LLNL Researcher Takes Aim at Solar-Cell Reliability
September 18, 2015 | Lawrence Livermore National LaboratoryEstimated reading time: 1 minute
A Lawrence Livermore National Lab engineer has been awarded $570,000 through the Department of Energy SunShot Initiative to explore spectroscopic technology as a means of detecting moisture buildup in solar photovoltaic (PV) cells.
Over the next two years, Mihail Bora, a Materials Engineering Division (MED) research team member at the Lab, will try to prove that spectral imaging can be used to evaluate the moisture content of PV modules and to create two-dimensional maps and models of water concentration. Bora will then use these results as a screening tool to help protect the modules from water damage. Water ingress can cause corrosion of metal parts, delamination and decrease the efficiency of solar cells.
“Our goal is to measure water content without destroying the photovoltaic modules and to remove uncertainty on how reliable the modules are over their long expected lifetimes,” Bora said. “Reliability plays a tremendously important role in making solar competitive with other non-renewable energy sources, because it allows project managers to more efficiently use its funds and may lead to a decrease in financing costs.”
Bora’s project builds on the team’s previous testing with laminates and aims to answer questions critical to industry adoption, such as detection range, limits, accuracy and stability. The typical approach to addressing the problem, Bora said, is focused on water transport measurements in polymer membranes or controlled laboratory setups.
This project, Bora said, combines optics and reliability, two areas of core importance to Lawrence Livermore’s mission.
Suggested Items
I-Connect007’s Editor’s Choice: Five Must-Reads for the Week
07/04/2025 | Marcy LaRont, I-Connect007For our industry, we have seen several bullish market announcements over the past few weeks, including one this week by IDC on the massive growth in the global server market. We’re also closely watching global trade and nearshoring. One good example of successful nearshoring is Rehm Thermal Systems, which celebrates its 10th anniversary in Mexico and the official opening of its new building in Guadalajara.
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
United Electronics Corporation Advances Manufacturing Capabilities with Schmoll MDI-ST Imaging Equipment
06/24/2025 | United Electronics CorporationUnited Electronics Corporation has successfully installed the advanced Schmoll MDI-ST (XL) imaging equipment at their advanced printed circuit board facility. This significant technology investment represents a continued commitment to delivering superior products and maintaining their position as an industry leader in precision PCB manufacturing.
Orbel Corporation Integrates Schmoll Direct Imaging
06/04/2025 | Schmoll AmericaOrbel Corporation in Easton, PA, proudly becomes the first PCM facility in the U.S. equipped with Schmoll’s MDI Direct Imaging system. This installation empowers Orbel to support customers with greater precision and quality.
Key Insights on Photoresist for Defect Reduction
05/21/2025 | I-Connect007 Editorial TeamIn PCB manufacturing, understanding the intricacies of the photoresist process is crucial for achieving high-quality results. Industry experts Josh Krick, a technical service engineer at IEC, and Tim Blair, a PCB imaging specialist at Tim Blair LLC, share their knowledge on the essential stages of photoresist application, highlight critical advancements in materials, and discuss common defects encountered during production. They share best practices and innovative solutions to enhance the manufacturing process, reduce defects, and ensure efficiency and reliability in high-tech applications.