Elementary, Mr. Watson: Rules of Thumb—Guidelines vs. Principles for PCB Design
Beyond Design: High-speed Rules of Thumb
Global PCB Connections: A Technical Overview of Long-flex Printed Circuit Boards
IPC Designers Council Viewpoint: Gary Ferrari
January 25, 2016 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
When we started putting together our coverage of the Designers Council, we knew we’d have to get the real scoop from Gary Ferrari. He’s been helping to raise the status of the PCB designer for decades. As co-founder and longtime executive director of the Designers Council, as well as an IPC Master Instructor, Gary has dedicated a big part of his career to PCB design. After decades of service, he was inducted into the IPC Hall of Fame at IPC APEX EXPO this year.
I caught up with Gary and asked him to fill us in on the creation of the Designers Council, and some of the changes he’s seen in the organization in the last 24 years.
Andy Shaughnessy: You’re often referred to as the “Founder of the Designers Council.” How did you get involved and who else helped get the DC started?
Gary Ferrari: As you know, Dieter Bergman and I worked together on many of the standards that affect designers. We also did several designer-oriented workshops. One day, Dieter asked me what more IPC could do for the design community. My answer was very simple: “Mechanical engineers have the ASME, electrical engineers have IEEE, and the designers have sore eyes from staring at their monitors. What we need is a society for board designers, and anyone with a vested interest in board design.”
In 1991, we hit the road and traveled throughout the U.S. to introduce a new design standard. It also gave us an opportunity to poll the attendees to hear their comments on whether an IPC Designers Council was a good idea. We also asked them what they felt its charter should be. The primary feedback was designer education, a forum to discuss common interests, and network building. In summary, they liked the idea of a designer society.
However, an issue was IPC’s membership structure. Their membership is company-based, whereas a society is generally individual-based, similar to SMTA. After consulting with IPC’s legal counsel, we were able to structure the Designers Council as a chapter-based entity, thus allowing for individual membership.
Shaughnessy: Where was the first official DC meeting held, and when?
Ferrari: Its official birth was in 1992. Dieter and I were making the rounds doing design-related workshops at that time, and spreading the word. Chapters started forming at a tremendous rate. We were up to 29 chapters within several months.
What is interesting to note is that a group of Atlanta designers had been meeting together for about a year under the leadership of Fred Pescitelli, at Phoenix Designs. They met to learn from each other, learn about new technologies, etc. Sounds familiar doesn’t it? They listened to what we offered, voted, and Atlanta became the first official chapter of the IPC Designers Council.
No matter where I traveled, the local designers basically said the same things. One that comes to mind was in Atlanta. One of the well-known designers, when asked the how he felt designers were viewed, indicated that the attitude was that designers were “pond scum.” We can certainly laugh at his colorful description, but I received similar answers no matter where I traveled.
To read this entire article, which appeared in the December 2015 issue of The PCB Design Magazine, click here.
Share on:
Suggested Items
PCB Layout Rules of Thumb for Consideration
11/25/2024 | Patrick Davis, Cadence Design SystemsJust because a “rule of thumb” is usually based on experience instead of precise facts doesn’t negate its value. For instance, when I told my kids that a good rule of thumb was not to back-talk to their mother, they discovered very quickly how accurate my advice was once they crossed that line. There are a lot of rules of thumb that we rely on daily, including those that apply to PCB design.
HPC Customer Engages Sondrel for High End Chip Design
11/25/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips, has announced that it has started front end, RTL design and verification work on a high-performance computing (HPC) chip project for a major new customer.
Rules of Thumb for PCB Layout
11/21/2024 | Andy Shaughnessy, I-Connect007The dictionary defines a “rule of thumb” as “a broadly accurate guide or principle, based on experience or practice rather than theory.” Rules of thumb are often the foundation of a PCB designer’s thought process when tackling a layout. Ultimately, a product spec or design guideline will provide the detailed design guidance, but rules of thumb can help to provide the general guidance that will help to streamline the layout process and avoid design or manufacturing issues.
PCB Design Software Market Expected to Hit $9.2B by 2031
11/21/2024 | openPRThis report provides an overview of the PCB design software market, detailing key market drivers, challenges, technological advancements, regional dynamics, and future trends. With a projected compound annual growth rate (CAGR) of 13.4% from 2024 to 2031, the market is expected to grow from $3.9 billion in 2024 to $9.2 billion by 2031.
KYZEN to Spotlight KYZEN E5631, AQUANOX A4618 and Process Control at SMTA Silicon Valley Expo and Tech Forum
11/21/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Silicon Valley Expo & Tech Forum on Thursday, December 5, 2024 at the Fremont Marriott Silicon Valley in Fremont, CA.