It’s Only Common Sense: Making 2025 the Best Sales Year Ever
Dan’s Biz Bookshelf: ‘Citizen Marketers: When People Are the Message’
The Right Approach: ‘Twas the Night Before Christmas (Harley-style)
SMT007 Magazine Explores Soldering Technologies—December 2024
December 2, 2024 | I-Connect007 Editorial TeamEstimated reading time: Less than a minute
Soldering is the heartbeat of assembly, and new developments are taking place to match the rest of the innovation in electronics. There are tried-and-true technologies for soldering. But new challenges in packaging, materials, and sustainability may be putting this key step in flux.
In the December 2024 issue of SMT007 Magazine, we explore some of the emerging soldering technologies: photonic, vacuum reflow and condensation soldering. And our columnists deep-dive into advanced packaging and international trade.
Learn more in this month’s issue of SMT007 Magazine.
Share on:
Suggested Items
IPC Announces UK Regional Qualification for Hand Soldering Competition
01/02/2025 | IPCIPC invites skilled soldering experts to participate in the UK Regional Qualification for the IPC Hand Soldering Competition (HSC) on February 4-6, 2025, at the Farnborough International Exhibition Centre.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Copyright © 2025 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in