-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueSolder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
A Culture of Thriving
One cannot simply command thriving; it must be nurtured, developed, and encouraged. In this issue, we explore strategies to improve your working relationship model—both internally and externally. In this culture of thriving, your business will grow in the process.
Certifications
Certifications have historically been seen as a cost of doing business, but how do we turn them into a positive ROI and a value to both customer and vendor?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Training and Education: Key to Improving Electronics Assembly
August 16, 2017 | Stephen Las Marias, I-Connect007Estimated reading time: 15 minutes
![](https://iconnect007.com/application/files/3816/3123/7006/Stephen_LasMarias1.jpg)
For this month's issue of SMT Magazine, we spoke with Luis Ramirez, COO, and Dan Prina, project manager of Lean enterprises and continuous improvement, at EMS firm MC Assembly to discuss the challenges of and strategies in improving the PCB assembly process from an EMS provider’s perspective. We also spoke with Manncorp's Tom Beck, director of marketing, and Chris Ellis, Eastern sales manager, to get their viewpoints on the subject as an equipment provider.
"From my perspective, from a management standpoint, first and foremost, improvement is a philosophy, and whatever you're doing today there’s always a better way to do it tomorrow. One of the biggest paradigms that we see across the industry is that one thing that may have worked in the past, we keep trying it and we keep trying it, and it may not work today because variables may have changed and the environment may have changed. That’s one of the biggest paradigms that, from a management standpoint in manufacturing, we have to remove, because what worked in the past not necessarily is going to work in the future," explains Ramirez. "For us, first we want to have a standard. We want to make sure that we partner with our suppliers of equipment and create standards so that we know when there is a problem, when there is an event that is outside a standard, it is easier to troubleshoot and easier to determine the root cause. Having said that, once you have a standard established, then you have to measure. You have to create a metric to understand whether or not you’re meeting your expected output out of that standard. With that measurement, then you are able to provide real-time feedback. That’s what drives a lot of the continuous improvement activities when we see trends. For example, when we look at the work that has been done in the previous day and we see a problem that keeps repeating that triggers a review, and triggers a team meeting or a kaizen event for the team to get together and figure out the root cause. What could be causing the problem and then second, what actions we could implement to eliminate or minimize the problem."
Ramirez notes that in today’s world of electronics, the PCBA real estate has become more and more critical. There are now a lot of low-profile BGAs. There are a lot of very small components that are all in very difficult areas inside a circuit board. "Even if you have great equipment, you still need to have that human intelligence that is able to figure out the right process to minimize any problem," Ramirez says.
He notes, though, that it does require having the equipment that is capable, but so is having the technical and the expertise and experience to be able to look at a problem and say, 'Yes, I know I can do A, B or C.'
"If you cannot figure it out, you should be able to pick up the phone and call the manufacturer of the equipment, call the manufacturer of the part, and even invite all of them and tell them, 'Hey, I’ve got this problem. How do you guys think we can solve it?' Again, sometimes what we think is a simple problem actually may require a very complex solution. In our world, there is no such thing as a simple problem," adds Ramirez.
One of the key measurements they base their improvements on is the overall cycle time. "Initially, what we wanted to do was to just feed it into our machines, we’ve always had a big focus on the technology of it. We’ve invested pretty heavily in some really good equipment. What we’ve found lately though is there’s a lot to be said for the simplicity," says Prina. "We definitely manage from a point where we look at running simulations and we know where our expected run times are on our equipment, but if you fail to manage the downtime, if you fail to manage the hand touch labor further on down the line, it can create a lot of problems. We have a phase-gate controlled process NPI release that goes step-by-step through the process. We try to identify what our problems are upfront but there’s certainly still quite a bit being done out on the floor once it’s released, and we go through that process. That’s when we try to get our operators engaged and getting that feedback from them, where we can minimize times lost, where we can engage some efficiency, and just getting that feedback back up to the PDM group to rewrite those processes or to engineering for review is really critical."
