Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Suggested Items

Avnet Technology Links STMicroelectronics’ STM32 Microcontrollers

04/11/2025 | Avnet
Design engineers who struggle with chip down design will now be able to quickly prototype and deploy their projects based on STM32 series of microcontrollers, specifically the STM32F7 and STM32N6 series.

EDA Tools and the Designer of the Future

01/28/2025 | Andy Shaughnessy, Design007 Magazine
We’re seeing new, young technologists moving into the PCB design and design engineering segment, and it’s just in time; many veteran designers are headed to retirement. At the same time, there have been various recent advances in EDA tools. What will the PCB designer’s job—and the designer’s software tools—look like in the next five years? Bob Potock, vice president of marketing for Zuken USA, weighs in on the PCB designers of tomorrow, and the EDA tools that will take them into an evermore complex future.

Designers Notebook: Implementing HDI and UHDI Circuit Board Technology

10/23/2024 | Vern Solberg -- Column: Designer's Notebook
To accommodate new generations of high I/O semiconductor packaging, circuit board technology has undergone significant changes in both the fabrication process method and the criteria for base material selection. The reason behind these changes is the new high-function semiconductor package families that require more terminals than their predecessors and a significantly narrower terminal pitch.

The Many Complexities of PFAS

03/26/2024 | Marcy LaRont, PCB007 Magazine
In its simplest definition, PFAS is a group of chemicals used to make fluoropolymer coatings and products that resist heat, oil, stains, grease, and water. Fluoropolymer coatings can be in a variety of products. Though this definition is not inaccurate, it can be misleading. Depending on who you ask, there are upward of 10,000 PFAS chemistries that can meet various definitions.

IPC White Paper Emphasizes Critical Importance of Data Analytics for Electronics Manufacturing Process

02/26/2024 | IPC
The increasing complexity of electronics manufacturing requires embracing data analytics to manage electronics factories, according to a new white paper from IPC’s Chief Technologist Council (CTC), "Outlook for Data Analytics in the Electronics Manufacturing Industry."
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in