American Made Advocacy: A Growing Presence in Washington in Turbulent Times
It’s Only Common Sense: How to Win Back Lost Customers
Punching Out: M&A North American PCB and EMS Deals for the First Half of 2025
Dave Bergman: IPC’s Technology & International Reach
December 30, 2015 | Patty Goldman, I-Connect007Estimated reading time: 1 minute
I met with the IPC’s VP of Standards and Technology, Dave Bergman, while in Chicago recently. I’ve known Dave for almost 30 years, so we had quite a chat, covering a lot of ground, from the efforts of IPC China and IPC India, to the standards activities that are certainly the core activity of IPC.
Patty Goldman: Dave, it is good to see you as always. How about we start with telling me a little bit about your job and what you are responsible for. I know everything morphs a little bit, as time goes by.
Dave Bergman: I am currently vice president of standards and training at IPC. As part of my activities, I retain some international responsibilities, including leading IPC’s India office, and European representatives in Sweden and Russia. I oversee all of our standardization efforts, our certification and training efforts, as well as validation services QML certification, the new SGA standards gap analysis program and multimedia training DVDs and online videos being developed for shop floor operators and technicians.
Goldman: Tell me more about your international responsibilities.
Bergman: From the international standpoint, I am responsible for the relationship between IPC and other global associations, many of which are in the World Electronics Circuits Council (WECC). These associations have a significant focus on the PCB industry in their regions and while this is still an important part of IPC activities, it is only a piece of the market we serve. WECC relations still help IPC in the area of market research, standards and government relations. I was formerly responsible for the China office. I got involved in IPC China when we started the office in 2002. I took over the management in 2007. IPC China activities grew enough to the point where IPC’s board said they wanted to have a full-time president responsible for China. When we hired a full-time president in 2012, I transitioned into other areas of responsibility and turned over the reins to Phil Carmichael.
Editor's Note: This article originally appeared in the December 2015 issue of The PCB Magazine.
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Powering Progress: Summer 2025 Community Magazine Now Available
07/22/2025 | Community MagazineIn the new Summer 2025 edition of Community Magazine, members of the Global Electronics Association demonstrate what progress really looks like—through innovation on the factory floor, influence on public policy, and investment in the next generation of engineers.
TRI to Exhibit at SMTA Queretaro Expo 2025
07/16/2025 | TRITest Research, Inc. (TRI), the leading provider of test and inspection systems for the electronics manufacturing industry, is pleased to announce plans to exhibit at the SMTA Querétaro Expo 2025, scheduled to take place on July 24, 2025, at the Querétaro Centro de Congresos y Teatro Metropolitano.
Global PCB Connections: Let the Spec Fit the Board, Not Just the Brand
07/17/2025 | Jerome Larez -- Column: Global PCB ConnectionsIf you’ve ever seen an excellent PCB quote delayed, or worse, go cold because of a single line on the fab print, you’re not alone. Often, that line reads something like, “Use 370HR only,” or “IT-180A required.” These and other brand-name materials are proven performers, but unless your design needs that specific resin system (say, for RF performance, thermal reliability, or stringent CAF resistance), you may inadvertently be holding your job hostage.
IPC Hall of Fame Spotlight Series: Highlighting Lionel Fullwood
07/15/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. This special series on IPC Hall of Fame members provides a reminder of who was honored and why. As a bonus, for those who are still around, we get to find out what these talented individuals are up to today.
TRI Unveils New Platform for Diverse Board Sizes
07/14/2025 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, proudly introduces a new size configuration for SPI and AOI Models.