Rex Rozario: The PCB Industry’s True Renaissance Man
March 14, 2016 | Barry Matties, I-Connect007Estimated reading time: 9 minutes
Rozario: This was in 1954. In that very short period we were developing constantly. People wanted high-speed circuits. They wanted the metallic content pressed on the same plane—flush bonded circuits. They wanted rhodium plating. In the very early days we gained a lot of knowledge of plating, etching and materials. Then we had to find customers, but there was nobody using this. One of the first guys we went to was a guy with the last name of Roberts, from Roberts Radio. It's a very famous radio now, because it's still available after all these years, and it's a cultural thing now, to own one of the Roberts radios. He was the first guy that actually used our product.
Then of course the materials suppliers came—people like Formica, who were making laminates—and suddenly realized they could use the same laminate with copper sheeting on top, and epoxy would come in later. Fortunately, those were the very early days, and we started up this company with six to eight people; after 14–16 months we had about 125 people working.
Matties: That's fast paced growth.
Rozario: We then moved into a new facility which was owned by British Insulated Cables Co. They were making the flexible cables back then and there was a mixed technology where we could combine the two together. We were there for a couple of years and employed about 250 people, and Telegraph became the first printed circuit company in the UK. We were doing so well. We had Paul Eisler, who had Technograph, and he also started to manufacture, so we combined the companies and called it TNT, Technograph & Telegraph. At that point I was a specialist doing flush-bonded and flexible circuits. Back then you could take the copper and bond it on flexible laminar, and we did single- and double-sided boards, nothing else.
Later on, with the knowledge we had it was so easy to go into two- and four-layer multilayers. While all this was happening, suddenly this technology was widespread. Paul Eisler sold 16 of his licenses to the U.S., and one was for photo circuits. There were lots of people, GE and others, getting into it and suddenly worldwide, especially in the U.S. and UK, there were lots of little companies starting up around manufacturing PCBs. A new company was starting in Wokingham, England and a chap came to me from it. I was quietly headhunted and asked if I would like to come in and start a new company, Techtonic, with these guys who had a printing firm on Denmark Street, in Wokingham. I went over there and became a kingpin. I had a shareholding! I was only 23 and I was a director. [Laughs]
That's the year I got married and so forth and everything happened. We overtook Technograph and Telegraph in technology and size. We were employing 260 and they were employing about 200. I was there for a few years. I had two children by that time, and any vacation was jumping in the car and driving into Devonshire, which has all the beautiful beaches and moorland. My wife said, "You started up two companies, why don't you have a go on your own." We took a chance and came up to Devon. I remember we found a small place, rented it in Axminster, and then I had to go and find a bank. I met with the bank manager later on.
I said I wanted some information and wondered if this was a good investment. He said he was not the right guy to give out any advice on investments because he advised his wife two weeks earlier to buy shares in Rolls Royce and heard this morning they've gone bust. This was Rolls Royce in the early days. We got friendly and we started there. Then one of our customers went into receivership, and I went to a creditors meeting and met another chap who said he had some buildings and asked if we wanted to come and merge with them. They were making handbags, and he had a handbag factory and mechanical engineering facility, which was great. We started off in a big way and by that time we were putting in plated through-holes.
Matties: The technology was moving fast.
Rozario: Very fast. Then of my two partners, one guy was going into Malta, because the island was developing and he spent a lot of time there. So I was running his engineering company. The handbag guy was 82 and got married with a Rolls Royce and all that. He was never there either, so I was running a handbag factory, doing mechanical engineering and trying to run Graphic all at the same time.
Matties: And how old were you at that point?
Rozario: By that time I had grown up. I was about 29, I think.
Matties: You had some experience now.
Rozario: Fortunately, when we went into Axminster, Racal (now Thales) moved about two miles away and we became their sole supplier of subassemblies. That was obviously very encouraging and made us grow very fast. Then I realized running Graphic and two other companies was not working out and I said to the guys, "Look, buy me out, or I'll buy you out." They said, "Well if you buy us out then you have to move all your equipment." I said, "That's not going to work." So I left. I came out to Crediton, Devon, in 1972, and I started again with six guys.
Matties: At this factory that we're sitting in today?
Rozario: Not here, this is the new factory. We were on another site, and we built a factory. Then we went to five sites all around. Of course, then we decided in the worst recession to start designing this new factory and we moved here in 1992. So Graphic actually has been in Devon for about for 48 years.
The experience we have had from day one. Most of the people here, about 70%, have been here for more than 15 years. There are some guys going back 25–30 years. All the directors have been with me for 40 years.
Matties: That is a lot of experience.
Rozario: We grew up on the shop floor, we know what we are doing and we train guys up, and the cost of labor is very good. They're all local people within a 10 mile radius. It's very consistent. They don't want to be headhunted or go somewhere else, because this a beautiful area to live near the beach, near the wild horses and so forth, with wild birds and various things. The beaches and moorland are all around us. Exeter is now one of the most popular cities in the South West.
Of course, Graphic hasn't stopped there. In Part 2, The Beat Goes on: New Developments at Exeter, the Music Scene, and China, we learn how Graphic is still developing, including their work at Exeter University, more about what they’ve accomplished in China, and Rex—the music man.
Suggested Items
Elephantech: For a Greener Tomorrow
04/16/2025 | Marcy LaRont, PCB007 MagazineNobuhiko Okamoto is the global sales and marketing manager for Elephantech Inc., a Japanese startup with a vision to make electronics more sustainable. The company is developing a metal inkjet technology that can print directly on the substrate and then give it a copper thickness by plating. In this interview, he discusses this novel technology's environmental advantages, as well as its potential benefits for the PCB manufacturing and semiconductor packaging segments.
Trouble in Your Tank: Organic Addition Agents in Electrolytic Copper Plating
04/15/2025 | Michael Carano -- Column: Trouble in Your TankThere are numerous factors at play in the science of electroplating or, as most often called, electrolytic plating. One critical element is the use of organic addition agents and their role in copper plating. The function and use of these chemical compounds will be explored in more detail.
IDTechEx Highlights Recyclable Materials for PCBs
04/10/2025 | IDTechExConventional printed circuit board (PCB) manufacturing is wasteful, harmful to the environment and energy intensive. This can be mitigated by the implementation of new recyclable materials and technologies, which have the potential to revolutionize electronics manufacturing.
Connect the Dots: Stop Killing Your Yield—The Hidden Cost of Design Oversights
04/03/2025 | Matt Stevenson -- Column: Connect the DotsI’ve been in this industry long enough to recognize red flags in PCB designs. When designers send over PCBs that look great on the computer screen but have hidden flaws, it can lead to manufacturing problems. I have seen this happen too often: manufacturing delays, yield losses, and designers asking, “Why didn’t anyone tell me sooner?” Here’s the thing: Minor design improvements can greatly impact manufacturing yield, and design oversights can lead to expensive bottlenecks. Here’s how to find the hidden flaws in a design and avoid disaster.
Real Time with... IPC APEX EXPO 2025: Tariffs and Supply Chains in U.S. Electronics Manufacturing
04/01/2025 | Real Time with...IPC APEX EXPOChris Mitchell, VP of Global Government Relations for IPC, discusses IPC's concerns about tariffs on copper and their impact on U.S. electronics manufacturing. He emphasizes the complexity of supply chains and the need for policymakers to understand their effects.