Beyond the Board: What Companies Need to Know Before Entering the MilAero PCB Market
Defense Speak Interpreted: If CHIPS Cuts Back, What Happens to Electronics Packaging Funds?
American Made Advocacy: Where’s the Budget for a Modern Military Run on Microelectronics?
Dan Beeker on the Design Engineer of the Future
February 7, 2025 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
As technical director at NXP Semiconductors, Dan Beeker specializes in EMC and signal integrity design techniques. He’s known for his field-based design classes; you may remember the cover of Meghan Trainor’s “All About That Bass” that Dan and his daughter Breezy released in 2015 titled “All About The Space.” Check it out on YouTube; it’s funny, and it definitely gets the point across.
As we begin 2025, I contacted Dan to get his thoughts about the design engineers of the future. What will their jobs look like?
Andy Shaughnessy: Dan, how will the typical PCB design engineer’s job evolve over the next five to 10 years?
Dan Beeker: The challenges will be driven by the changes in technology. Smaller IC geometries for transistors and packages and increased power supply requirements make the basic functional design more challenging. Evolving standards for reduced allowable radiated emission levels and increased levels of immunity will impact compliance.
A solid understanding of the underlying science of electromagnetic physics will be more critical than ever. Improvements in the design tool space may help, but until the tools are dielectric-aware and can manage the entire three-dimensional structure of the electronic control system, they will only provide false hope. Careful empirical evaluation of each design will still be the primary method for designing good PCBs.
To read this entire conversation, which appeared in the January 2025 issue of Design007 Magazine, click here.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
09/17/2025 | Nash Bell -- Column: Knocking Down the Bone PileElectronic component salvaging is the practice of recovering high-value devices from PCBs taken from obsolete or superseded electronic products. These components can be reused in new assemblies, reducing dependence on newly purchased parts that may be costly or subject to long lead times.
On the Line With… Podcast: UHDI and RF Performance
09/17/2025 | I-Connect007I-Connect007 is excited to announce the release of a new episode in its latest On the Line with... podcast series, which shines a spotlight on one of the most important emerging innovations in electronics manufacturing: Ultra-High-Density Interconnect (UHDI).
The Marketing Minute: Cracking the Code of Technical Marketing
09/17/2025 | Brittany Martin -- Column: The Marketing MinuteMarketing is never a one-size-fits-all endeavor, but the challenges are magnified for highly technical industries like electronics. Products and processes are complex, audiences are diverse, and the stakes are high, especially when your customers are engineers, decision-makers, and global partners who depend on your expertise.
EV Group Achieves Breakthrough in Hybrid Bonding Overlay Control for Chiplet Integration
09/12/2025 | EV GroupEV Group (EVG), a leading provider of innovative process solutions and expertise serving leading-edge and future semiconductor designs and chip integration schemes, today unveiled the EVG®40 D2W—the first dedicated die-to-wafer overlay metrology platform to deliver 100 percent die overlay measurement on 300-mm wafers at high precision and speeds needed for production environments. With up to 15X higher throughput than EVG’s industry benchmark EVG®40 NT2 system designed for hybrid wafer bonding metrology, the new EVG40 D2W enables chipmakers to verify die placement accuracy and take rapid corrective action, improving process control and yield in high-volume manufacturing (HVM).
ROHM Develops Ultra-Compact CMOS Op Amp: Delivering Industry-Leading Ultra-Low Circuit Current
09/11/2025 | ROHMROHM’s ultra-compact CMOS Operational Amplifier (op amp) TLR1901GXZ achieves the industry’s lowest operating circuit current.