The Government Circuit: From Tax Policy to Tariffs, Denver to Delhi, Speaking Up for Electronics 
Global Sourcing Spotlight: Evaluating a Supplier’s Capabilities
Global Citizenship: Cultivating Cross-border Partnerships With Integrity
Metcal to Exhibit with SmartTec at SMT Nuremberg
April 12, 2016 | MetcalEstimated reading time: 2 minutes
Metcal has announced that it will exhibit in Hall 7, Stand 109 with distributor SmartTec at the upcoming SMT/Hybrid/Packaging show, scheduled to take place April 26-28, 2016 at the Messe in Nuremberg, Germany. Metcal’s Scarab Site Cleaning System (APR-2000-SCS) will be on display, along with the Scorpion Rework System, the MX-5200 Soldering & Rework System, and the soon-to-be-launched Solder Wire Feeder.
The Scarab ensures accurate and repeatable cleaning of the component pad in one user-friendly system. It redefines performance and addresses the technical demands presented by component manufacturers today. Additionally, the Scarab addresses the industry needs with an automated system capable of cleaning components pads without contact.
The Scorpion System redefines precision and addresses the technical demands presented by component manufacturers today. Features include a placement package capable of 50mm of motorized travel in the Z-axis and a full 360° in ϴ (Theta). The placement package offers fine motor control in the Z-axis and ϴ during alignment of the component to the pad. Also included is a new force feedback control during the placement process, enabling the unit to accurately pick and place components without disturbing the component or solder.
The MX-5200 features a dual-simultaneous use option, meaning that two hand-pieces can work from one power supply at the same time. The dynamic option enables the two hand-pieces to share 80 watts output power based on demand, adding even more application flexibility and speed. Four different hand-pieces and a comprehensive range of soldering and rework cartridges support the MX-5200 Series simultaneous dual operation. These include the Metcal Advanced™Hand-Piece for SMD rework, a Metcal Ultra-Fine™ Hand-Piece for fine access, a Precision Tweezer capable of removing a range of components from 0201 chips to 28mm SOICs, and a Desoldering Gun for safely removing through-hole components.
The USF-1000 Solder Wire Feeder System adds control and convenience to the soldering process. The digital controls, high performance, and its ability to handle multiple solder diameters provide repeatability and functionality to the process. The USF-1000 pairs with the Metcal MX-5200 or MX-500 Soldering and Rework Systems.
For more information about Metcal stop by Hall 7, Stand 109 at the show, or click here.
About Metcal
Since 1982, Metcal has been a recognized worldwide leader in the electronics assembly marketplace. As part of OK International, Metcal’s industry-leading position addressing advanced technology in conduction soldering and rework/repair, has and will continue to broaden to a full electronics bench tool single-source solution. Metcal product lines currently include: hand soldering and desoldering, convection rework products, fume extraction and fluid dispensing tools.
Share on:
Suggested Items
SolderKing’s Successful Approach to Modern Soldering Needs
06/18/2025 | Nolan Johnson, I-Connect007Chris Ward, co-founder of the family-owned SolderKing, discusses his company's rapid growth and recent recognition with the King’s Award for Enterprise. Chris shares how SolderKing has achieved these award-winning levels of service in such a short timeframe. Their secret? Being flexible in a changing market, technical prowess, and strong customer support.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
Breaking Silos with Intelligence: Connectivity of Component-level Data Across the SMT Line
06/09/2025 | Dr. Eyal Weiss, CybordAs the complexity and demands of electronics manufacturing continue to rise, the smart factory is no longer a distant vision; it has become a necessity. While machine connectivity and line-level data integration have gained traction in recent years, one of the most overlooked opportunities lies in the component itself. Specifically, in the data captured just milliseconds before a component is placed onto the PCB, which often goes unexamined and is permanently lost once reflow begins.
BEST Inc. Introduces StikNPeel Rework Stencil for Fast, Simple and Reliable Solder Paste Printing
06/02/2025 | BEST Inc.BEST Inc., a leader in electronic component rework services, training, and products is pleased to introduce StikNPeel™ rework stencils. This innovative product is designed for printing solder paste for placement of gull wing devices such as quad flat packs (QFPs) or bottom terminated components.
See TopLine’s Next Gen Braided Solder Column Technology at SPACE TECH EXPO 2025
05/28/2025 | TopLineAerospace and Defense applications in demanding environments have a solution now in TopLine’s Braided Solder Columns, which can withstand the rigors of deep space cold and cryogenic environments.