-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
Indium Experts to Present on Solder and Thermal Solutions at APEX 2025
March 7, 2025 | Indium CorporationEstimated reading time: 1 minute

As a global supplier of solder and thermal interface material (TIM) products, Indium Corporation experts are proud to share their technical insight and knowledge on a variety of industry-related topics at IPC APEX Expo, March 18-20 in Anaheim, California.
Tuesday, March 18
Achieving Lower Voids with a Novel Preform Flux Technology, presented by Research Chemist David Bedner, and co-authored by Lee Kresge, Igor Faleichik, Dan McElhinney, and Dr. Ricky McDonough.
- This presentation introduces a next-generation preform flux that significantly reduces voiding in solder joints, enhancing thermal performance and reliability across various applications, with testing demonstrating up to a 67% reduction in voids under optimized reflow conditions.
Wednesday, March 19
Enhancing PCB Reliability: Voiding Reduction Design with a Mixed-Alloy Solder, presented by Technical Support Engineer Thuy Nguyen, and co-authored by Dr. Hongwen Zhang, Dr. Ronald C. Lasky, and Adam Murling.
- This presentation explores the development of novel mixed-alloy solder paste Durafuse® HR, which reduces voiding while maintaining high-reliability thermal cycling performance, offering improved solutions for automotive, high-performance computing, and 5G communication applications.
Novel Supercooled Solder Materials for Lower-Than-Liquidus Reflow presented by R&D Manager Dr. Ian Tevis, co-authored by Dr. Yifan Wu and Radhika Jadhav.
- This presentation showcases the development of supercooled solder pastes using core-shell bismuth-tin (BiSn) particles, enabling reliable solder interconnects at temperatures 40°C lower than conventional reflow profiles, making them ideal for future electronics manufacturing and temperature-sensitive applications.
Liquid Metal Paste High-Speed Dispensing for High-Volume Manufacturing – Part II, co-presented by Senior Product Specialist Miloš Lazić and Sunny Agarwal, ITW EAE. Co-authored by Dr. Ricky McDonough.
- This presentation examines the advancements in liquid metal paste (LMP) technology, showcasing its enhanced thermal conductivity and adaptability for high-performance computing applications, while addressing challenges associated with traditional liquid metal thermal interface materials (TIMs).
Phase-Change Metal (PCM) TIMs for Enhanced Thermal Management – Part II, presented by Miloš Lazić, co-authored by Dr. Ricky McDonough and Bob Jarrett.
- This presentation introduces newly developed gallium-based and gallium-free phase-change metal (PCM) TIMs, designed to remain in a liquid state at operating temperature, delivering exceptionally low thermal resistance. Power cycling and HAST data highlight their robust performance and underscore the necessity of containment strategies, while gallium-free solutions enable compatibility with aluminum heat-sinks.
Suggested Items
BEST Inc. Introduces StikNPeel Rework Stencil for Fast, Simple and Reliable Solder Paste Printing
06/02/2025 | BEST Inc.BEST Inc., a leader in electronic component rework services, training, and products is pleased to introduce StikNPeel™ rework stencils. This innovative product is designed for printing solder paste for placement of gull wing devices such as quad flat packs (QFPs) or bottom terminated components.
See TopLine’s Next Gen Braided Solder Column Technology at SPACE TECH EXPO 2025
05/28/2025 | TopLineAerospace and Defense applications in demanding environments have a solution now in TopLine’s Braided Solder Columns, which can withstand the rigors of deep space cold and cryogenic environments.
INEMI Interim Report: Interconnection Modeling and Simulation Results for Low-Temp Materials in First-Level Interconnect
05/30/2025 | iNEMIOne of the greatest challenges of integrating different types of silicon, memory, and other extended processing units (XPUs) in a single package is in attaching these various types of chips in a reliable way.
E-tronix Announces Upcoming Webinar with ELMOTEC: Optimizing Soldering Quality and Efficiency with Robotic Automation
05/30/2025 | E-tronixE-tronix, a Stromberg Company, is excited to host an informative webinar presented by Raphael Luchs, CEO of ELMOTEC, titled "Optimize Soldering Quality and Efficiency with Robotic Automation," taking place on Wednesday, June 4, 2025 at 12:00 PM CDT.
CE3S Launches EcoClaim Solutions to Simplify Recycling and Promote Sustainable Manufacturing
05/29/2025 | CE3SCumberland Electronics Strategic Supply Solutions (CE3S), your strategic sourcing, professional solutions and distribution partner, is proud to announce the official launch of EcoClaim™ Solutions, a comprehensive recycling program designed to make responsible disposal of materials easier, more efficient, and more accessible for manufacturers.