-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
Sypris Reports Fourth Quarter Results
March 27, 2025 | BUSINESS WIREEstimated reading time: 4 minutes
Sypris Solutions, Inc. reported financial results for its fourth quarter and full-year ended December 31, 2024.
Highlights:
- The Company’s gross profit for the quarter increased 23.1% from the prior-year period, while gross margin expanded 350 basis points.
- For the full year, the Company’s gross profit increased 15.3% from the prior year, while gross margin increased 150 basis points.
- Gross profit for Sypris Technologies surged 41.6% for the quarter and 39.3% for the full year, reflecting favorable exchange rates, improved mix and productivity improvements. Orders for energy products were up 8.6% year-to-date.
- EPS for the quarter increased $0.06 to $0.01 per diluted share, up from a loss of $0.05 per diluted share for the prior-year period.
- The Company announced its financial guidance for 2025, projecting revenue between $125-$135 million, gross margin expansion in the range of 150 to 175 basis points, and a forecast of 10-15% increase in gross profit. The revenue outlook partly reflects the conversion of certain shipments from our facility in Mexico to a value-add only sub-maquiladora basis.
“We are pleased with the year-over-year revenue growth at Sypris Technologies, driven by an increase in sales of our energy products during the period,” commented Jeffrey T. Gill, President and Chief Executive Officer. “Orders for our energy products increased during the year, and additional opportunities for growth may exist with new global projects in support of increasing LNG demand including support for the steep increase in electricity demand from data centers to support AI. We are also actively pursuing applications for our products in adjacent markets including CO2 capture to further diversify our industry and customer portfolios.
“Demand from Sypris Technologies customers serving the automotive, commercial vehicle, sport utility and off-highway markets has remained relatively stable, with new product line shipments helping to offset the anticipated cyclical decline for the commercial vehicle market. We believe that the market diversification Sypris Technologies has accomplished over recent years by adding new programs in the automotive, sport-utility and off-highway markets will help offset some of this decline.
“The backlog at Sypris Electronics exceeds $90 million and is expected to support growth through 2025 and beyond. Customer funding has already been secured for a significant portion of these key programs, which enables us to procure inventory under multi-year purchase orders to mitigate future supply chain issues.”
Fourth Quarter and Full-Year Results
The Company reported revenue of $33.4 million for the fourth quarter ended December 31, 2024, compared to $34.7 million for the prior-year comparable period. The Company reported net income of $0.1 million, or $0.01 per diluted share, compared to a net loss of $1.1 million, or $0.05 per diluted share, for the prior-year period.
For the full-year 2024, the Company reported revenue of $140.2 million compared with $136.2 million for the prior year. The Company reported a net loss of $1.7 million, or $0.08 per share, for 2024 compared with a net loss of $1.6 million, or $0.07 per diluted share, for the prior year.
Sypris Technologies
Revenue for Sypris Technologies was $19.5 million in the fourth quarter of 2024 compared to $19.0 million for the prior-year period, reflecting strong energy shipments during the period, partially offset by the anticipated cyclical decline in the commercial vehicle market. Gross profit for the fourth quarter of 2024 was $4.4 million, or 22.5% of revenue, compared to $3.1 million, or 16.3% of revenue, for the same period in 2023. Gross profit for the fourth quarter of 2024 benefited from a favorable mix and favorable exchange rates.
Sypris Electronics
Revenue for Sypris Electronics was $13.9 million in the fourth quarter of 2024 compared to $15.7 million for the prior-year period. Material delays and supplier quality issues caused a temporary delay in shipments for the period. Gross profit for the fourth quarter of 2024 was $1.0 million, or 7.1% of revenue, compared to $1.3 million, or 8.1% of revenue, for the same period in 2023 primarily due to the lower revenue, an unfavorable mix and additional labor and overhead costs incurred on programs that recently ramped production.
Outlook
Commenting on the future, Mr. Gill added, “Demand from customers serving the markets for electronic warfare, aircraft and missile avionics, secure and subsea communications, and ground-based radar remain robust, while the outlook for the energy market continues to move in the right direction. Similarly, demand from customers serving the automotive, commercial vehicle and sport utility markets remains healthy despite the anticipated cyclical decline in the commercial vehicle market.
“With a strong backlog, new program wins, and continued long-standing contractual relationships in place, we are confident 2025 has the potential to be very positive for Sypris. While we anticipate a modest decline in revenue reported resulting from the conversion of certain shipments from Mexico to the U.S. into a sub-maquiladora, and the cyclical decrease in production volumes in the commercial vehicle market, we expect the combined strength of our backlog for Sypris Electronics and increasing orders for our energy products to largely serve as an offset. Additionally, we expect to achieve gross margin expansion in the range of 150 to 175 basis points, with gross profit expected to grow 10-15% in 2025.”
Suggested Items
Zuken Vitech Announces GENESYS 2025: Advancing Interoperability and Usability in Model-Based Systems Engineering
06/10/2025 | ZukenZuken Vitech, a leading provider of model-based systems engineering (MBSE) solutions, is proud to announce the release of GENESYS 2025, the latest evolution of its flagship systems engineering platform.
Airbus Signs Contract to Equip German Air Force A400Ms with Infrared Protection Systems
06/09/2025 | AirbusAirbus has been awarded a contract from the German procurement agency Bundesamt für Ausrüstung, Informationstechnik und Nutzung der Bundeswehr (BAAINBw) to equip 23 Luftwaffe A400Ms with DIRCM protection systems.
Plexus Issues Fiscal 2024 Sustainability Report
06/06/2025 | PlexusPlexus Corp. released its fiscal 2024 Sustainability Report. The report, which is now available on the company’s Sustainability web page, highlights how Plexus’ commitment to sustainability and innovating responsibly is rooted in its values.
Siemens Announces PAVE360 Support for New Arm Zena Compute Subsystems
06/04/2025 | Siemens Digital Industries SoftwareSiemens Digital Industries Software announced today that it is expanding its longstanding relationship with Arm and adding support for the newly launched Arm® Zena™ Compute Subsystems (CSS) in its PAVE360™ software, designed for software-defined vehicles (SDV).
IPC Releases Latest Standards and Revisions Updates
06/05/2025 | IPCEach quarter, IPC releases a list of standards that are new or have been updated. To view a complete list of newly published standards and standards revisions, translations, proposed standards for ballot, final drafts for industry review, working drafts, and project approvals, visit ipc.org/status. These are the latest releases for Q1 2025.