-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueCertifications
Certifications have historically been seen as a cost of doing business, but how do we turn them into a positive ROI and a value to both customer and vendor?
The Butterfly Effect
The basis of chaos theory is a key concept known as the “butterfly effect.” It’s the idea that a small event in one place creates a cascading set of events elsewhere. So, how is the EMS landscape changing? We’re tracking the concerns and dynamics of this landscape, and there’s a lot to learn.
Coming to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Assembly of Flexible Circuits
April 6, 2017 | John Talbot, Tramonto CircuitsEstimated reading time: 7 minutes
![](https://iconnect007.com/application/files/4916/3123/1321/JohnTalbot250.jpg)
A flexible circuit assembly consists of a bare circuit with conductive patterns etched onto it that allow the attachment of components that, when completed, results in a working electronic product. Components are available in different shapes, sizes and methods of attachment. There are through-hole components that have wire leads that, as the description states, go through-holes in the circuit and are soldered. Surface mount components, intuitively, are placed on surface pads and soldered to the circuit. The number of different configurations of through-hole and surface mount components are vast. The typical method of attachment is by soldering the component to a conductive pattern. Some components are soldered one lead at a time by hand. Others are placed automatically by machine and run through an oven to solder the entire board at the same time. No matter the method, the assembly of electronic flexible circuits is tedious because of its inherent flexible nature. Therefore, we must give extra attention to the assembly process.
Flexible Circuits
Flexible circuits are made from a thin plastic substrate of polyimide or polyester. The most widely used material for flexible assemblies is polyimide (poly im id) because it can withstand the high temperatures required to solder components without negative effects. Polyester circuits shrivel up when exposed to those temperatures and make them less appropriate for flexible assemblies. The polyimide material is laminated to conductive layers and insulating layers with epoxy or acrylic based adhesives. The final product is a very thin, typically .010”, overall thickness. This is the characteristic that makes assembly on flexible circuits more difficult than traditional printed circuit boards which are 1/16” thick and sturdy. The inherent nature of a flexible circuit demands high attention to handling during the assembly process. Whether hand soldering or automated soldering, the circuits must be supported for consistent results. The discussion below will focus on the processes that will make any flexible circuit assembly successful.
Figure 1: Flexible circuit.
Moisture and Flexible Circuits
Before we can start any assembly on a flexible circuit, we must first bake out the moisture. This is done in a dry oven at low temperature for several hours. The intent is to evaporate all moisture that has been absorbed by the plastic and adhesive layers during storage. This is a bigger problem during the summer months when atmospheric humidity is high. Less of an issue during the dryer winter months. However, no matter the season, if the moisture is not baked out, negative results are possible.
When introduced to the high temperatures required to melt solder, 680°F to 750°F, the moisture trapped between the layers can boil quickly and cause the laminated layers to separate. Once the layers are separated the flexible circuit cannot be used reliably as it allows air into the circuit which contains water, that will eventually corrode and render the circuit useless. It is a prudent first step in any circuit assembly process to bake out the moisture.
Solder Choices for Assembly of Flexible Circuits
Before the year 2000, most circuit assemblies used solder that consisted of tin and lead. A popular ratio of the alloy was 63%tin and 37%lead. However, the European Union passed a directive named Restriction of Hazardous Substances, commonly known as RoHS, or Directive2002/95/EC. It restricted the use of lead, mercury, cadmium and other substances in products sold there. Electronic industries worldwide were affected and had to come up with a substitute for the tin/lead alloys that had been used for decades.
Today, both RoHS and non-RoHS solders exist and are used. A typical RoHS compliant solder will contain no lead and be made instead of tin, silver and copper. This new solder requires higher temperatures to melt than the tin/lead versions and looks differently as well.
Both RoHS and non-RoHS solders come mixed with flux that must be cleaned or flux that does not require to be cleaned. The flux in the version that requires cleaning is very corrosive and can be conductive if left on the circuit, but is easily cleaned with water. The flux in no-clean solder leaves an inert clear residue that may remain on the circuit forever without adverse effects. The use of these solder options on flexible circuits is common and generally requires no special considerations, aside from the melting temperature.
Hand or Manual Soldering Process
The hand or manual soldering process requires a skillful assembler to attach components to a flexible circuit one solder joint at a time. A compliant solder joint, defined by the governing body, IPC, makes no distinction for flexible circuits. The complications added to the solder process come from the thin flexible nature of the circuit. For instance, if a component is inserted or placed with too much pressure, the material can wrinkle and may create a void under the component that could allow foreign material to gather.
Figure 2: Hand solder.
Another concern during hand assembly is how to keep the circuit in a static condition so that it doesn’t move when the solder or iron is placed on the component. It’s difficult enough to solder components manually, but that difficulty is magnified when the circuit is not static. Trying to create a compliant solder joint on a moving target is the highest level of frustration.
Therefore, it is common to create fixtures to assist in the hand assembly of flexible circuits. The fixture is used to keep the circuit flat and still during the process. The fixture is an invaluable aid to the assembler.
Automated Soldering Process
The automated soldering process is typically done on multiple circuits designed in a matrix to form a panel. This panel can then have solder applied, go into a machine that will load all the components to their proper locations/orientations and finally run through an oven to solder the entire panel. This is much easier to describe than to put into practice.
Figure 3: Carrier panel.
The complications are many when flexible circuits are the point of discussion. The screening process and component placement puts a great deal of pressure on the circuit that requires tooling to be designed specifically for each circuit. A typical way to fixture a flexible panel is to create a “carrier” that is used to carry the circuit through the entire process. It provides a stable surface that assists in consistent assembly and eliminates much of the laborious tedium associated with the assembly of flexible circuits. With the use of carriers, the flexible circuit panel can run through the entire process with little or no issues.
Page 1 of 2
Suggested Items
Altus Highlights Success of Essemtec's I2S in the UK and Ireland Market
07/23/2024 | Altus GroupAltus Group, a leading distributor of capital equipment for the electronics industry in the UK and Ireland, is pleased to highlight the success of Essemtec's Integrated Inspection System (I2S).
Automatic Paste Transfer and Quick Change Squeegee for ASMPT Printers
07/23/2024 | ASMPTASMPT, the market and innovation leader in SMT manufacturing technology, has added two new features to its proven DEK printing platforms that automate solder paste transfers and simplify squeegee changes.
New Breakthrough in Double-Sided Reflow Part Retention from Alltemated
07/19/2024 | AlltematedAlltemated's PLACE-N-BOND™ underfilm passed testing and was implemented in volume production to aid in component retention during the second pass reflow of printed circuit assemblies. This successful testing and implementation occurred in various applications with components such as capacitors, inductors, transformers, connectors, and larger ICs.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics, Chapter 2
07/17/2024 | I-Connect007 Editorial TeamIn this chapter, we’ll focus on the most important analytics at the forefront of SMT, from the solder paste machine to placement machines, and breakdown these metrics from the perspectives of the different decision makers involved in the process. The lead SMT shift manager isn’t going to have the same concerns as a quality manager, so it’s important to look at how each machine and operation contains valuable KPIs for each role.
SMTA Heartland Chapter Announces Rescheduled Date for High Reliability: Virtual STAR Forum
07/10/2024 | SMTAThe SMTA Heartland Chapter announces the rescheduled date for the High Reliability: Virtual STAR Forum, following the overwhelming success of our May event. Join us on Tuesday, July 30, 2024, for an afternoon of engaging discussions and expert insights into high-reliability manufacturing.