American Made Advocacy: Smart Policies Can Ensure AI Data Centers Are Secure
Beyond the Board: Early Engagement Means Faster Prototyping for Defense Programs
Defense Speak Interpreted: The Autonomous Plane Battle—Skyborg Vs. Loyal Wingman
TTM Technologies Reports Q3 2024 Results
October 31, 2024 | TTM TechnologiesEstimated reading time: 3 minutes
TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies and printed circuit boards (PCBs) reported results for the third quarter 2024, which ended on September 30, 2024.
Third Quarter 2024 Highlights
- Net sales were $616.5 million
- GAAP net income of $14.3 million, or $0.14 per diluted share
- Non-GAAP net income was $42.7 million, or $0.41 per diluted share, inclusive of a $17.8 million pre-tax, non-operational, foreign exchange loss
- Cash flow from operations was $65.1 million, or 10.6% of sales
- Book to bill of 1.20 for the third quarter
- A&D program backlog a record $1.49 billion
- Third Quarter 2024 GAAP Financial Results
Net sales for the third quarter of 2024 were $616.5 million, compared to $572.6 million in the third quarter of 2023.
GAAP operating income for the third quarter of 2024 was $51.0 million compared to GAAP operating loss for the third quarter of 2023 of $10.2 million, inclusive of a $44.1 million goodwill impairment charge related to the RF&S Components segment.
GAAP net income for the third quarter of 2024 was $14.3 million, or $0.14 per diluted share, compared to GAAP net loss for the third quarter of 2023 of $37.1 million, or ($0.36) per diluted share. GAAP net income for the third quarter of 2024 included a $17.8 million pre-tax foreign exchange loss, compared to a $0.9 million pre-tax foreign exchange gain in the third quarter of 2023.
Third Quarter 2024 Non-GAAP Financial Results
On a non-GAAP basis, net income for the third quarter of 2024 was $42.7 million, or $0.41 per diluted share. This compares to non-GAAP net income of $44.9 million, or $0.43 per diluted share, for the third quarter of 2023. Non-GAAP net income for the third quarter of 2024 included a $17.8 million pre-tax foreign exchange loss, compared to a $0.9 million pre-tax foreign exchange gain in the third quarter of 2023.
Adjusted EBITDA in the third quarter of 2024 was $84.4 million, or 13.7% of sales compared to adjusted EBITDA of $84.1 million, or 14.7% of sales for the third quarter of 2023. Adjusted EBITDA for the third quarter of 2024 included a $17.8 million foreign exchange loss, compared to a $0.9 million foreign exchange gain in the third quarter of 2023.
“TTM delivered strong operating margin performance due to higher revenues, favorable mix, and outstanding operational execution. Revenues reflected the third consecutive quarter of year on year growth due to demand strength in our Aerospace and Defense and Data Center Computing end markets, the latter being driven by generative AI,” said Tom Edman, CEO of TTM. “In addition, cash flow from operations was a healthy 10.6% of revenues enabling the company to maintain a solid balance sheet with a net leverage ratio of 1.4x,” concluded Mr. Edman.
Business Outlook
For the fourth quarter of 2024, TTM estimates that revenues will be in the range of $610 million to $650 million, and non-GAAP net income will be in the range of $0.44 to $0.50 per diluted share.
With respect to the Company’s outlook for non-GAAP net income per diluted share, we are unable to predict with reasonable certainty or without unreasonable effort certain items that may affect a comparable measure calculated and presented in accordance with GAAP. Our expected non-GAAP net income per diluted share excludes primarily the future impact of restructuring actions, impairment charges, unusual gains and losses, and tax adjustments. These reconciling items are highly variable and difficult to predict due to various factors outside of management’s control and could have a material impact on our future period net income per diluted share calculated and presented in accordance with GAAP. Accordingly, a reconciliation of non-GAAP net income per diluted share to a comparable measure calculated and presented in accordance with GAAP has not been provided because the Company is unable to provide such reconciliation without unreasonable effort. For the same reasons, TTM is unable to address the probable significance of the information.
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Aircraft Wire and Cable Market to surpass USD 3.2 Billion by 2034
10/30/2025 | Global Market Insights Inc.The global aircraft wire and cable market was valued at USD 1.8 billion in 2024 and is estimated to grow at a CAGR of 5.9% to reach USD 3.2 billion by 2034, according to recent report by Global Market Insights Inc.
The Training Connection Continues to Grow with Addition of Veteran IPC Trainer Bill Graver
10/30/2025 | The Training Connection LLCThe Training Connection, LLC (TTC-LLC), a premier provider of test engineering and development training, is proud to announce the addition of Bill Graver to its growing team of industry experts. A respected professional with more than 35 years in electronics manufacturing, Bill joins as an IPC Master Trainer, bringing a wealth of hands-on experience in PCB testing, failure analysis, and process improvement.
I-Connect007 Welcomes New Columnist: Leo Lambert, EPTAC
10/30/2025 | I-Connect007I-Connect007 is excited to announce a column by Leo Lambert, an industry veteran with 40 years of experience, an award winner, and technical director at EPTAC. This column, Learning With Leo, will explore the evolution and related challenges of electronics product assembly, especially as it relates to training.
On the Line With… Ultra HDI Podcast—Episode 7: “Solder Mask: Beyond the Traces,” Now Available
10/31/2025 | I-Connect007I-Connect007 is excited to announce the release of the seventh episode of its 12-part podcast series, On the Line With… American Standard Circuits: Ultra HDI. In this episode, “Solder Mask: Beyond the Traces,” host Nolan Johnson sits down with John Johnson, Director of Quality and Advanced Technology at American Standard Circuits, to explore the essential role that solder mask plays in the Ultra HDI (UHDI) manufacturing process.
AI Triggers Next Paradigm Shift in PDN
10/23/2025 | Istvan Novak, SamtecArtificial intelligence (AI), together with machine learning (ML), is creating an unprecedented surge of computing and networking infrastructure needs. This, in turn, has dramatically increased the power consumption of computing and networking chips.