-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueWet Process Control
In this issue, we examine wet processes and how to obtain a better degree of control that allows usable data to guide our decisions and produce consistently higher-quality products.
Don’t Just Survive, Thrive
If we are to be relevant and prosper during these next critical decades in electronics, we must do more than survive. As an industry, we can and must thrive. In this issue, our contributors explore these concepts meant to help you take your business to the next level.
Material Matters
Materials management is nuanced, multifaceted, and requires a holistic systems approach for business success. When building high mix, low volume, and high technology, managing materials and overall cost containment are even greater challenges.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Vertical Conductive Structures–a New Dimension in High-Density Printed Circuit Interconnect
February 28, 2017 | Pete Starkey, I-Connect007Estimated reading time: 6 minutes
![](https://iconnect007.com/application/files/8616/3123/0483/Joan_Tourne.jpg)
From our previous conversations, I knew that Joan Tourné was working on a novel high-density interconnection concept. Having eagerly awaited the chance to discuss the technology in detail, I was delighted when he contacted me to confirm that his IP had been secured and that he could now talk openly about VeCS, the Vertical Conductive Structure designed to provide a cost-effective alternative for complex fan-out from fine-pitch grid array components.
Knowing Tourné’s long-term background in high-end PCB technology, from his many years as technical director at Mommers Print Service in the Netherlands, and subsequently as advanced technology and business director with Viasystems, I was curious to learn about his latest enterprise.
Starkey: Joan, it’s great to speak with you again. Tell me a little about NextGIn Technology BV.
Tourné: Yes, Pete, good to see you. NextGIn is a fabless shop based in the Netherlands, with extensive experience in the design and manufacture of high-end circuitry and a “make it happen” mentality. We are developing interconnect solutions for our partners in the semiconductor packaging and printed circuit board industries who need to advance their product performance or to cost-reduce their product. Presently we are working with a small group of selected OEMs in datacom, telecom and data processing markets to design and test our VeCS technology.
Starkey: What was the rationale behind the development of VeCS and what is the need for an alternative PCB concept?
Tourné: The big limitation of established HDI technologies is the density of vertical interconnections that can be achieved without going through many stages of sequential build-up. Grid array packages are driving PCB complexity, and PCB manufacturing technology is lagging. Through-hole techniques take up too much space, and we have got to the stage where holes cannot be placed closer together. Sequential build-ups are an expensive solution, and as the build-up construction gets more complex, the yield goes down. The challenge of routing conductors under fine-pitch grid arrays becomes increasingly difficult and is effectively a constraint on package development. And power distribution into the core of the package becomes difficult and expensive.
Starkey: So how does your “vertical conductive structures” concept overcome these limitations?
Tourné: Not only can we achieve higher interconnection density by packing more vertical connections in a smaller space, at the same time we can increase conductor routing channel density under grid array components. And we can do this without reducing line widths or spacings, so we can maintain high transmission line speed and enhance signal integrity by better signal-to-plane reference and higher current-carrying capacity in and out of the grid array. And because we don’t need to use sequential build-up technology, we reduce cost.
Starkey: That sounds very impressive. What are the key characteristics?
Tourné: VeCS is based on special formed cavities that can connect to multiple internal layers using less space than vias or microvias, leaving more room for conductor routing under area array components like BGAs. For example, a 0.65 mm pitch BGA can be successfully routed with VeCS, whereas a fan-out would not be possible with traditional vias. And VeCS causes much less disruption to ground and power planes and reference layers, which with traditional via technology would be reduced to a few small slivers of copper under the BGA. At the moment, we have test vehicles in manufacturing with a 0.4 mm pitch using single lamination processes.
Starkey: From the PCB fabricator’s point of view, does VeCS technology require substantial capital investment or significantly different process chemistry?
Tourné: No, to both parts of the question. No direct new capital equipment is required, and the technology is well within the established capability of any high-end board shop after appropriate training and licensing.
Starkey: So how do you form these cavities?
Tourné: There are several options, but let me describe a very basic example: Drill a row of holes, in the diameter range 0.1 mm to 0.5 mm, close together and separated by narrow webs of material. Remove these webs of material by drilling, routing or laser cutting, preferably on the same machine to achieve best registration. Once the structure has been formed, use standard PCB processes to clean, metallise and plate-up, then image and etch the surface conductor pattern. Finally, selectively remove copper from the plated cavity by drilling, to leave vertical copper traces where conductors are required. Perhaps a schematic diagram would help you to visualize the result (Figure 1).
Starkey: So how does this compare with conventional through-hole interconnection?
Tourné: The hole is replaced by a vertical trace or half-cylinder. The vertical trace is preferred for signal integrity performance. The structure can be filled and overplated depending on the application. More vertical connections can be created for a given surface area and, for impedance control, signal and ground conductors can be designed to face each other across the cavity.
