrCAD X and Allegro X is being used to enhance and customize the PCB design flow in a webinar held by EMA on Tuesday, October 1st, 2024 @ 11am ET.
Real Time with... SMTA Guadalajara 2024: From Taiwan to Mexico: TRI's Expansion
09/26/2024 | Real Time with... SMTA GuadalajaraSpeaking with Nolan Johnson is Fernando Salomon, sales manager for Test Research, Inc., discussing TRI's increasing presence in Mexico, particularly in Guadalajara. Salomon explains that TRI recognizes the importance of the Mexican market and has invested in local offices and staff.
Real Time with... SMTA Guadalajara 2024: Automation and Precision in Electronics Testing with SPEA
09/25/2024 | Real Time with... SMTA GuadalajaraIn this conversation with Nolan Johnson, Ferdinando Esposito, Branch Manager for SPEA Mexico, delves into the advancements and market trends in electronic testing equipment. Esposito discusses the new products SPEA has brought to the show, including their high-throughput ICT testers and miniaturized flying probes.