Crucial Hurdle Overcome in Quantum Computing
October 5, 2015 | University of New South WalesEstimated reading time: 3 minutes
The significant advance, by a team at the University of New South Wales (UNSW) in Sydney appears today in the international journal Nature.
"What we have is a game changer," said team leader Andrew Dzurak, Scientia Professor and Director of the Australian National Fabrication Facility at UNSW.
"We've demonstrated a two-qubit logic gate - the central building block of a quantum computer - and, significantly, done it in silicon. Because we use essentially the same device technology as existing computer chips, we believe it will be much easier to manufacture a full-scale processor chip than for any of the leading designs, which rely on more exotic technologies.
"This makes the building of a quantum computer much more feasible, since it is based on the same manufacturing technology as today's computer industry," he added.
The advance represents the final physical component needed to realise the promise of super-powerful silicon quantum computers, which harness the science of the very small - the strange behaviour of subatomic particles - to solve computing challenges that are beyond the reach of even today's fastest supercomputers.
In classical computers, data is rendered as binary bits, which are always in one of two states: 0 or 1. However, a quantum bit (or 'qubit') can exist in both of these states at once, a condition known as a superposition. A qubit operation exploits this quantum weirdness by allowing many computations to be performed in parallel (a two-qubit system performs the operation on 4 values, a three-qubit system on 8, and so on).
"If quantum computers are to become a reality, the ability to conduct one- and two-qubit calculations are essential," said Dzurak, who jointly led the team in 2012 who demonstrated the first ever silicon qubit, also reported in Nature.
Until now, it had not been possible to make two quantum bits 'talk' to each other - and thereby create a logic gate - using silicon. But the UNSW team - working with Professor Kohei M. Itoh of Japan's Keio University - has done just that for the first time.
The result means that all of the physical building blocks for a silicon-based quantum computer have now been successfully constructed, allowing engineers to finally begin the task of designing and building a functioning quantum computer.
A key advantage of the UNSW approach is that they have reconfigured the 'transistors' that are used to define the bits in existing silicon chips, and turned them into qubits. "The silicon chip in your smartphone or tablet already has around one billion transistors on it, with each transistor less than 100 billionths of a metre in size," said Dr Menno Veldhorst, a UNSW Research Fellow and the lead author of the Nature paper.
"We've morphed those silicon transistors into quantum bits by ensuring that each has only one electron associated with it. We then store the binary code of 0 or 1 on the 'spin' of the electron, which is associated with the electron's tiny magnetic field," he added.
Dzurak noted that that the team had recently "patented a design for a full-scale quantum computer chip that would allow for millions of our qubits, all doing the types of calculations that we've just experimentally demonstrated."
He said that a key next step for the project is to identify the right industry partners to work with to manufacture the full-scale quantum processor chip.
Such a full-scale quantum processor would have major applications in the finance, security and healthcare sectors, allowing the identification and development of new medicines by greatly accelerating the computer-aided design of pharmaceutical compounds (and minimizing lengthy trial and error testing); the development of new, lighter and stronger materials spanning consumer electronics to aircraft; and faster information searching through large databases.
Suggested Items
Rules of Thumb: Design007 Magazine, November 2024
11/11/2024 | I-Connect007 Editorial TeamRules of thumb are everywhere, but there may be hundreds of rules of thumb for PCB design. They’re built on design formulas, fabricators’ limitations, and tribal knowledge. And unfortunately, some longtime rules of thumb should be avoided at all costs. How do we separate the wheat from the chaff, so to speak?
Connect the Dots: Best Practices for Prototyping
09/21/2023 | Matt Stevenson -- Column: Connect the DotsPCB prototyping is a critical juncture during an electronic device’s journey from concept to reality. Regardless of a project’s complexity, the process of transforming a design into a working board is often enlightening in terms of how a design can be improved before a PCB is ready for full production.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Asia/Pacific AI Spending Surge to Reach a Projected $78 Billion by 2027
09/19/2023 | IDCAsia/Pacific spending on Artificial Intelligence (AI) ), including software, services, and hardware for AI-centric systems will grow to $78.4 billion in 2027, according to International Data Corporation's latest Worldwide Artificial Intelligence Spending Guide.
Intel to Sell Minority Stake in IMS Nanofabrication Business to TSMC
09/13/2023 | IntelIntel Corporation announced that it has agreed to sell an approximately 10% stake in the IMS Nanofabrication business to TSMC. TSMC’s investment values IMS at approximately $4.3 billion, consistent with the valuation of the recent stake sale to Bain Capital Special Situations.