Do they go back to their customers and suggest some modifications for future revisions? Ramirez says they do. "As Dan explained, in a perfect world during the pre-production type run, there are a lot of these sins that should have been identified and, in theory, should have been corrected. What we’re finding is, in many cases, many of our customers’ development phase take more time than projected in their tollgate process to bring a product to life. They consume all the work for one reason or the other in the design phase to the point that by the time you want to prove your design, it’s way too late. In many instances, we are facing a situation in which the product has launched, even with a fault or deficiency we may have identified, because there is a pressure for that customer to launch a product," Ramirez explains. "We like to view ourselves as adding value to our customer. At MC, we’re going to do our best to provide you, based on your design, a good product. However, we’ve got to work together. We’ve got to be partners so that, at the end of the day, if we can improve your design and it's going to make our assembly process better, that is going to be an economical benefit for both companies. For the most part, most customers tend to take that feedback and in the next revision they fix it."
But he says they have other customers who are facing difficulty in changing the design because of third-party approvals or very long testing.
"Again, we have a mix of some that early in the process as we are doing the prototypes. We're able to provide feedback, which then they use to refine their design versus the other ones that they get the feedback but they realize that, 'Hey, I don't have the time.' It's going to be changed in the next revision. Then we have to live with that situation. Therefore, that's where it's critical to have all the controls that we put in place, like Dan was mentioning, we've got to figure out how to do it and how to do it well," says Ramirez.
Ellis agrees, saying that a lot of customers just don’t know how to design for manufacturability. "We often have to guide them so that their designs are consistent with their capabilities and available resources. For example, a customer may have a BOM with 175 different part numbers, which would necessitate multiple pick-and-place machines, when they really don’t have the budget for that. We can often assist them in designing their product in a way that meets the capability of equipment they can afford," he says.
Beck adds that many of their customers, especially the larger companies, will invest in their own prototyping equipment to be able to work out a lot of these issues in advance, before turning a product over to an assembler, who would produce the boards on a much larger scale when necessary.
Training and Education is Key
Overall, one of the key factors that these experts point to when it comes to improving the PCB assembly process is training and better education, as most of the people in the line just don’t have any formal training in electronics assembly methods.
Page 1 of 3
Suggested Items
AIM to Present on Ultra-Miniature Assembly for Mini/MicroLEDs at MicroLED Connect
09/03/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming MicroLED Connect Conference and Exhibition taking place September 25-26 in the Conference Center at High Tech Campus Eindhoven in The Netherlands.
Solder Printing: SMT007 Magazine—September 2024
09/03/2024 | I-Connect007 Editorial TeamIn this issue of SMT007 Magazine, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging. Join us as we look at the latest in solder printing equipment, printable solder pastes, and the opportunities they present.
NEOTech Enhances Manufacturing Edge with New Integrated Microelectronics and SMT Assembly Expansion
08/28/2024 | NEOTechNEOTech, a leading provider of electronic manufacturing services (EMS), design engineering, and supply chain solutions in the high-tech industrial, medical device, and aerospace/defense markets, is proud to announce the expansion of its microelectronics clean room and assembly line.
Adam Klett, KYZEN Director of Science, Re-elected to SMTA Board
08/21/2024 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries is proud to announce the re-election of Adam Klett, KYZEN Director of Science, to the SMTA Global Board of Directors. During his first term on the SMTA Global Board of Directors from 2021-2024, Klett lead the Students and Young Professionals Committee in addition to serving on the Strategic Development Committee. He is currently chair of the Nominating Committee for 2024.
The Knowledge Base: Enhancing Customer Loyalty and Product Quality
08/21/2024 | Mike Konrad -- Column: The Knowledge BaseIn the fiercely competitive landscape of the electronics assembly industry, fostering customer loyalty and consistently delivering superior products or services are paramount to long-term success. This industry, marked by rapid technological advancements and dynamic market demands, requires a proactive approach to stay ahead.