Battling Counterfeit Electronics in Manufacturing
October 7, 2024 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
Paul Jarski, product development manufacturing leader at Case New Holland (CNH), discusses his extensive experience with counterfeit electronics throughout his career. He highlights the challenges faced during market allocations, where counterfeit parts infiltrated supply chains and causing significant issues. Paul recounts the rigorous processes implemented to detect and prevent counterfeits, including advanced material analysis and testing. Counterfeit parts occasionally slipped through despite these measures, leading to costly and time-consuming audits and verifications to ensure product integrity and safety.
Nolan Johnson: Paul, tell me a little about your background.
Paul Jarski:
Paul Jarski: I currently work with large and compact tractors at CNH. I’m the liaison between the product development and manufacturing organizations.
Prior to this role, I’ve spent most of my career in agricultural technology, both with CNH and other companies. With the advances in farming technology, the development of rugged electronics equipment has been and continues to be a critical part of the business.
Johnson: So, you have an extensive background in managing counterfeiting issues.
Jarski: Yes. For most of my career, I have been involved in the manufacturing, quality, and supply chain portions of the AG electronics business. I started my career in this area as a process/quality engineer as a liaison between my company and EMS providers. We'd get a product stable and move it to the EMS provider. We still owned the design and controlled everything in the BOM, the AML.
We all know the electronics industry goes through allocations every three to four years. When that happened, we looked for parts. We went to the broker market if we couldn’t get them through normal chains.
I remember some of the first brokered parts we bought in the mid-2000s. After the 2008 economic meltdown, everybody in the electronics industry had slashed their capacity. For the ag industry, it was a blip. In the space of a year, we went from building at 100% capacity to cutting production to going all out and needing to increase equipment capacity. When everybody in the electronics component industry had cut capacity, we had to go to the broker market to find components. However, we also realized the inherent danger in this approach, so we knew we had to be careful of what we purchased.
When we purchased components from the secondary (broker) market, we started implementing checks to verify authenticity. I remember clearly some of the first counterfeits. As soon as they came in, we suspected something was wrong. The labels were poorly printed on the reels, the silk screening on the physical parts wasn't spelled correctly, and you could rub the labeling off the part. I remember us throwing some samples in the X-ray, only to find there was nothing inside. We saw a lot of crude stuff. If you had an X-ray and a cotton swab with acetone, you could tell if it was a counterfeit.
Fast forward to the next market allocation in the 2013-14 timeframe and we found that counterfeiters had advanced their game significantly.
To read this entire conversation, which appeared in the October 2024 issue of SMT007 Magazine, click here.
Suggested Items
Kimball Electronics Mexico Provides Shares for Local Preschool
09/09/2024 | Kimball ElectronicsKimball Electronics Mexico (KEMX) recently donated a shade net to the CAIC Nuevo Amanecer Preschool in the local community.
Quiet Power: An Evolution in PCB Design Costs
09/04/2024 | Istvan Novak -- Column: Quiet PowerIn this column, I want to cover my experiences, particularly where costs are concerned, with printed circuit boards from the 1960s to the present day. I grew up in an apartment building in downtown Budapest, where I began doing hobby projects building circuits from our kitchen table. Now, I’m lecturing about the most recent advances in signal integrity at Oxford University. We’ve come a long way. Over the decades, new technologies allowed users to have more layers, lower-loss dielectrics, fine-pitch surface connections, blind and buried vias, and HDI and HDI+ board constructions that allow us to design higher-performing systems. I expect this trend to continue.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
08/09/2024 | Marcy LaRont, PCB007 MagazineWe’ve finished the first full week of August, and now more than midway through summer. This week brought us quite a lot of military and aerospace news, with headlines from Airbus, Rocket Lab, AST Space Mobile, Menlo Microsystems, CACI, and L3 Harris. In other news, Pete Starkey takes us on a tour of RoBAT in England, highlighting the ever-important topic of high-technology SI testing.
In Memorium: Jim McElroy, iNEMI CEO
08/07/2024 | iNEMIIt is with great sadness that we share the news that Jim McElroy, former Executive Director and CEO of iNEMI, passed away on June 27, 2024.
A Culture of Thriving: SMT007 Magazine August 2024
08/01/2024 | I-Connect007 Editorial TeamOne cannot simply command thriving; it must be nurtured, developed, and encouraged. In this issue, we explore strategies to improve your working relationship model—both internally and externally—so you can grow your business in the process and create a culture of thriving.