STMicroelectronics Details Company-Wide Program to Reshape Manufacturing Footprint and Resize Global Cost Base
April 14, 2025 | STMicroelectronicsEstimated reading time: 4 minutes
STMicroelectronics N.V., a global semiconductor leader serving customers across the spectrum of electronics applications, disclosed further elements of its program to reshape its global manufacturing footprint. This comes as part of the program announced in October 2024 to further strengthen ST’s competitiveness, solidify its position as a global semiconductor leader, and ensure the long-term sustainability of its model as an Integrated Device Manufacturer by leveraging strategic assets globally across technology R&D, design and high-volume manufacturing.
Jean-Marc Chery, President and CEO of STMicroelectronics said: “The reshaping of our manufacturing footprint announced today will future proof our Integrated Device Manufacturer model with strategic assets in Europe and improve our ability to innovate even faster, benefitting all our stakeholders. As we focus on advanced manufacturing infrastructure and mainstream technologies, we will continue to leverage all of our existing sites and bring redefined missions for some of them to support their long-term success. We are committed to managing this program responsibly, according to our long-established values, and exclusively through voluntary measures. The technology R&D, design, and high-volume manufacturing activities in Italy and France will continue to be central to our global operations and will be reinforced via planned investments in mainstream technologies”.
Innovating and scaling up to increase efficiency across manufacturing operations
As innovation cycles shorten, ST’s manufacturing strategy is evolving to accelerate the delivery of innovative, proprietary technologies and products at scale to customers globally, across automotive, industrial, personal electronics and communication infrastructure applications.
The reshaping and modernization of ST’s manufacturing operations aim to achieve two main objectives: prioritizing planned investments towards future-ready infrastructure such as 300mm silicon and 200mm silicon carbide wafer fabs to enable them to reach a critical scale and maximizing the productivity and efficiency of legacy 150mm capabilities and mature 200mm capabilities. In parallel, ST plans to continue to invest in upgrading the technology used across its operations, deploying additional AI and automation for additional efficiency in technology R&D, manufacturing, reliability and qualification processes, with a continued focus on sustainability.
Strengthening ST’s manufacturing ecosystem
Over the next three years, the reshaping of ST’s manufacturing footprint will design and strengthen ST’s complementary ecosystems: in France around digital technologies, in Italy around analog and power technologies and in Singapore on mature technologies. The optimization of these operations aim to achieve full capacity utilization and drive technological differentiation to compete globally. As announced previously, each of ST’s current sites will continue to play a long-term role within the company’s global operations.
Building 300mm silicon megafabs in Agrate and Crolles
The Agrate (Italy) 300mm fab will continue to be scaled up, with the aim to become ST’s flagship high-volume manufacturing facility for smart power and mixed signal technologies. The plan is to double its current capacity to 4,000 wafers per week (wpw) by 2027, with planned modular expansions increasing capacity up to 14,000 wpw, depending on market conditions. As we increase our focus on 300mm manufacturing, the Agrate 200mm fab will refocus on MEMS.
The Crolles (France) 300mm fab will be further cemented as the core of ST’s digital products ecosystem. The plan is to increase capacity to 14,000 wpw by 2027 with planned modular expansions increasing capacity up to 20,000 wpw, depending on market conditions. In addition, we will convert the Crolles 200mm fab to support Electrical Wafer Sorting high volume manufacturing and advanced packaging technologies, hosting activities that do not exist today in Europe. The focus will be on next-generation leading technologies including optical sensing and silicon photonics.
Specialized Manufacturing and Competence Center for Power Electronics in Catania
Catania will continue to serve as a center of excellence for power and wide-bandgap semiconductor devices. The development of the new Silicon Carbide Campus is progressing as planned, with production of 200mm wafers set to begin in Q4 2025, reinforcing ST’s leadership in next-generation power technologies. Our resources supporting Catania’s current 150mm and EWS capabilities will be refocused on 200mm silicon carbide and silicon power semiconductor production, including GaN-on-silicon, reinforcing ST’s leadership in next-generation power technologies.
Optimizing Other Manufacturing Sites
Rousset (France) will remain focused on 200mm manufacturing, with additional volumes reallocated from other sites enabling full saturation of existing manufacturing capacity for optimized efficiency.
Tours (France) will remain focused on its 200mm silicon production line for select technologies, while other activities – including legacy 150mm manufacturing activities – will be transferred to different ST sites, and it will also remain a center of competence for GaN, mainly on epitaxy. The Tours site will also host a new activity: panel-level-packaging, one of the major enablers of chiplets, a technology for complex semiconductor applications that will be key for ST in the future.
Ang Mo Kio (Singapore), ST’s high-volume fab for mature technologies, will remain focused on 200mm silicon manufacturing and will also host our consolidated global legacy 150mm silicon capabilities.
Kirkop (Malta), ST’s high-volume test and packaging fab in Europe will be upgraded, with the addition of advanced automated technologies which will be key to support next-generation products.
Workforce and skills evolution
As ST reshapes its manufacturing footprint over the next three years, the workforce size and required skill sets will evolve. Advanced manufacturing will shift roles from legacy processes involving repetitive manual tasks to a stronger focus on process control, automation, and design. ST will manage this transition through voluntary measures, with a continued commitment to ongoing constructive dialogue and negotiations with employee representatives in accordance with applicable national regulations. Based on current projections, the program is expected to see up to 2,800 people leaving the company globally on a voluntary basis, on top of normal attrition. These changes are expected to occur mainly in 2026 and 2027. Regular updates will be provided to stakeholders as the program progresses.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/09/2025 | Andy Shaughnessy, Design007 MagazineTrade show season is wrapping up as we head into summer. Where has the time gone? I hope you all get the chance to take a vacation this year, because I know you’ve earned one. Speaking of which, when was my last vacay? If I can’t remember, it’s probably time for one. It’s been a busy week in electronics, with fallout from the back-and-forth on tariffs taking up most of the oxygen in the room. We have quite an assortment of articles and columns for you in this installment of Must-Reads. See you next time.
Kaynes Technology Acquires Canada-Based August Electronics
05/09/2025 | PRNewswireAugust Electronics Inc. is pleased to announce that it has entered into a definitive agreement to be acquired by Kaynes Canada Limited, a wholly owned step-down subsidiary of Kaynes Technology India Limited, a leading Electronics System Design & Manufacturing (ESDM) company. The transaction is expected to close by the end of May 2025, subject to customary regulatory approvals and closing conditions.
Localized Automation Becomes a Tariff Storm Safe Haven, but U.S. Smart Factory Build-Out Costs Far Exceed China’s
05/09/2025 | TrendForceTrendForce’s latest “Human-Machine Technology Report” points out that although the 90-day delay on the U.S. reciprocal tariffs announced by the Trump administration in early April 2025 offers temporary relief, it has already triggered lasting shifts in global manufacturing and supply chain strategies.
Primech AI Plans Production of 300 HYTRON Robots through its China Manufacturing Expansion
05/09/2025 | Globe NewswirePrimech AI Pte. Ltd., a subsidiary of Primech Holdings Limited announced a significant expansion of its manufacturing capabilities through a strategic manufacturing partnership in Guangdong Province, China.
Ultrahuman Expands its American Factory’s Manufacturing Capacity
05/09/2025 | GlobeNewswireUltrahuman, a pioneer in health optimization technology, has announced that it’s ramping up its capacity of the Ring AIR. Ultrahuman’s manufacturing facility (UltraFactory) in partnership with SVtronics, a US-based electronics manufacturing business, has been operational in Plano, Texas, since November 2024.