Average Contract Price of PC DRAM Modules Posts Sequential Monthly Gain in July
August 7, 2017 | TrendForceEstimated reading time: 3 minutes
DRAM prices began to rise in the second half of 2016 and have maintained a strong upward momentum through the first half of 2017, according to data from DRAMeXchange, a division of TrendForce. The average contract price of PC DRAM modules rose by nearly 40% sequentially in the first quarter to US$24 and then by more than 10% sequentially in the second quarter to US$27. Furthermore, the average contract price of PC DRAM modules increased by about 4.6% between this June and July. DRAMeXchange’s price forecast for this year’s second half indicates and steady and incremental gains as the general trend in the DRAM market.
The temporary suspension of the MTTW fab in July and the upcoming busy season will strain the already tight DRAM supply
“The DRAM market in the second half of this year will be entering the busy season with tight supply made worse by the temporary suspension of N2 (Fab-2) owned by Micron Technology Taiwan (MTTW),” said Avril Wu, research director of DRAMeXchange. MTTW was formerly known as Inotera before Micron’s acquisition. The company’s fab N2, which is located in Taiwan, suffered a contamination event caused by malfunctioning gas equipment at the start of this July and halted production for two weeks for the cleanup.
The latest update from DRAMeXchange regarding N2’s status reports that the facility has resumed normal operation since mid-July. In terms of damages, just over 20,000 pieces of wafers were ruined by the contamination, and N2’s wafer starts were reduced by about 30,000 pieces during the two-week suspension. In total, MTTW lost around 50,000 pieces of DRAM wafers. As the DRAM market heats up again in the year’s second half due to seasonal demand, this loss will certainly exacerbate the undersupply situation.
MTTW is making its best effort to increase wafer starts in the hope of making up for the lost production period. The chance of worsening supply shortage in the DRAM market in September will depend on MTTW’s ability to offset the wafer loss.
Mobile and server application markets continue to show strong demand
DRAMeXchange’s research also finds that bit demand growth will far exceed bit supply growth in DRAM market for the entire 2017. The annual bit supply growth rate for this year is currently projected at 19.5%, which is much lower than the 25% average growth rate of the previous years. The annual bit demand growth by contrast is estimated to be more than 22%.
Looking ahead, the mobile application will still be the main source of consumption of the global DRAM supply. Even though Chinese smartphone brands have marked down their shipment projections, Apple and Samsung will be releasing the next-generation models of their respective iPhone and Galaxy Note series in this year’s second half. Equipped with more memory, these and other upcoming high-end smartphones will remain the main growth driver of DRAM bit demand.
DRAMeXchange’s price analysis shows that average contract price of PC DRAM modules rose by 4.6% in July compared with June, while the average contract price of server DRAM modules also register a sequential monthly price increase of more than 3%. The price trend for mobile DRAM is starting off flat at the beginning of this third quarter but is likely to move upward later in the fourth quarter. Suppliers especially want to correct the current strange situation of PC DRAM’s ASP being higher than that of mobile DRAM.
On the whole, TrendForce expects very limited capacity expansion for the second half of 2017, so DRAM suppliers will adjust their product mixes based on product margins. The price forecast for this year’s second half indicates small and gradual increases as the general trend.
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Finding Your Marketing Niche in a Crowded PCB Industry
03/10/2026 | Richard Nichols, GreenSource EngineeringI recently made a flippant comment on LinkedIn, “All marketing and no trousers,” hinting that marketing campaigns often do not have a tangible product to market and the campaign is marketing a concept or a gut feeling. For PCB and IC substrate manufacturers, this poses a great risk for unsuccessful campaigns and the opportunity to innovate in an increasingly competitive and global landscape.
Beyond the Board: How Advanced PCB Design Is Reshaping Mil/Aero Electronics
03/10/2026 | Jesse Vaughan -- Column: Beyond the BoardAs mil/aero electronics evolve toward higher data rates, greater processing density, and tighter mechanical envelopes, integration is no longer occurring primarily at the box level, but rather deep within the electronic architecture itself, often beginning at the printed circuit board.
Technology Pavilion Debuts at APEX EXPO 2026
02/26/2026 | Global Electronics AssociationMany of the technologies shaping the future of electronics manufacturing, particularly in areas such as 3D integration, digital manufacturing, advanced design workflows and automated metrology, are moving faster than traditional publication and standards cycles. The APEX EXPO 2026 Technology Pavilion will bring technology innovators such as these to the forefront, through a dedicated space where emerging tools, approaches, and early-stage breakthroughs can be shared with attendees.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
02/13/2026 | Michelle Te, I-Connect007This week, I’ve taken some extra time to better learn some video and photo editing software programs we use at I-Connect007. You’ll want to check out my LinkedIn video to see how I brought my avatar to life for this week’s must-reads! The items I’m highlighting this week are also about learning something new, from Pete Starkey’s thorough three-day review of the EIPC Winter Conference in Aix-en-Provence, France, to what’s on the horizon for advanced electronics packaging. I also share details about the new Design Village at APEX EXPO 2026, preview a new column from Remtec’s Chandra Gupta, and discuss why marketing isn’t a one-and-done deal.
Fresh PCB Concepts: Cost Stability in a Period of Copper and Gold Volatility
02/12/2026 | Team NCAB -- Column: Fresh PCB ConceptsAnyone who works with PCBs in any capacity right now can feel that copper and laminate prices are not stagnant, gold price is increasing even faster, and the impact shows up quickly on PCB quotations. For many design teams, this feels like a force outside their control. Raw materials go up, and the board cost goes with it. I want to highlight that many of these swings are manageable.