Global PCB Connections: Rigid-flex and Flexible PCBs—The Backbone of Modern Electronics
Flexible Thinking: The Key to a Successful Flex Circuit Design Transfer
Happy’s Tech Talk #29: Bend-to-Install Semi-flex FR-4
MANA Develops Ferroelectric-ferromagnetic Materials for Next-generation Electronics
January 7, 2025 | PRNewswireEstimated reading time: 1 minute
Researchers at the Research Center for Materials Nanoarchitectonics (MANA) have proposed a method to create ferroelectric-ferromagnetic materials, opening doors to advancing spintronics and memory devices.
In 1831, Michael Faraday discovered the fundamental connection between electricity and magnetism, demonstrating that a changing magnetic field induces electric current in a conductor.
In a recent study, MANA researchers have proposed a method for designing ferroelectric-ferromagnetic (FE-FM) materials, which exhibit both ferroelectric and ferromagnetic properties, enabling the manipulation of magnetic properties using electric fields and vice versa. Such materials are highly promising for spintronics and memory devices. The advantage of FE-FM materials, extremely rare in nature, is their ability to achieve the cross-control by relatively low electric and magnetic fields. The study, led by Principal Researcher Igor Solovyev from MANA, NIMS, included contributions from Dr. Ryota Ono from MANA, NIMS, and Dr. Sergey Nikolaev from the University of Osaka, Japan.
Ferroelectric materials possess a permanent electric polarization, usually arising from ion displacement in their crystalline lattice and resulting in the formation of charged electric dipoles, which align in the same direction. The key feature of ferromagnetic materials is the uncompensated magnetic moment produced by electron spins and orbital motion. Combining both properties in a single material is challenging since the ion displacement enabling ferroelectricity can disrupt the magnetic ordering needed for ferromagnetism. Similarly, the ferromagnetic alignment of magnetic moments is not sufficient for breaking the spatial inversion symmetry required for producing ferroelectricity.
The authors of the current study proposed that antiferro orbital ordering, driven by the Kugel-Khomskii mechanism, where electrons tend to occupy alternating orbitals, can promote both ferromagnetic interactions and break the inversion symmetry. When tested on VI3, a van der Waals ferromagnet with a honeycomb structure, this ordering resulted in an FE-FM ground state.
"By properly arranging occupied atomic orbitals in a solid, one can make the material not only ferromagnetic but also ferroelectric," says Dr. Solovyev, highlighting the potential of this approach for developing next-generation electronic devices based on multiferroic materials and ferroelectric ferromagnets.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production
10/28/2025 | Kurt Palmer -- Column: Driving InnovationRigid-flex printed circuit boards are a highly effective solution for placing complex circuitry in tight, three-dimensional spaces. They are now indispensable across a range of industries, from medical devices and aerospace to advanced consumer electronics, helping designers make the most efficient use of available space. However, their unique construction—combining rigid and flexible materials—presents a fundamental challenge for PCB manufacturers.
SMTAI 2025 Review: Reflecting on a Pragmatic and Forward-looking Industry
10/27/2025 | Marcy LaRont, I-Connect007Leaving the show floor on the final afternoon of SMTA International last week in Rosemont, Illinois, it was clear that the show remains a grounded, technically driven event that delivers a solid program, good networking, and an easy space to commune with industry colleagues and meet with customers.
ITW EAE Despatch Ovens Now Support ASTM 5423 Testing
10/15/2025 | ITW EAEAs the demand for high-performance electrical insulation materials continues to grow—driven by the rapid expansion of electric vehicles (EVs) and energy storage systems—thermal processing has become a critical step in material development.
Beyond Thermal Conductivity: Exploring Polymer-based TIM Strategies for High-power-density Electronics
10/13/2025 | Padmanabha Shakthivelu and Nico Bruijnis, MacDermid Alpha Electronics SolutionsAs power density and thermal loads continue to increase, effective thermal management becomes increasingly important. Rapid and efficient heat transfer from power semiconductor chip packages is essential for achieving optimal performance and ensuring long-term reliability of temperature-sensitive components. This is particularly crucial in power systems that support advanced applications such as green energy generation, electric vehicles, aerospace, and defense, along with high-speed computing for data centers and artificial intelligence (AI).
Is Glass Finally Coming of Age?
10/13/2025 | Nolan Johnson, I-Connect007Substrates, by definition, form the base of all electronic devices. Whether discussing silicon wafers for semiconductors, glass-and-epoxy materials in printed circuits, or the base of choice for interposers, all these materials function as substrates. While other substrates have come and gone, silicon and FR-4 have remained the de facto standards for the industry.