Fresh PCB Concepts: PCB Design Essentials for Electric Vehicle Charging
Elementary, Mr. Watson: Rules of Thumb—Guidelines vs. Principles for PCB Design
Beyond Design: High-speed Rules of Thumb
Broadcom PCB Design: Miniaturization on the Cutting Edge
June 15, 2015 | Andy Shaughnessy, PCBDesign007Estimated reading time: 3 minutes
I recently attended the Orange County Designer's Council “Lunch and Learn” meeting, held at the Broadcom offices on the campus of the University of California, Irvine. Afterward, I sat down with Scott Davis, CID, the senior manager of PC board design at Broadcom, to discuss the company’s savvy PCB design department and their approach to PCB design.
Andy Shaughnessy: Scott, tell us a little about yourself and the design team you manage.
Scott Davis: I've been in the industry since 1996 when I actually joined a historic company, Praegitzer Industries. It was part of the Praegitzer design group that started the numerous acquisitions and transfers throughout the history of Tyco, the e2E Corporation, and the acquisition of Plexus Corporation. I moved with them from Oregon to Colorado, and then in 2007 I was informed about the position here at Broadcom. I have been here almost eight years. I'm managing a team of about 40. These people are designers, along with a CAD library team and our two resources that run Valor full time. This is a global team. We have 11 people in Singapore, one person in Canada, one person in India, and the rest of the remaining folks here in America, mainly in California.
Shaughnessy: Is that 40 PCB designers?
Davis: It's managers, designers, librarians, and Valor operators, a combination of all of the above.
Shaughnessy: So, you all rely on Valor?
Davis: We love Valor and the fabricators love the Broadcom packages for fabrication because they don't spend any time in engineering. They go right to the floor for production and we run every single design through Valor. The reason for that is we have two CAD tools. We're using the Mentor Graphics tools and we're using the Cadence tools, but we want our output packages to be consistent, including PDFs, Gerbers, .tgz files, pick-and-place files, etc. We find that Valor provides that third-party platform in order for us to quickly and automatically create those deliverables which we then load into our ERP systems for release to the suppliers.
Shaughnessy: What kind of design challenges are your teams facing?
Davis: Certainly the challenge we have as a world leader in semiconductors is the breadth of technology that we see. We see everything from two layer boards to 24-layer boards. We have a group here doing ATE boards. We're doing simple Bluetooth boards, WiFi boards, high-speed networking boards. So I think that the challenge we have is that, in a large design group, it's good for the designers to get that variety, and that keeps their skill sets really sharp on a variety of technologies. We're not doing power supply after power supply after power supply. You may work on a WiFi board one week and you may work on a cable set-top box or a cable modem the next week. That's one of the dynamic aspects of my group: the variety of technology that Broadcom brings to the table. It’s unique to the industry.
Shaughnessy: We surveyed our readers last month, and some of the designers said that it's getting to be less fun because there's so little real estate and they're just running out of space on the board. Is that a real problem for you too?
Davis: Yes, it's a real problem with the miniaturization of the WiFi circuits and the RF circuits. Certainly cellular telephones and any kind of 4G LTE and the new technologies that are coming up are just getting smaller and smaller. We are seeing 0.35 mm packages, 0.2 mm packages, so you're forced into these HDI, almost completely three-dimensional models that become very difficult to even realize or get a picture of when you first load your schematics and associate it to your board layout. It's very challenging.
Shaughnessy: How small of a via can you design?
Davis: Of course we can design almost anything. The fabricators are typically limiting us in some cases to 4 mil mechanicals, certainly 6 mil is a real break point. But 8 mil mechanicals are not a problem. You can go pretty thick on that. Microvias, we're trying to push down to 4 mils with 8 mil pads. That's pretty tight, but we stay pretty much industry standard as far as Class 2 for our designs. High reliability for most consumer electronics is not that large of an issue. You're certainly not Class 3. Most of our material is still 370HR, except for our high-speed stuff. We are doing some exotic materials and pushing the envelope in the SerDes serial stream gigabits per second.
Shaughnessy: It sounds like you have a really fun job.
Davis: It's a great job. I love being a part of industry opportunities. I want to thank you and appreciate the time to talk to me today.
Shaughnessy: Thank you. It’s been a pleasure.
Share on:
Suggested Items
Fresh PCB Concepts: PCB Design Essentials for Electric Vehicle Charging
11/27/2024 | Team NCAB -- Column: Fresh PCB ConceptsElectric vehicles (EVs), powered by electricity rather than fossil fuels, are transforming transportation and reducing environmental impacts. But what good is an EV if it can't be easily charged? In this month's column, Ramon Roche dives into the role of printed circuit boards (PCBs) in electric vehicle charging (EVC)—and the design considerations.
From Construction Work to PCB Design in Under a Year
11/27/2024 | Andy Shaughnessy, Design007 MagazineAt the Anaheim Electronics & Manufacturing Show in October, I had the opportunity to talk with some new PCB designers, including Jon Smith of Frontgrade Aethercomm. During the Anaheim show, John Watson, a PCB design instructor at Palomar College, led a panel of his past and present students, including Jon, who shared his story of switching from a construction career to PCB design in a matter of months, courtesy of Watson’s Palomar College design curriculum.
PCB Layout Rules of Thumb for Consideration
11/25/2024 | Patrick Davis, Cadence Design SystemsJust because a “rule of thumb” is usually based on experience instead of precise facts doesn’t negate its value. For instance, when I told my kids that a good rule of thumb was not to back-talk to their mother, they discovered very quickly how accurate my advice was once they crossed that line. There are a lot of rules of thumb that we rely on daily, including those that apply to PCB design.
HPC Customer Engages Sondrel for High End Chip Design
11/25/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips, has announced that it has started front end, RTL design and verification work on a high-performance computing (HPC) chip project for a major new customer.
Rules of Thumb for PCB Layout
11/21/2024 | Andy Shaughnessy, I-Connect007The dictionary defines a “rule of thumb” as “a broadly accurate guide or principle, based on experience or practice rather than theory.” Rules of thumb are often the foundation of a PCB designer’s thought process when tackling a layout. Ultimately, a product spec or design guideline will provide the detailed design guidance, but rules of thumb can help to provide the general guidance that will help to streamline the layout process and avoid design or manufacturing issues.