Dan’s Biz Bookshelf: ‘Believe in Better'
The Big Picture: Our Big ‘Why’ in the Age of AI
The Chemical Connection: Through-glass Vias in Glass Substrates
All About Flex: Plated Through-holes in Flexible Circuits
October 29, 2015 | Dave Becker, All FlexEstimated reading time: 4 minutes
Inspection
Plated through-holes can be tested/inspected in a number of ways.
- Conductivity: There are special electrical measurement devices that will precisely characterize the electrical conductivity of the through-hole. Any anomaly such as a plating void will change the electrical conductivity and be detected by the tester. This is a non-destructive test which is outlined in IPC-TM-650.
- Micro cross-sections: Cross-sections are created by encasing the through-hole in a hard epoxy and creating thin slices to inspect the through-hole sidewalls under high magnification. Micro cross-section requirements are specified in MIL-PRF-31032/1 and IPC-6013.
- Visual Inspection: Through-holes can also be inspected by using special magnification with reflected lighting. This inspection is considered a “quick” method for spotting problems and can supplement more formal inspection methods.
Good process control techniques may require a combination of several different inspection methods. The most critical aspect is controlling the inputs such as chemistries. Some applications, markets and/or customers may have exact specifications on through-hole test methods, minimum thicknesses, and may require cross-section data and/or images to accompany individual manufacturing lots.
Dave Becker is vice president of sales and marketing at All Flex Flexible Circuits LLC.
Page 4 of 4Share on:
Suggested Items
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.
Copyright © 2025 I-Connect007 / Global Electronics Association Publishing Group All rights reserved.
Log in