Trouble in Your Tank: Organic Addition Agents in Electrolytic Copper Plating
It’s Only Common Sense: Selling During an Economic Downturn
Marcy’s Musings: Can You Hear the Voices?
epoxySet Launches UV-8675 – Deep Section, UV Cured Adhesive for PVC
February 19, 2025 | epoxySetEstimated reading time: Less than a minute
epoxySet introduces the UV-8675, acrylated urethane adhesive for bonding PVC, polycarbonate and most other plastics. Designed for bonding PVC tubing in medical devices, it also bonds well to glass and metals. This semirigid polymer offers high bond strength without causing stress cracks. UV-8675 can be cured in thicknesses from 10um and up to 10mm. It can be used in very tight adhesive applications as well as for larger gap filling.
The UV-8675 is low to medium viscosity matrix that can be easily dispensed by hand or pneumatic machine. With a cure of under 10 seconds (365nm, LED or broadband light), it produces a tough, high strength adhesive with an elongation of 210% and is excellent for temperature cycling from -40 to 85°C.
UV-8675 is available in 3, 10 and 30cc syringes as well as 8oz, 1 liter bottles, gallon and pails. UV -8685 is non-hazardous for shipping and has a shelf life of one year at room temperature.
Share on:
Suggested Items
Incap Empowers the Next Generation of Skilled Professionals at Taitaja 2025
04/21/2025 | IncapIncap Corporation is proud to support the Taitaja 2025 Championship of vocational skills, Finland’s largest annual event dedicated to vocational education and training.
Cicor Acquires Significant Business Activities of Éolane
04/21/2025 | CicorCicor Group announces that its offer for the acquisition of significant business activities of the French Éolane Group has been accepted by the Paris Commercial Court. This strategic transaction marks a milestone in the execution of Cicor's pan-European growth strategy and further strengthens its market leadership in the aerospace and defence sector.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/18/2025 | Andy Shaughnessy, Design007 MagazineIt’s been a busy week in our industry. Never a dull moment! If you’ve been paying attention to our tariff tumult with China and its effect on the stock market, especially if your company does a lot of business with China, you might be tempted to call in a Xanax refill about now. But hang tight. This is still early in the first quarter. This brouhaha serves to underscore our need to manufacture critical laminates and components in the U.S. In this week’s must-reads, we have a potpourri of articles covering tariffs, the next generation of HDI, the three-year anniversary of IPC Mexico, a novel green technology, and emerging design trends.
Real Time with... IPC APEX EXPO 2025: Aster–Enhancing Design for Effective Testing Strategies
04/18/2025 | Real Time with...IPC APEX EXPOWill Webb, technical director at Aster, stresses the importance of testability in design, emphasizing early engagement to identify testing issues. This discussion covers the integration of testing with Industry 4.0, the need for good test coverage, and adherence to industry standards. Innovations like boundary scan testing and new tools for cluster testing are introduced, highlighting advancements in optimizing testing workflows and collaboration with other tools.
IPC President's Award: Barry Matties
04/21/2025 | Pete Starkey, I-Connect007The IPC President’s Award is given to IPC members who have exhibited ongoing leadership in IPC and have made significant contributions of their time and talent to the association and the electronic interconnect industry. Individuals can receive this award only once. Barry Matties has been a leading global force in publishing content about the electronics industry for nearly 40 years. He began his publishing career as a co-founder of CircuiTree Magazine in 1987, which became the leading printed trade journal serving the PCB industry.