-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueTechnical Resources
Key industry organizations–all with knowledge sharing as a part of their mission–share their technical repositories in this issue of SMT007 Magazine. Where can you find information critical to your work? Odds are, right here.
The Path Ahead
What are you paying the most attention to as we enter 2025? Find out what we learned when we asked that question. Join us as we explore five main themes in the new year.
Soldering Technologies
Soldering is the heartbeat of assembly, and new developments are taking place to match the rest of the innovation in electronics. There are tried-and-true technologies for soldering. But new challenges in packaging, materials, and sustainability may be putting this key step in flux.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - smt007 Magazine
A Look at the High-Reliability Interconnect Market
July 15, 2015 | Barry Matties, I-Connect007Estimated reading time: 4 minutes

I-Connect007 Publisher Barry Matties recently met with Mark Cormier of Miraco Inc. to discuss the latest trends and drivers in the high-reliability segment, and their customers' increasing demand for quality.
Barry Matties: Mark, let’s start with an overview of Miraco.
Mark Cormier: We design interconnects and source interconnects. Most of our business is created from the need for a custom interconnect. The vast majority of our opportunities (~85%) are in the medical and military fields that require Class 3 high-reliability solutions. Our commercial business is only 15% of our total business.
The military designs we do are mostly avionics. We've had history in the past with doing a lot of ordinance, but right now that's not our big driver. Our ITAR registration has helped improve our visibility to more military designs.
Our medical designs are predominately medical device types of products. We seem to do very well in that area. It is long lead time, long design cycle.
Matties: What sorts of needs do your customers currently have?
Cormier: Typically they need an interconnect and they are short of time, short of manpower, or short of material knowledge. Miraco’s advantage is we're unbiased in the approach. We don't care if the design requires a flexible printed circuit, a flat flex cable or a wire harness. We can design and source any of the three options and have the capability of building the complete solution at either our North American facilities located in Manchester, New Hampshire or in Tijuana, Mexico. When volumes dictate, and with customer approval, we also have the option of building a full turnkey solution at our off-shore partner’s facilities. In summary, our customers benefit from our local design capability, our global sourcing network, and our multiple assembly options while keeping the quality assurance group in Manchester, New Hampshire.
Matties: When we look at medical electronics, that's a fast-moving market with a lot of changes being made.
Cormier: Yes, it is fast moving, and it slows down because the design cycles are so long from when you do prototyping to actually getting it into production. We just delivered a prototype that got a first-time order for something that we've been working on for eight years. We understand the material traceability requirements that our medical customers operate under.
Matties: When you say design, are you talking about from concept?Page 1 of 2
Suggested Items
ASM Technologies Signs MoU with the Government of Karnataka
02/14/2025 | ASM TechnologiesAs part of the agreement ASM Technologies will acquire 10 acres of land from the Karnataka Industrial Areas Development Board (KIADB) to set up a state-of-the-art design facility.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
02/14/2025 | Andy Shaughnessy, Design007 MagazineShow season is upon us. Recently, Marcy LaRont and I attended DesignCon’s 30th anniversary show, and the expo floor was packed for almost the entire time. Show managers went all out, hosting a welcome party that included a rocking DJ. Much of the event revolved around AI and how to implement it. Is your company utilizing AI now? I’m featuring an abundance of articles from the past week, covering everything from DesignCon presentations to the benefits of volunteering for an IPC committee. If you’ve ever thought about joining a relevant committee, IPC is always looking for “new blood.”
PCB Designers of the Future—and Their Software Tools
02/14/2025 | Andy Shaughnessy, Design007 MagazineThe PCB designers of tomorrow have their work cut out for them. They’ll be dealing with the continuing drive for “faster, smaller, cheaper,” while electronics become more complex. But EDA companies have improved their software tools’ capabilities over the past few years, incorporating functionalities such as AI and increasing productivity. I asked David Wiens, product marketing manager at Siemens, to share his thoughts on the continuing evolution of PCB design and PCB designers, and how EDA software companies can help designers meet the technological requirements of tomorrow.
Here’s Looking at You, Kid
02/13/2025 | IPC Community Editorial TeamOur industry is facing a two-fold challenge: finding the next generation of PCB designers and training these young technologists. Most high school career counselors don't know anything about this career, and electrical engineering grads leave college with little or no PCB design knowledge. Where do we start? We asked two PCB design instructors, IPC’s Kris Moyer and Palomar College’s John Watson, to weigh in on the best methods for finding and training the designers of tomorrow.
Pieces of a Puzzle: PCB Designer John Watson Sees the Big Picture of Life and Work
02/13/2025 | Michelle Te, IPC CommunityJohn Watson started his career in military intelligence and as an electronics repair technician but moved over to printed circuit board design at a time when the whole electronics industry was experiencing a paradigm shift.