-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueVoices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
It's Show Time!
In this month’s issue of PCB007 Magazine we reimagine the possibilities featuring stories all about IPC APEX EXPO 2025—covering what to look forward to, and what you don’t want to miss.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
Estimated reading time: 1 minute

Kramer on Counterfeits: DFARS Flow Downs and Trusted Suppliers
On May 6, 2014, the Department of Defense (DoD) issued Defense Federal Acquisition Regulation Supplement: Detection and Avoidance of Counterfeit Electronic Parts (DFARS Case 2012–D055); Final Rule. The purpose of this rule is to clarify the sections of the National Defense Authorization Act (NDAA) for 2012 and 2013, which deal with counterfeit parts. This supplement sought insight from industry that would allow the clarification of several key terms such as “trusted supplier” and “counterfeit part.” Additionally, this supplement addresses both the applicability of these clarifications and the role that existing industry standards play in assessing the trusted status of suppliers.
One of the main components of the DFARS is the clarification of two key definitions: “Counterfeit part” and “trusted supplier.” These two terms are both major components of NDAA Section 818, which among other things, requires the use of trusted suppliers to mitigate the proliferation of counterfeits. There was a very large industry response to requests for comment, which were put forward on these subjects. Ultimately, several key responses were given by the DoD to industry recommendations regarding the definition of “counterfeit part,” as follows:
- Due to concerns regarding the broad nature of the term “counterfeit part,” the term was determined to apply specifically to electronic components.
- An element of intent was added to the term “counterfeit part” by including the term “misrepresented.”
- All terms in the original definition referring to a part’s “substitute” were replaced with the term “unlawful substitute.”
The ultimate effect of these three changes is the fact that in order for a part to be considered counterfeit under DFARS, it must be substituted for a legitimate part with the intent of deceit. This eliminates the possibility that parts might be considered counterfeit as a result of manufacturing defects or improper handling.
The definition of the term “trusted supplier” is likely of even larger importance than what determines a counterfeit component. This is due to the fact that the idea of who is considered a trusted supplier is not only essential to DFARS, but also one of the main concepts put forth by NDAA Section 818: the use of “trusted suppliers” in the defense industry is now required by law. Read the full column here.Editor's Note: This column originally appeared in the July 2014 issue of SMT Magazine.
More Columns from Kramer on Counterfeits
A Summary of Counterfeit Avoidance: Development & ImpactKramer on Counterfeits: Bad Customers
Kramer on Counterfeits: Counterfeit Electronic Parts Avoidance - Profitability or Catastrophe
U.S. Military Tools to Prevent Counterfeit Electronics
Kramer on Counterfeits: Testing Requirements for Components from Unauthorized Sources
Kramer on Components: Independent Distributor - Supply Chain's Best Friend or Worst Enemy?
Kramer on Counterfeits: Protecting Your Supply Chain from Counterfeits & Liability
Kramer on Counterfeits: Investigations, Evidence, and an Unclear Solution