Another benefit is that there is no CAF path between vertical traces.
Starkey: You mentioned cost savings. How do costs compare with conventional constructions and where are the savings made?
Tourné: The cost reduction is realised by making more efficient use of the conductor routing space and therefore reducing the layer count of the board. We offer design analysis service to demonstrate how VeCS can reduce cost in your product. With the use of more expensive materials, the reduction in the BOM cost is becoming significant. In various analyses conducted last year, we have demonstrated cost reductions in the range of 15% to 40%. In future articles, we can present cases of the cost reduction analysis.
Starkey: How far down the road are you with VeCS technology?
Tourné: We’ve progressed a long way since demonstrating the initial proof of concept, and we continue to work closely with leading OEMs and fabricators. One manufacturing example is a 12-layer test board, 2.2 mm thick, on MEGTRON6, with 0.5 mm, 0.75 mm, 0.8 mm and 1.0 mm BGAs routed on the same panel. We have subjected samples of this construction to six reflow cycles at 288°C, and found no evidence of interconnection failure. Results after six solder shocks at 288°C were similar (Figure 2). And we have taken daisy-chain test panels through multiple reflow cycles followed by thermal cycling to failure, with results comparable with through-hole examples. Regarding impedance control and signal integrity, I can show you some remarkably good TDR traces from the area under the BGA.
Starkey: What about design? Do any of the major CAD vendors offer the capability to generate designs based on VeCS technology?
Tourné: At the moment, we have two CAD software houses working on the technology and they have demonstrated capability already.
They have seen the advantage of the technology and continue exploring VeCS technology. We have also developed workarounds in some of the CAD systems, as shown in Figure 4. There is still some manual work, but we can demonstrate the technology and gain advantage of the VeCS benefits. We can also train and qualify your preferred PCB suppliers, and offer training to the OEM under a license agreement.
Starkey: Joan, I am very grateful for your time in introducing me to what I could confidently describe as a potentially disruptive PCB technology.
Tourné: Thanks for your interest, Pete. But I have only given you a glimpse of what this technology has to offer. I hope you have gained an understanding of the fundamental principles of what we can achieve. There is so much more I could explain about practical aspects, application opportunities and the VeCS technology roadmap. I would be delighted to prepare a series of detailed articles if you believe they would appeal to the designers and fabricators among your readers.
Starkey: That’s a splendid offer, Joan, and well worth pursuing. Many thanks, again.
Editor's Note: This interview originally appeared in the February 2017 issue of The PCB Magazine, click here.
Suggested Items
Kaynes Technology Selects Delvitech’s 3D AI-Based AOI Solutions to Keep Pioneering India’s Electronics Manufacturing
09/04/2024 | DelvitechDelvitech has announced that Kaynes Technology India Limited, a distinguished leader in electronic system design and manufacturing in India, has selected its cutting-edge 3D AI-based automated optical inspection (AOI) solutions. This strategic partnership marks a pivotal advancement in Kaynes Technology’s mission to remain at the forefront of the dynamic electronics industry.
Koh Young Welcomes Chris Treadway to Lead Sales in Key Regions of the U.S.
09/04/2024 | Brent Fischthal, Koh Young AmericaKoh Young Technology has announced the addition of Chris Treadway to its sales team in the United States. Chris will play a crucial role in our continued market expansion as he leads a team of sales partners in his new role as Regional Sales Manager for the Central and Northwest regions of the United States.
Altair Names Collaboration Betters the World as Channel Partner for the EMEA Region
09/04/2024 | AltairAltair, a global leader in computational intelligence, has named Collaboration Betters the World (CBTW) a new channel partner for Europe, the Middle East, and Africa (EMEA).
Space Flight Laboratory (SFL) Selected by NUVIEW to Develop Pathfinder Satellite Bus for Its Space-Based LiDAR Constellation
09/04/2024 | BUSINESS WIRESpace Flight Laboratory (SFL) has been chosen by NUVIEW, a space-technology company specializing in 3D Earth imaging, to develop the bus for Mr. SPoC, its pathfinder small satellite that will demonstrate the capabilities of the world’s first commercial space-based LiDAR constellation.
STARTEAM GLOBAL Announces Strategic Partnerships with Notion Systems and Peters Group
09/03/2024 | STARTEAM GLOBALSTARTEAM GLOBAL, an established printed circuit board (PCB) manufacturer with over 35 years of expertise, is pleased to announce new strategic partnerships with two German corporations: Notion Systems GmbH, a manufacturer of inkjet printing systems for functional materials, and Lackwerke Peters GmbH & Co. KG, also known as Peters Group, a full-range supplier of coating materials for electronics and PCBs worldwide.