-
-
News
News Highlights
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
SigmaTron Reports Financial Results for Q3 of Fiscal 2025
March 17, 2025 | SigmaTron International Inc.Estimated reading time: 3 minutes
SigmaTron International, Inc., an electronic manufacturing services company, reported revenues and earnings for the fiscal quarter ended January 31, 2025.
For the three month period ended January 31, 2025, revenues decreased $24.8 million, or 26 percent, to $71.1 million compared to $95.9 million for the same quarter in the prior year. Net income for the three month period ended January 31, 2025 was $3.9 million compared to $0.6 million for the same period in the prior year. A gain of approximately $7.2 million was recorded during the third quarter related to the sale/leaseback transaction for the facility located in Elk Grove Village, Illinois. Basic and diluted income per share for the three month period ended January 31, 2025 was $0.63, compared to $0.10 for the same period in the prior year.
For the nine month period ended January 31, 2025, revenues decreased $62.1 million, or 21 percent, to $230.6 million, compared to $292.7 million for the same period in the prior year. Net income/(loss) for the nine month period ended January 31, 2025, was a net loss of $8.9 million, compared to net income of $0.9 million for the same period in the prior year. Approximately $3.3 million of expenses were recorded during the second quarter related to debt modification, expensing of deferred financing costs and lender warrants after remeasurement and another approximately $5.0 million noncash deferred tax charge was taken at that time. A gain of approximately $7.2 million was recorded during the third quarter related to the sale/leaseback transaction for the facility located in Elk Grove Village, Illinois. Basic and diluted income/(loss) per share for the nine month period ended January 31, 2025 was a loss of $1.44, compared to basic and diluted income per share of $0.15 and $0.14, respectively, for the same period in the prior year.
Commenting on the Company’s third quarter fiscal 2025 results, Gary R. Fairhead, Chief Executive Officer and Chairman of the Board, said, “As we discussed in our press release for the second quarter of FY2025, our revenue levels in the third quarter remained depressed and ended up slightly below that of the second quarter. The third quarter is historically weaker than the others due to the holiday period and we believe that the lower revenue was in part due to that. As mentioned above, we are reporting a profit for the third quarter, but that was helped by the sale/leaseback of our building in Elk Grove Village, Illinois that we completed in December 2024. Atypical items have now moved in both directions during the past two quarters.
Throughout this entire period of revenue decline, we have been reducing our cost structure and we believe that we are seeing the benefits of those efforts. To that point, we posted an operating profit in January 2025, and we believe that we have positioned the Company for significant upside of the operations going forward, both at a historical level of revenue and even at the recent lower revenue level. Like everyone else, we are tied to the general economic conditions, and we are starting to see some positive signs. The electronic component marketplace has started to normalize in terms of being consistent with shorter lead times and stable pricing and we have seen modest increases in demand from several of our customers. It is too early to call this a recovery, but we believe that we have reached the bottom of the revenue downturn and are starting the slow path upwards. We also believe that much of our customer’s excess inventory has been consumed and that should lead to less volatility on the revenue side. Based on our current backlog, we expect the revenue for the fourth quarter to be higher than the third quarter, which is encouraging. Also, on the operations side, we continue to focus on reducing inventory and successfully did that in the third quarter.
Given the nature of our business and our international footprint, we remain subject to the existing trade issues as well as those threatened by a potential new tariff policy. Changes in tariff policies are creating volatility that we are dealing with. We are working closely with our customers and supply chain on this issue and are hopeful that it will be resolved favorably for all parties involved. Finally, as previously disclosed, we continue to work with Lincoln International on strategic initiatives. We appreciate the support from our customers and the new opportunities we are working on with them, as well as our continuing good relationships with our supply chain.”
Suggested Items
TRI Unveils New Multi-Camera AOI, TR7500 SIII Ultra
07/01/2025 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, proudly introduces the new TR7500 SIII Ultra.
SMT007 Magazine July—What’s Your Competitive Sweet Spot?
07/01/2025 | I-Connect007 Editorial TeamAre you in a niche that’s growing or shrinking? Is it time to reassess and refocus? We spotlight companies thriving by redefining or reinforcing their niche—what are their insights? In the July 2025 issue of SMT007 Magazine, we spotlight companies thriving by redefining or reinforcing their niche and offer insights to help you evaluate your own.
TRI Unveils New Multi-Camera AOI, TR7500 SIII Ultra
06/27/2025 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, proudly introduces the new TR7500 SIII Ultra.
NVIDIA RTX PRO 6000 Shipments Expected to Rise Amid Market Uncertainties
06/24/2025 | TrendForceThe NVIDIA RTX PRO 6000 has recently generated significant buzz in the market, with expectations running high for strong shipment performance driven by solid demand.
Green Circuits Boosts Test Capacity with New Takaya APT-1600FD System
06/24/2025 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, is pleased to announce the purchase of its fourth Takaya APT-1600FD Double-sided Flying Probe Test System.