The Chemical Connection: Onshoring PCB Production—Daunting but Certainly Possible
Marcy’s Musings: The Legislative Outlook—Helping or Hurting?
It’s Only Common Sense: The Phone Is Still Mightier Than the Keyboard
Rehm Thermal Systems Mexico Wins the Mexico Technology Award 2024 in the Category Convection Soldering
November 13, 2024 | Rehm Thermal SystemsEstimated reading time: 1 minute
Rehm Thermal Systems Mexico has won the Mexico Technology Award in the category convection soldering with the patented mechatronic curtain for convection soldering systems. The award ceremony took place on 11 September 2024 before the start of SMTA Guadalajara in Mexico.
The Mexico Technology Awards, organized annually by Mexico EMS, recognize companies that drive technical innovation, increase productivity, improve manufacturing quality and deliver cost-effective solutions.
State of the art
Due to the variety of electronic component geometries, the assembly height varies from 5 to 30 mm. These differences lead to the requirement that the throughput height for a convection soldering system is specified as 30 mm upwards and 20 mm downwards.
In addition, e-mobility, for example, has also led to a recognizable need for throughput heights of 50 to 100 mm upwards. This requirement results in an increasing open area at the entrance and exit of the convection soldering system, thereby drastically increasing the consumption of nitrogen necessary for process inertization.
The histogram in figure 2 illustrates that there are assemblies with a total height of up to 30 mm. However, there are predominantly assemblies that are no higher than 7 mm and for which the throughput heights are oversized, resulting in more nitrogen escaping from the system than would be the case with a curtain design optimized to this height.
Solution approach
To achieve both the maximum required throughput height and the always optimal nitrogen consumption for lower assemblies, Rehm Thermal Systems has patented, developed and mass-produced the mechatronic curtain. In the process, movable curtains are installed at the inlet and outlet of the oven, which guarantee the optimal distance to the assembly depending on its height.
Figure 3 shows an example of the savings achieved for an assembly 244 mm wide, 305 mm long and 7 mm high: at 500 ppm residual oxygen, approx. 27 % and at 1000 ppm approx. 20 % of the nitrogen is saved.
The awards ceremony brought together industry leaders, innovators and professionals to celebrate the latest technological advances and achievements in electronics manufacturing. “We are honored to receive the Mexico Technology Award for our patented mechatronic curtain for convection soldering systems,” said Luis García, Managing Director of Rehm Thermal Systems Mexico. “This award is a testament to how hard our team has worked to develop a more efficient system for our customers.”
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Electronics Industry Warns Mexico Tariffs Could Undercut U.S. Manufacturing and Supply Chain Resilience
10/24/2025 | Global Electronics AssociationAs negotiations over U.S.–Mexico trade policies near an October 29 deadline, the Global Electronics Association released a new policy brief, From Risk to Resilience: Why Mexico Matters to U.S. Manufacturing.
Rehm Wins Mexico Technology Award for CondensoXLine with Formic Acid
10/17/2025 | Rehm Thermal SystemsModern electronics manufacturing requires technologies with high reliability. By using formic acid in convection, condensation, and contact soldering, Rehm Thermal Systems’ equipment ensures reliable, void-free solder joints — even when using flux-free solder pastes.
Thales Celebrates 60 Years in Mexico, Driving Technological Innovation and Local Development
10/17/2025 | ThalesSince 1965, Thales has been part of Mexico’s technological transformation. Today, with over 1,300 employees, it maintains a strong industrial presence that includes two production and personalization centers for payment cards and SIM/eSIM, an Air Traffic Management Service and Integration Center, and a Cyber Academy that trains professionals in cybersecurity.
KYZEN’s Eco-Friendly CYBERSOLV® 141-K Named Best in Class at 2025 Mexico Technology Awards
09/19/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, is proud to announce that its innovative solvent cleaner, CYBERSOLV® 141-K, has won a 2025 Mexico Technology Award in the Chemistries category.
DARPA, State of New Mexico Establish Framework to Advance Quantum Computing
09/08/2025 | DARPAAs part of the Quantum Benchmarking Initiative (QBI), DARPA signed an agreement with the State of New Mexico’s Economic Development Department to create the Quantum Frontier Project.