Dan’s Biz Bookshelf: Four Important Books You Need to Read (Not Just Say You Have)
The Marketing Minute: Cracking the Code of Technical Marketing
iNEMI End-of-Project Webinar: Investigation of AI Enhancement to AOI for PCBA
October 25, 2024 | iNEMIEstimated reading time: 1 minute
Automated optical inspection (AOI) systems are essential in electronic manufacturing for ensuring the quality of printed circuit board assemblies (PCBAs). Traditional AOI systems, however, face significant challenges due to high false call rates and defect escapes, particularly as electronic designs become more complex. The integration of artificial intelligence (AI) has emerged as a promising solution to enhance the capabilities of AOI systems.
Phase 1 of iNEMI’s AI Enhancement to AOI for PCBA Project evaluated and recommended AI technologies for AOI. The project team surveyed the current state of AI and AOI technologies in the industry, established common performance metrics, and prepared test vehicles for subsequent experiments.
The recently completed Phase 2 of the project involved rigorous experimentation using the metrics and test vehicles established in Phase 1 to evaluate and validate the performance of AI-enhanced AOI systems. End-of-project webinars are scheduled on November 12 and 13 to report Phase 2 results and lessons learned. Challenges and future work in adopting AI into AOI will also be discussed.
Registration
These webinars are open to the public; advance registration is required (click here). Two sessions (with the same content) are scheduled.
Session 1
Tuesday, November 12, 2024
8:00-9:00 a.m. EST (US)
2:00-3:00 p.m. CET (Europe)
9:00-10:00 p.m. CST (China)
Session 2
Wednesday, November 13, 2024
9:00-10:00 a.m. CST (China)
8:00-9:00 p.m. EST (US) on November 12
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Breakthrough in Non-Contact Solder Removal Earns Kurtz Ersa 2025 Mexico Technology Award at SMTA Guadalajara
09/18/2025 | Kurtz Ersa Inc.Kurtz Ersa Inc., a leading supplier of electronics production equipment, is proud to announce that it has been awarded a 2025 Mexico Technology Award in the category of Rework & Repair for its HR 600P Automatic Rework System.
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
09/17/2025 | Nash Bell -- Column: Knocking Down the Bone PileElectronic component salvaging is the practice of recovering high-value devices from PCBs taken from obsolete or superseded electronic products. These components can be reused in new assemblies, reducing dependence on newly purchased parts that may be costly or subject to long lead times.
On the Line With… Podcast: UHDI and RF Performance
09/17/2025 | I-Connect007I-Connect007 is excited to announce the release of a new episode in its latest On the Line with... podcast series, which shines a spotlight on one of the most important emerging innovations in electronics manufacturing: Ultra-High-Density Interconnect (UHDI).
The Marketing Minute: Cracking the Code of Technical Marketing
09/17/2025 | Brittany Martin -- Column: The Marketing MinuteMarketing is never a one-size-fits-all endeavor, but the challenges are magnified for highly technical industries like electronics. Products and processes are complex, audiences are diverse, and the stakes are high, especially when your customers are engineers, decision-makers, and global partners who depend on your expertise.
EV Group Achieves Breakthrough in Hybrid Bonding Overlay Control for Chiplet Integration
09/12/2025 | EV GroupEV Group (EVG), a leading provider of innovative process solutions and expertise serving leading-edge and future semiconductor designs and chip integration schemes, today unveiled the EVG®40 D2W—the first dedicated die-to-wafer overlay metrology platform to deliver 100 percent die overlay measurement on 300-mm wafers at high precision and speeds needed for production environments. With up to 15X higher throughput than EVG’s industry benchmark EVG®40 NT2 system designed for hybrid wafer bonding metrology, the new EVG40 D2W enables chipmakers to verify die placement accuracy and take rapid corrective action, improving process control and yield in high-volume manufacturing (HVM).