Institute of Circuit Technology Meriden Seminar, 2018
March 21, 2018 | Pete Starkey, I-Connect007Estimated reading time: 8 minutes
The Institute of Circuit Technology returned to Meriden, traditionally regarded as the centre of England, for its Annual General Meeting, which was followed by a technical seminar of five presentations, introduced as ever by Technical Director Bill Wilkie.
Steve Payne, ICT Vice-Chairman and Manager of European Operations for the International Electronics Manufacturing Initiative (iNEMI), gave an introduction and brief overview of the organisation in his presentation on future opportunities for PCB technology. He explained that iNEMI was a not-for-profit R&D consortium of leading electronics manufacturers, suppliers, associations, and government agencies, that encompassed all market sectors and technologies in electronics manufacturing, from design and modelling through to test, as well as recycling and sustainability issues. A principal objective was to roadmap the future technology requirements of the global electronics industry and to identify, prioritise and eliminate the gaps by engaging in timely R&D projects. The iNEMI roadmap represented the global collaboration of leading experts representing all aspects of the electronics industry, with a ten-year outlook that provided a perspective on technology trends and challenges. A unique characteristic of iNEMI projects was that they could leverage skills and resources across market sectors and throughout the supply chain.
Payne examined some of the issues associated with miniaturisation and high-density interconnect, embedded components, optical PCBs, flexible and stretchable circuits, and discussed the role of Industry 4.0 and the Industrial Internet of Things in the PCB fabrication sector. He commented that although most individual PCB fabricators had limited R&D resources, they could benefit from participation in collaborative projects to make the most of their collective expertise, and this would be a topic he would raise for discussion at the forthcoming PCB Fabricators’ Group meeting.
Dr Neil Chilton, Technical Director of Printed Electronics Ltd (PEL), gave a market overview of printed, conformal and flexible electronics, discussed PEL’s activities and areas of expertise, and introduced some novel techniques that used printing to create electronic devices or combined PCB technologies with printed electronics and additive manufacturing to produce “unconventional” circuitry and interconnects.
The market for “large area electronics,” a classification which included printed electronics and organic electronics, was expanding rapidly, particularly in the areas of displays and lighting. There was a substantial demand for printed sensors, predominantly mass-produced glucose test strips, but continued growth was forecast for non-biological sensors, principally photo-detectors, gas sensors and temperature sensors. In stretchable electronics, the key innovation areas were stretchable inks, flex-to-rigid connections, and sensor structures and materials.
Dr Chilton discussed opportunities for nano-metal inkjet printed circuits in stretchable and conformable electronics technologies, where a principal advantage was the elimination of conventional substrates by printing directly onto pre-existing surfaces. A limitation was that the circuitry was usually thinner, more fragile and more resistive than conventional electronics, and could not carry significant current. However, if inkjet was used to print a seed layer, more substantial conductors could be built up by electroless metal deposition. Screen printing was an alternative technique for the manufacture of sensors and ultra-thin flexible circuits and gave access to different materials and more robust structures. In aerospace applications, printed and large area electronics offered weight savings and opportunities for thin, long form factors.
Inkjet nano-particle inks were generally of very low viscosity and low metal content, and even on high quality substrates, conventional piezo-electric printers could not approach the resolution that could be achieved by photolithography. And it was difficult to print on curved surfaces. One of PEL’s innovations was their “3D Surface Printer,” with a programmable Z-axis, for non-contact digitally printing thicker deposits of viscous high-metal-content inks onto three-dimensional objects. And a multi-axis system had now been developed. Dr Chilton showed examples of printing on cylindrical pre-forms to create antennas for a defence application. It was also possible to use the technique for producing embedded electronics.
But at the other end of the resolution scale, a process for printing one-micron track and gap features was now available, known as “Super-Fine Inkjet,” with an electro-hydrodynamic system for generating drops in the sub-femtolitre range.
Dr Chilton stressed that printed electronics would not replace PCB technology but offered complementary production methods to enable new form factors, using a combination of new technologies and adaptations of established techniques.
ICT Chairman Professor Andy Cobley, leader of the Functional Materials Research Group at Coventry University, gave an introduction to the ‘MATUROLIFE’ project, funded under the Horizon 2020 programme, with over 20 collaborating organisations from across Europe. The project aimed to produce innovative assistive technology for older people, for example alarms and tracking devices, that would achieve better integration of sensors into fabrics and textiles, allowing designers to create high-added-value products that were not only functional, but also more desirable and appealing to older people as well as being lighter and more comfortable. Creative artists and fashion designers were included in the research team to facilitate design-driven innovation.
Conductivity and electronic connectivity in textiles could be achieved by encapsulating fibres with metal and prior work with the National Physical Laboratory had established a selective metallisation process, using a silver nanoparticle catalyst followed by electroless copper. The aim of current project work by the materials science collaborators was to replace the silver nanoparticle catalyst with a copper nanoparticle catalyst and establish a sustainable selective metallisation process for textiles. In parallel, the design management approach was to engage end users in the product design process with the aim to achieve aesthetically pleasing and fashionable assistive technology for older people.
Page 1 of 2
Suggested Items
Eutect Overcomes Panel Soldering Challenges with New Gripper
09/06/2024 | Eutect GmbHThe selective soldering of assemblies in panels is not a real challenge. However, if you need to solder relatively large panels with towering components, specialists like those at Eutect GmbH have to step up to the plate.
AIM Solder Appoints Kevin Kwan as Business Development Manager in Asia
09/06/2024 | AIM SolderAIM Solder, a global leader in solder assembly materials for the electronics industry, is thrilled to announce the appointment of Kevin Kwan as Business Development Manager for the Asian market.
Solder Printing: A 1:1 Ratio of Technical and Creative
09/03/2024 | Nolan Johnson -- Column: Nolan's NotesWhen things get technical, I’m in my happy place. It’s why I work in technology in the first place. I also happen to enjoy creative pursuits, and my real happy place is when both happen at the same time. Over the years, it seems that most of us engaged in printed circuit design and manufacturing are similarly wired. I don’t think I’m alone in stating that finding a creative solution to a technical problem is one of the highlights of our workday. We get bonus points if the solution is particularly simple or uncomplicated.
AIM to Present on Ultra-Miniature Assembly for Mini/MicroLEDs at MicroLED Connect
09/03/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming MicroLED Connect Conference and Exhibition taking place September 25-26 in the Conference Center at High Tech Campus Eindhoven in The Netherlands.
STARTEAM GLOBAL Announces Strategic Partnerships with Notion Systems and Peters Group
09/03/2024 | STARTEAM GLOBALSTARTEAM GLOBAL, an established printed circuit board (PCB) manufacturer with over 35 years of expertise, is pleased to announce new strategic partnerships with two German corporations: Notion Systems GmbH, a manufacturer of inkjet printing systems for functional materials, and Lackwerke Peters GmbH & Co. KG, also known as Peters Group, a full-range supplier of coating materials for electronics and PCBs worldwide.