-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
NEXT Semiconductor Technologies Collaborates with BAE Systems to Develop Next Generation Space-Qualified Chips
April 28, 2025 | PRNewswireEstimated reading time: 1 minute

NEXT Semiconductor Technologies is collaborating with BAE Systems to accelerate the insertion of its latest ultra-wideband antenna processor units (APUs) into high-performing radiation-hardened electronic subsystems to support future space missions. NEXT's APUs combine agile signal acquisition and generation with on-board high-reliability, reconfigurable digital processing that offer unprecedented quantity, quality and efficiency of information processing for next generation satellite sensors and transmitters. This effort will enable efficient and resilient wideband RF (radio-frequency) signal processing capabilities not yet available to the space market.
NEXT's latest APU, the NX450, is the world's first 200 GS/s (200 billion samples per second) antenna processor with 100-GHz of instantaneous RF bandwidth split across four independent receive and transmit channels respectively. The NX450 simplifies sensor design by pushing signal digitization and processing closer to the edge – redefining electronic warfare capabilities while reducing sensor SWaP (size, weight, and power). The NX450 is manufactured in an onshore GlobalFoundries 12LP (12 nanometer) FinFET process, features embedded application processor redundancy and has been radiation tested for space qualification.
As satellite networking proliferates, the demand for both greater data payloads and on-orbit processing is driving the advancement of System-on-Chip (SoC) solutions such as APUs that define the capabilities and performance of satellite antenna systems. The NX450 is the first device of its kind to address the emerging demands for secure wide bandwidth satellite communication (SATCOM).
"NEXT is firmly entrenched in the development of high-reliability, software-defined SoC solutions for next generation satellite payloads. We are eager to collaborate with BAE Systems to address future space missions with our unique SoC capabilities," said Mike Kappes, President and Chief Strategy Officer at NEXT Semiconductor.
BAE Systems will provide support of the NX450 APU for use in proliferated low-Earth orbit missions. The company may also work with NEXT to incorporate its own application specific integrated circuit technology and expertise for use in future SoC products. These next-generation, radiation-hardened solutions are the key enabler of wide bandwidth capabilities in demanding space environments.
"By leveraging our decades of space electronics experience, we can apply our radiation-hardened techniques to a commercial off-the-shelf product to deliver a new capability addressing our space customers' needs," said Jim LaRosa, Space Systems program director at BAE Systems. "Our collaboration with NEXT allows for the development of future solutions with dramatically increased mission and environmental performance."
Suggested Items
Elma Electronic Bolsters Quality Management Company-wide with Added AS9100:D and ISO9001:2015 Certifications
06/02/2025 | Elma ElectronicElma Electronic now includes AS9100:D and ISO 9001:2015 certifications at its Horsham, Pa. manufacturing facility, earning the company a multiple site accreditation designation.
Maxar Space Systems Selected to Build High-Power EchoStar XXVI Satellite Share
06/02/2025 | BUSINESS WIREMaxar Space Systems, a trusted partner in satellite design and manufacturing, today announced it has been awarded a contract by EchoStar Corporation to manufacture EchoStar XXVI, a high-power geostationary communications satellite based on the Maxar 1300™ platform.
ispace Completes Success 8 of Mission 2 Milestones
06/02/2025 | ispaceispace, inc. (ispace) (TOKYO: 9348), a global lunar exploration company, announced that the RESILIENCE lunar lander has successfully completed all orbital maneuvers while in lunar orbit and is now being prepared for its landing attempt on June 6, 2025.
Another Lockheed Martin-Built GPS III Satellite Lifts Off into Orbit
06/02/2025 | Lockheed MartinThe eighth GPS III space vehicle—designed and built by Lockheed Martin—successfully launched from Cape Canaveral Space Force Station, Florida. It achieved signal acquisition shortly thereafter.
See TopLine’s Next Gen Braided Solder Column Technology at SPACE TECH EXPO 2025
05/28/2025 | TopLineAerospace and Defense applications in demanding environments have a solution now in TopLine’s Braided Solder Columns, which can withstand the rigors of deep space cold and cryogenic environments.