Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Testimonial

"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."

Klaus Koziol - atg

Suggested Items

Standard of Excellence: Building Excellence From the Inside Out

05/27/2026 | Anaya Vardya -- Column: Standard of Excellence
You can’t have a world-class product without a world-class mindset. Every layer, lot, and customer success begins long before a board hits the lamination press or the AOI line. It begins with how people think, care, and take ownership of their work. Culture, in the truest sense, is process control. It governs consistency, integrity, and pride as surely as SPC charts and traveler sheets. If the culture isn’t right, neither will the product be.

Signal Integrity Meets Additive Innovation in the Latest Issue of I-Connect007 Magazine

05/18/2026 | I-Connect007 Editorial Team
Signal integrity and metallization are deeply intertwined, and this month’s I-Connect007 Magazine explores that convergence in detail. As Managing Editor Marcy LaRont explains, achieving electrical performance targets doesn’t stop at design; it depends heavily on how boards are fabricated, particularly through precise metallization processes.

Fresh PCB Concepts: Repair and Risk in Electrical Test Failures in PCB Manufacturing

05/21/2026 | Team NCAB -- Column: Fresh PCB Concepts
Electrical test failures represent one of the most critical decision points in PCB manufacturing because they directly expose defects that affect circuit functionality. Unlike cosmetic anomalies or minor process deviations, these failures indicate that the conductive network defined in the design has not been successfully realized in the finished product. Whether identified through continuity testing, isolation testing, or netlist verification, a failed electrical test confirms that the board cannot perform as intended. At this stage, the question is no longer simply whether a defect exists, but whether it can (or should be) repaired.

Global Sourcing Spotlight: The Global Quality Gap—Why Consistency Wins the Contract

05/18/2026 | Bob Duke -- Column: Global Sourcing Spotlight
There was a time when you could tell where a product was from by how it felt, fit, or functioned: German precision, Japanese consistency, or American durability. Today, the lines are blurred. The best factories in Vietnam rival those in Texas, and Mexican plants match the efficiency of Taiwan. However, as quality expectations converge worldwide, execution doesn’t. The global quality gap continues to widen. The definition of quality is no longer regional; it’s universal.

Road to Reliability: Engineering High Uptime EV Charging Infrastructure

05/13/2026 | Stanton Rak, SF Rak Company
The transition to EVs is no longer constrained solely by vehicle capability. Instead, it is increasingly defined by a simpler, but more unforgiving question: Will the charger work when I arrive? This high uptime does not happen by accident. As EV technology has matured, limitations in battery range, power electronics, and thermal management are no longer the primary barriers to adoption.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in