Dan’s Biz Bookshelf: Four Important Books You Need to Read (Not Just Say You Have)
The Marketing Minute: Cracking the Code of Technical Marketing
NREL Estimates Economically Viable US Renewable Generation
December 9, 2015 | DOE/National Renewable Energy LaboratoryEstimated reading time: 2 minutes
Analysts at the Energy Department's National Renewable Energy Laboratory (NREL) are providing, for the first time, a method for measuring the economic potential of renewable energy across the United States.
A study applying this new method found that renewable energy generation is economically viable in many parts of the United States largely due to rapidly declining technology costs.
The report, Estimating Renewable Energy Economic Potential in the United States: Methodology and Initial Results, describes a geospatial analysis method used to estimate the economic potential of several renewable resources. Economic potential is a metric that quantifies the amount of economically viable renewable generation that is available at a specific location. Analysis to date includes photovoltaics (PV), wind, geothermal, biomass and hydropower resources.
"This report presents one method for estimating economic potential," NREL Energy Analyst Philipp Beiter said. "The initial results are intended to explore this method as a screening metric for understanding the economic viability of renewable generation at a detailed geospatial resolution."
Looking at the potential at developable sites, the report found that when the social cost of carbon is taken into account, renewable generation is economically viable in many parts of the country. At 2014 costs, the technologies combine for 820 terawatt-hours of estimated economic potential beyond the generation from renewable energy facilities already in operation. This additional potential is equivalent to nearly 20 percent of total U.S. annual electricity generation from all sources in 2014.
"Declining renewable technology costs are a significant driver for these results," Beiter said. "Economic potential has more than tripled as a result of cost reductions already realized for renewable generation technologies between 2010 and 2014, particularly for wind and solar PV."
Page 1 of 2
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
08/15/2025 | Marcy LaRont, I-Connect007In our industry, my top reads include Prashant Patel’s overview and argument for reshoring, which I found to be a great general overview and breakdown. In further support of the onshoring/reshoring message, I’m highlighting Nolan Johnson’s interview on the survey and report by the Reshoring Initiative. Check out my interview with USPAE’s Jim Will on the state of the flat panel display (FPD) industry and the risks associated with it for U.S. defense and critical infrastructure products.
Global Electronics Industry Remains Under Pressure from Rising Costs
08/04/2025 | Global Electronics AssociationThe global electronics manufacturing supply chain remains under pressure from rising costs, with 61% of firms reporting higher material costs and 54% noting increased labor expenses. according to the Global Electronics Association’s Sentiment of the Global Electronics Manufacturing Supply Chain Report.
Statement from the Global Electronics Association on the July 2025 Tariff on Copper Foil and Electronics-Grade Copper Inputs
07/31/2025 | Global Electronics AssociationWe are disappointed by today’s decision to impose a 50% tariff on imported copper foil and other essential materials critical to electronics manufacturing in the United States.
Direct Metallization: A Sustainable Shift in PCB Fabrication
07/31/2025 | Jim Watkowski, Harry Yang, and Mark Edwards, MacDermid Alpha Electronics SolutionsThe global electronics industry is undergoing a significant transformation, driven by the need for more resilient supply chains and environmentally sustainable manufacturing practices. Printed circuit boards (PCBs), the backbone of interconnection for electronic devices, are at the center of this shift. Traditionally, PCB fabrication has relied heavily on electroless copper, a process that, while effective, is resource-intensive and environmentally hazardous. In response, many manufacturers are turning to direct metallization technologies as a cleaner, more efficient alternative.
Considering the Future of Impending Copper Tariffs
07/30/2025 | I-Connect007 Editorial TeamThe Global Electronics Association is alerting industry members that a potential 50% tariff on copper could hit U.S. electronics manufacturers where it hurts.