Trouble in Your Tank: Organic Addition Agents in Electrolytic Copper Plating
It’s Only Common Sense: Selling During an Economic Downturn
Marcy’s Musings: Can You Hear the Voices?
January 2025 Issue of Design007 Magazine: The Designer of the Future
January 13, 2025 | I-Connect007 Editorial TeamEstimated reading time: Less than a minute
The Designer of the Future
As we enter the new year, it’s a great time to be a PCB designer. The job is more complex than ever, and a lot of fun too. We can only wonder what the PCB designers of 1975 would think about the typical PCB designer’s workday. What will the designers' job be like in the future?
In the January 2025 issue of Design007 Magazine, our expert contributors peer into their crystal balls and offer their thoughts on the designers and design engineers of tomorrow, and what their jobs will look like.
Share on:
Suggested Items
Material Selection and RF Design
04/21/2025 | Andy Shaughnessy, Design007 MagazineInnovation rarely sleeps in this industry, and the RF laminate segment offers a perfect example. RF materials have continued to evolve, providing PCB designers much more than an either/or choice. I asked materials expert Alun Morgan, technology ambassador for the Ventec International Group, to walk us through the available RF material sets and how smart material selection can ease the burden on RF designers and design engineers.
EDA Tools and RF Design Techniques
04/14/2025 | Andy Shaughnessy, Design007 MagazineHigh-speed PCB design is complex enough, but RF design can be a whole new ball game. RF designers have to contend with tuning and other ideas that traditional PCB designers don’t have to worry about, as well as crosstalk, parasitic capacitance, and material limitations. Most PCB design tool companies now offer RF design options, so designers no longer have to use pureplay RF design tools for anything but the most cutting-edge designs. Cadence Design Systems expanded its RF EDA offerings by acquiring the RF software company AWR a few years ago. We asked David Vye, product management director at Cadence, to share his thoughts on EDA software, RF design, and what new RF designers and engineers need to understand.
The Key to First-pass Success in PCB Design
04/10/2025 | Gerry Partida, Summit InterconnectIn the dynamic world of PCB manufacturing, achieving first-pass success hinges on more than just cutting-edge equipment and skilled teams. At Summit Interconnect, we have seen countless successful launches of advanced HDI designs that can be traced directly to engagement between designers and fabricators early in the design phase. Unfortunately, collaboration in the PCB industry often begins only after problems arise—such as field failures, assembly fallout, or low fabrication yields. This reactive approach is the wrong starting point for collaboration.
Real Time with... IPC APEX EXPO 2025: Insights into PCB Design and Manufacturing with Polar Instruments
04/03/2025 | Real Time with...IPC APEX EXPOErik Bateham discusses Polar's latest book, which enhances insights for PCB designers and manufacturers. The book, "The Designer's Guide to... More Secrets of High-Speed PCBs," features a guest chapter on 2D via design modeling. Erik highlights the industry's shift towards UHDI and the challenges in measuring at micron levels.
Target Condition: Designing vs. Inventing
03/27/2025 | Kelly Dack -- Column: Target ConditionAfter hearing me rave about IPC APEX EXPO for years, my boss, Chad Orebaugh, joined me at the show for the first time last year. We met at the registration counter, got our badges, and he said, “Okay, Kelly, impress me.”
Copyright © 2025 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in