Dan’s Biz Bookshelf: ‘Do/Start'
Facing the Future: The Role of 5G and Beyond in Shaping PCB Demand
It’s Only Common Sense: Stop Pitching, Start Listening
Rogers Offers Practical Insights into Testing and Using Advanced Circuit Materials at DesignCon 2016
January 6, 2016 | Rogers CorporationEstimated reading time: 3 minutes
Rogers Corporation will be exhibiting and educating at the upcoming DesignCon. Now in its 21st year, DesignCon is a premiere event for design chip-circuit-and system-level engineers working on high-frequency analog and high-speed digital circuits. DesignCon 2016 is scheduled for January 19-21, 2016 (January 20-21 for the exhibition) at the Santa Clara Convention Center (Santa Clara, California).
On the conference side, John Coonrod, Technical Marketing Manager for Rogers Advanced Connectivity Solutions, and author of the popular ROG Blog series, will participate in a 75-minute panel discussion targeting effective measurement methods for high-frequency/high-speed printed-circuit-board (PCB) materials.
This technical presentation will focus, in particular, on frequencies above 10 GHz, as needed for a growing number of applications, including many emerging wireless communications systems. Conducted by the IPC D-24c task group (www.ipc.org) on High Frequency Test Methods, the round-robin-style panel discussion (“Track 05: Characterize PCB Materials and Processing”) will explore the properties of some of the latest circuit materials and examine different methods for testing and characterizing those materials. Joining John Coonrod in the discussion will be Glenn Oliver, Senior Engineer at DuPont, and Don DeGroot, President of CCN.
Also, Dr. Allen F. Horn III will be presenting “Effect of conductor profile structure on propagation in transmission lines” at 9:20 AM on Thursday, January 21 and participating as a member of the August panel discussion “Getting smooth copper and keeping it” at 3:45 PM on Thursday, January 21.
As part of the DesignCon Expo Hall, representatives from Rogers Corp. (www.rogerscorp.com) will be exhibiting at Booth #702, with information and insight on the use of their circuit materials, including ULTRALAM® 3850HT, CLTE-XT™, and RO3003™ laminates. Rogers will also be previewing their new material system developed for ultra low loss digital applications.
ULTRALAM 3850HT high-temperature (HT) liquid-crystal-polymer (LCP) circuit material delivers high yields in multilayer circuits. Its high melt temperature of +330°C improves multilayer layer-to-layer registration and offers improved thermal stability, while its low effective dielectric constant (3.14 @10GHz), low loss (0.002), and thin core offerings make it an ideal circuit material for millimeter frequencies, including 77 GHz used in long range automotive collision-avoidance radar systems. Being highly impermeable, it is an attractive alternative to ceramic for MMIC (monolithic microwave integrated circuit) packaging.
Page 1 of 2
Share on:
Suggested Items
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.
Trouble in Your Tank: Causes of Plating Voids, Pre-electroless Copper
05/09/2025 | Michael Carano -- Column: Trouble in Your TankIn the business of printed circuit fabrication, yield-reducing and costly defects can easily catch even the most seasoned engineers and production personnel off guard. In this month’s column, I’ll investigate copper plating voids with their genesis in the pre-plating process steps.
Elephantech: For a Greener Tomorrow
04/16/2025 | Marcy LaRont, PCB007 MagazineNobuhiko Okamoto is the global sales and marketing manager for Elephantech Inc., a Japanese startup with a vision to make electronics more sustainable. The company is developing a metal inkjet technology that can print directly on the substrate and then give it a copper thickness by plating. In this interview, he discusses this novel technology's environmental advantages, as well as its potential benefits for the PCB manufacturing and semiconductor packaging segments.
Trouble in Your Tank: Organic Addition Agents in Electrolytic Copper Plating
04/15/2025 | Michael Carano -- Column: Trouble in Your TankThere are numerous factors at play in the science of electroplating or, as most often called, electrolytic plating. One critical element is the use of organic addition agents and their role in copper plating. The function and use of these chemical compounds will be explored in more detail.
IDTechEx Highlights Recyclable Materials for PCBs
04/10/2025 | IDTechExConventional printed circuit board (PCB) manufacturing is wasteful, harmful to the environment and energy intensive. This can be mitigated by the implementation of new recyclable materials and technologies, which have the potential to revolutionize electronics manufacturing.