Marcy’s Musings: Old School vs. New School—When Does It Matter?
It’s Only Common Sense: Stay Curious, My Friends
The Marketing Minute: AI Is Watching Your Marketing Habits
Design engineers know a simple truth that often complicates electronics manufacturing: Light doesn’t go around corners. In densely populated PCBs, adhesives and coatings often fail to fully cure in shadowed regions created by tall ICs, connectors, relays, and tight housings.
When critical bond lines near high-profile components don’t receive sufficient light exposure, even well-designed curing processes can result in incomplete cures. The consequences—rework, inconsistent adhesion, and reduced throughput—are costly, but the production goal is clear: Achieve tack-free cures and high first-pass yields without slowing the assembly line. That’s why recent advances in light-curing have focused on complete shadow-area curing, in-line verification, and reliable post-cure inspection.
Dual-mechanism Curing for Shadowed Regions
One solution is dual-cure chemistry. The initial light-curing step cures exposed regions within seconds, while secondary thermal or chemical mechanisms complete the cure in shadowed areas. For example, multi-cure adhesives polymerize under UV/visible light first, then continue curing with heat or an activator where light cannot penetrate.
For conformal coatings, dual-cure light/moisture systems are especially effective. Light exposure quickly sets the surface, while ambient moisture cures the material that flows beneath or behind components. This approach eliminates the need for added heat cycles, which can stress sensitive devices, while ensuring a complete cure.
In-line Cure Confirmation
Because PCB assembly runs at high speed, real-time cure verification is essential. Dual-cure chemistries resolve shadow-area issues, but manufacturers also need visibility into what has, or hasn’t, cured on the line.
Color-change indicators provide a practical solution. Materials formulated with this technology will shift from one color in the uncured state to another after proper light exposure, allowing for immediate visual confirmation. Dymax adhesives and coatings, for example, feature patented See-Cure color-change technology: The materials dispense as a vivid blue and transition to colorless once fully cured. This instant feedback lets operators—or simple vision systems—verify cure without specialized inspection equipment.
Post-cure Inspection
Verification doesn’t stop at the assembly line. Many light-curable materials include fluorescent tracers for post-cure inspection. Under UV illumination, these tracers reveal the presence and continuity of bond lines and coatings, whether checked manually or with automated optical inspection (AOI).
Dymax Ultra-Red® technology emits bright red fluorescence, providing high contrast against blue-fluorescing substrates such as solder mask, PVC, and PET. After cure, the bond line remains clear in ambient light but turns bright red when exposed to low-intensity UV (\~360–380 nm). Because the Ultra-Red fluorescing component doesn’t draw from the same wavelength band that drives cure, it preserves cure rate and depth. It can also provide a distinctive spectral signature for authentication when needed.
A Streamlined Approach
In board-level assembly, the formula for reliability is straightforward:
- Light curing for speed
- Secondary thermal or moisture curing for shadowed areas
- Visual indicators for in-line and post-cure verification
This integrated approach ensures complete cures, reduces rework, stabilizes cycle time, and improves throughput, providing manufacturers with confidence that every PCB is ready for the next process step.
Doug Katze is the Senior Electronics Business Development Manager for Dymax. To learn more about Dymax, visit them here.
