Dan’s Biz Bookshelf: ‘In Defense of a Liberal Education’
American Made Advocacy: A Growing Presence in Washington in Turbulent Times
A Well-Designed Laminate Supply Chain has to Own It!
July 22, 2015 | Mark Goodwin, VentecEstimated reading time: 1 minute
Designing a supply chain for the provision of laminates and pre-pregs to the PCB fabricator shouldn’t be that complicated, should it? The laminate is simply manufactured and then shipped...what could possibly go wrong? It turns out it is more complicated, partly because the supply chain is not fully owned by one supplier, and hence cannot be fully customized to the needs of each customer.
There are a number of things that make that supply chain complex beyond the fact that there are multiple parties involved, from the laminator to the distributor or sales agent to the logistics provider.
Forecasting, as we all know, is not an exact science, especially in Western Europe and North America, where lower volumes, high mix and quick-turn are the demand drivers. The PCB industry is so unpredictable in its demand that most fabricators won’t offer their laminate supplier a forecast at all. This may not be a problem for the regularly used, standard materials that are most likely available locally and at short notice, or are perhaps even part of a consignment stock agreement. But what about those unusual requests, which seem to always be accompanied by a request for fast turnaround? These might not be available in your geography, and that delay in receiving material can be the difference between winning or losing an order, or even retaining or losing a customer.
Increasingly, the supply chain seems to want to shift any commercial risk involved in stocking goods onto the customer who isn’t refusing to forecast because they don’t want to, but simply because they can’t.
So demand is unpredictable, but there’s more to it than that. What about customization of materials, such as unbalanced copper or an unusual build structure? This is out of the question for typical laminate supply chains with third-party distribution, where the local vendor has to share your needs with his supplier or suppliers and find a solution that then has to be produced and shipped. All of that takes time—too much time.
Read the full article here.
Editor's Note: This article originally appeared in the July 2015 issue f The PCB Magazine.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Statement from the Global Electronics Association on the July 2025 Tariff on Copper Foil and Electronics-Grade Copper Inputs
07/31/2025 | Global Electronics AssociationWe are disappointed by today’s decision to impose a 50% tariff on imported copper foil and other essential materials critical to electronics manufacturing in the United States.
Considering the Future of Impending Copper Tariffs
07/30/2025 | I-Connect007 Editorial TeamThe Global Electronics Association is alerting industry members that a potential 50% tariff on copper could hit U.S. electronics manufacturers where it hurts.
Connect the Dots: Sequential Lamination in HDI PCB Manufacturing
07/31/2025 | Matt Stevenson -- Column: Connect the DotsAs HDI technology becomes mainstream in high-speed and miniaturized electronics, understanding the PCB manufacturing process can help PCB design engineers create successful, cost-effective designs using advanced technologies. Designs that incorporate blind and buried vias, boards with space constraints, sensitive signal integrity requirements, or internal heat dissipation concerns are often candidates for HDI technology and usually require sequential lamination to satisfy the requirements.
OKI Launches Rigid-Flex PCBs with Embedded Copper Coins Featuring Improved Heat Dissipation for Space Equipment Applications
07/29/2025 | BUSINESS WIREOKI Circuit Technology, the OKI Group’s printed circuit board (PCB) business company, has developed rigid-flex PCBs with embedded copper coins that offer improved heat dissipation for use in rockets and satellite-mounted equipment operating in vacuum environments.
Designers Notebook: Basic PCB Planning Criteria—Establishing Design Constraints
07/22/2025 | Vern Solberg -- Column: Designer's NotebookPrinted circuit board development flows more smoothly when all critical issues are predefined and understood from the start. As a basic planning strategy, the designer must first consider the product performance criteria, then determine the specific industry standards or specifications that the product must meet. Planning also includes a review of all significant issues that may affect the product’s manufacture, performance, reliability, overall quality, and safety.