Dan’s Biz Bookshelf: 'Hidden Potential: The Science of Achieving Greater Things'
Trouble in Your Tank: Minimizing Small-via Defects for High-reliability PCBs
It’s Only Common Sense: 20 Lessons in 20 Years—A Career in Common Sense
IPC APEX EXPO Newcomer: Faith DeSaulnier of TTM Technologies
April 3, 2025 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
During the Newcomer’s Welcome Reception at IPC APEX EXPO, the I-Connect Editorial Team spoke with several first-time attendees. The following is our interview with Faith DeSaulnier, a process engineer based at TTM Technologies’ facility in Forest Grove, Oregon.
Andy Shaughnessy: It’s nice to meet you, Faith. Tell us about your job at TTM.
Faith DeSaulnier: Sure. I am a process engineer in fabrication; I work in the routing and milling area. I'm also the backup for the drill engineer as well.
Michelle Te: Where did you go to school and what did you study?
DeSaulnier: I went to Oregon State University and studied mechanical engineering. I live in Salem, Oregon.
Shaughnessy: Is this the kind of job you were thinking of getting into?
DeSaulnier: I didn't even really know that circuit boards could be a career. It just wasn't on my mind. But once I got the job, I realized that this is definitely right up my alley. It's a really great job, and I love the company.
Shaughnessy: What do you think about the show so far?
DeSaulnier: It’s been great. There are so many options for committee meetings and technical meetings, and I'm really excited about the next couple of days.
Te: What kinds of things are you looking to do while you're here?
DeSaulnier: I'm looking to broaden my knowledge a little bit about IPC, and I will be looking at some of the exhibitors for like routers and things like that.
Te: Do you think you’ll get more involved in IPC?
DeSaulnier: Yes, I would love to get on a standards development committee. I need to figure out which committees are the best fit for me and possibly join one or two of them.
Te: Are you the type of person who would speak up in a meeting if you had a comment or some thoughts about the topic?
DeSaulnier: If I was very confident in something, then I would definitely speak up. If I was knowledgeable about the situation, I would say something, sure.
Shaughnessy: Thanks for speaking with us, Faith.
DeSaulnier: Thank you. I enjoyed it.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Target Condition: Floor Planning Without a Floor
08/27/2025 | Kelly Dack -- Column: Target ConditionBy a show of hands, how many PCB designers have been asked to start a layout without a board outline, keep-out zones, or even height constraints? How many have had to work within a specific enclosure before the schematic was finalized? If this sounds familiar, you're not alone. Starting a PCB layout without critical constraints is like hiring an interior designer to buy furniture and carpet for a house you haven’t even purchased yet, or, even worse, trying to fit four bedrooms' worth of furniture in a one-room cabin.
Marcy’s Musings: Continuing to Invent the Future With SEL
08/19/2025 | Marcy LaRont -- Column: Marcy's MusingsTwo years ago, PCB007 Magazine devoted an issue to Schweitzer Engineering Labs (SEL), a new captive greenfield PCB facility in Moscow, Idaho. We highlighted some of the most cutting-edge achievements in facility layout, design, and equipment in the PCB fabrication industry. SEL was a shining example of what was possible, providing insight and inspiration to PCB fabricators looking toward growth and expansion.
Advint and SanRex Expand High-Performance DC Rectifier Access for North American PCB Fabricators
08/12/2025 | Advint IncorporatedAdvint Incorporated has entered a strategic partnership with SanRex Corporation, enhancing access to industrial-grade DC rectifiers for the US printed circuit board industry. With a legacy of power innovation and performance across the globe, SanRex rectifiers are available through Advint’s proficient distribution network.
Getting Our ‘Fil’ of Design Constraint Techniques
08/07/2025 | Andy Shaughnessy, Design007 MagazineFilbert Arzola is a principal electrical engineer at Raytheon SAS and an instructor who teaches one of the few classes (that I know of) that focuses on setting design constraints. I asked Fil to share his thoughts on design constraints: the factors involved, the various trade-offs, and his best practices for optimizing constraints for your particular design. As Fil says, “Everything about a PCB is a constraint.”
Review: PCEA Orange County Summer Meeting
08/06/2025 | Dan Feinberg, Technology Editor, I-Connect007The Printed Circuit Engineering Association (PCEA) represents a community of engineers, designers, and industry influencers dedicated to the advancement of PCB technology, design, and manufacturing, and the growth and knowledge of its membership. PCEA regularly hosts events to share the latest developments, best practices, and visions for the future of electronic design and manufacturing. The Orange County chapter seems to be one of the largest and most active ones and I was invited to attend the latest chapter event on July 24 in Costa Mesa, California.