SEL Receives Purdue Senior Design Partner of the Year Award
May 1, 2025 | Schweitzer Engineering LaboratoriesEstimated reading time: 1 minute
Schweitzer Engineering Laboratories (SEL) has been awarded the Senior Design Partner of the Year Award from the Edwardson School of Industrial Engineering at Purdue University. The award was presented on April 16 during the poster session for the senior capstone project, where students presented their learnings to mentors, peers, and industry sponsors.
During the award portion of the event, the college surprised SEL representatives with the Senior Design Partner of the Year Award for “outstanding support and steadfast partnership in senior projects.”
In the fall of 2024, Purdue University faculty members visited the SEL facility in Lewiston, Idaho, to select projects for the spring semester senior capstone course. They identified four real-world industry challenges for the students to solve for their capstone projects.
This spring, six engineers and technicians from the SEL Manufacturing Division served as industry mentors for more than 24 seniors divided into teams, helping them navigate their semester-long capstone projects. Throughout the semester, students frequently met with their SEL mentors after an initial visit to the Lewiston facility. The mentors provided the student teams with the tools, samples, and data needed to progress in their projects.
SEL is actively involved in supporting the next generation of engineers through higher education. The University Relations team engages with higher education institutions in various ways, including equipment donations, serving on university advisory boards, sponsoring student projects, and offering scholarship opportunities.
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
IPS, SEL Raise the Bar for ENIG Automation in North America
09/11/2025 | Mike Brask, IPSIPS has installed a state-of-the-art automated ENIG plating line at Schweitzer Engineering Laboratories’ PCB facility in Moscow, Idaho. The 81-foot, fully enclosed line sets a new standard for automation, safety, and efficiency in North American PCB manufacturing and represents one of the largest fully enclosed final finish lines in operation.
Machvision Leads Shift to Automated Inline Final Inspection, AOI in North America
09/10/2025 | Ralph Jacobo, all4-PCBSchweitzer Engineering Laboratories (SEL) chose Machvision inspection equipment due to its capabilities and versatility. Machvision of Taiwan offers circuit inspection, hole inspection and measurement, IC Substrate and HDI inspection, and final visual inspection solutions. The best fit for SEL was the 4.0Pro Circuit Inspection for inner and outer layers, and the AFI6 for final visual inspection of finished panels.
Automation Meets Sustainability
09/08/2025 | Rick Nichols, GreenSource EngineeringGreenSource Engineering (GSE) is proud to have contributed to the first successful reshoring of a PCB facility on a greenfield site in the United States. While we are honored to have played a key role, full credit for this achievement goes to SEL for its vision, commitment, and professionalism.
Partnerships Drive Innovation for a Brighter Manufacturing Future
08/26/2025 | Barry Matties, I-Connect007When Schweitzer Engineering Laboratories (SEL) opened its greenfield facility in 2023, it did so with careful attention to choosing its suppliers. In this discussion, Collin Peters, electronics business director for North America at MKS’ Atotech, and Justin Kennedy, manager of engineering at SEL, explore their unique partnership that includes collaborative efforts to develop innovative solutions like the Uniplate® PLBCu6 line.
It’s Only Common Sense: 20 Lessons in 20 Years—A Career in Common Sense
08/25/2025 | Dan Beaulieu -- Column: It's Only Common SenseIt’s been 20 years and 1,000 columns since I published my first monthly edition called “It’s Only Common Sense” on Sept. 5, 2005. I had only written 10 columns when I realized I couldn’t be confined to once a month. I simply had too much to say. So, on July 31, 2006, I started writing once a week, and let me tell you, that’s a lot of Mondays spent thinking, listening, watching, and writing about this wild, brutal, and beautiful industry we call the printed circuit board business.