-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueDon’t Just Survive, Thrive
If we are to be relevant and prosper during these next critical decades in electronics, we must do more than survive. As an industry, we can and must thrive. In this issue, our contributors explore these concepts meant to help you take your business to the next level.
Material Matters
Materials management is nuanced, multifaceted, and requires a holistic systems approach for business success. When building high mix, low volume, and high technology, managing materials and overall cost containment are even greater challenges.
Additive Manufacturing
In this month’s issue, we explore additive manufacturing technology for the PCB fabricator: where it stands today, the true benefits, and where it seems to be headed.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Triangle Labs: Covering the Niche Market of Large Boards
May 18, 2018 | Patty Goldman, I-Connect007Estimated reading time: 11 minutes
![](https://iconnect007.com/application/files/1816/3131/7838/John-Michael-Gray.jpg)
I recently had the opportunity to speak with John-Michael Gray, president of Triangle Labs. We had quite a discussion on their rather unique capability of building large-format PCBs and multilayers—perhaps the largest PCBs in the world. To make very large PCBs, one needs some very large processing equipment—room-sized—as is the case with Triangle Labs.
Patty Goldman: John-Michael, please begin by telling me a little bit about yourself and Triangle Labs.
John-Michael Gray: Absolutely. I got my start with Triangle Labs when I was 22 years old, and I am 39 now, so about 17 years with the company. I started working in the back in the photo department, then moved over to processing, with a small stint in plating, and then back to photo. I really have a good, fundamental understanding of board processioning and fabrication, but not quite a mastery. Then I was found to be better suited to the front end and moved into a sales role. I transitioned in as president over the past two years after my work in the business development arena, which I still lead. I'm still out there in the field meeting with customers and maintaining the sales department. It's been great.
Goldman: Give me some background on Triangle Labs.
Gray: Triangle Labs was formed in 1994, in Redwood City, California. We are historically a Silicon Valley company, but the permitting and regulations in California at the time really didn't encourage hardware manufacturing companies, mainly PCB shops. We looked for a new location and found Carson City, Nevada, where the permitting fees were about 30x smaller than California. We moved here in 2004 and have been here for about 14 years now, which has been wonderful. Here we were able to install a 20,000 square foot facility with full electroplating on-site, which we did not have in Redwood City—we just had engineering and on-site services there.
Goldman: And now you can make the full circuit boards.
Gray: Yes, we can. In fact, according to my research, we make the largest circuit in the world that is a full master panel, at 48” x 96”. I don't know of many people that can do that.
Goldman: That must be a great niche to be in.
Gray: Yes, absolutely.
Goldman: Tell me more about Triangle Labs.
Gray: Currently we have 19 full-time employees. This building was originally 15,000 square feet, but we just added on 5,000 square feet onto the back to expand our large board capabilities, so 19 employees in a 20,000 square foot facility right now.
It looks like we're working in two departments: one is our core microwave work, which we've been doing for many years that supports Raytheon, Boeing, Lockheed Martin, and companies like that; and then there is our large format PCB manufacturing. We've purchased all new equipment for the large format PCBs—new processing equipment, new conveyorized Chemcut lines, and I believe the largest laser direct imager in the world now, which is a Limata UV-O LDI that can handle the 48 x 96 panels. We've really expanded into that big board niche market.
Goldman: That must be a big machine. What are the dimensions?
Gray: It's basically the size of a small room. It's probably 14’ x 8’, and it’s about seven feet tall. It's taller than me, and I'm pretty tall.
Goldman: What else can you tell me about Triangle?
Gray: We're a preferred supplier for Raytheon on all of their AESA radar systems, so we provide quite a few part numbers to Raytheon TAS-Tactical Airborne Systems, for their AESA radars, primarily F-15, F-18, and to a lesser extent the F-16. That's our core work that we really pride ourselves on. We have a perfect delivery record, and a full quality system. We expanded into the large board business in 2010, and we are currently building all 1,800 replacement boards for the ATLAS New Small Wheel upgrade at the (LHC) Large Hadron Collider, in Geneva Switzerland at CERN. That's been an exciting, yet challenging program. They want us to maintain basically a 2-mil deviation from top to bottom on a 48” x 86” board.
Goldman: Is all the equipment is conveyorized?
Gray: Yes, other than the optical CMM that we use to measure the features, everything is conveyorized and requires two people for handling.
Goldman: I would think two people would be necessary, because of course you have to move the panels from one piece of equipment to another at some point.
Gray: Yes, we created many custom racks so the board comes off from one conveyor, it slides onto the rack, it goes vertical, and the operator takes it to the next station. There's very little hand carrying of the boards. They're actually all semi-automated racks that we use to transport the large boards.
Goldman: That's good. And I take it all your equipment was specially designed for you?
Gray: Yes, absolutely. All the equipment was specially designed. We have subject matter experts and a lot of people who work on just the handling of such a big board because handling really is a major concern for something so big. You're not putting this board on a small board rack. It's on a big wheeled rack with casters on it at this point.
Goldman: Are these rigid boards?
Gray: Some of the skins or innerlayers are 4 mils, up to 062”. Yes, they are rigid FR-4 boards. But we can also process PTFE and Polyimide boards to this size as well.
Goldman: But even rigid panels must still bend and flex when they're that long, right?
Gray: Exactly.
Goldman: You've got the laser-direct imaging, but what about drilling? How is that done?
Gray: That's a great question. We custom-ordered two Pluritec MEGA drilling machines that would normally be set up for a minimum of three heads and basically had Pluritec turn those into a single-head and double-head unit that can handle 54” x 120”. We can drill and rout a large panel like that. We repurposed existing equipment to accommodate the large size. We also ordered two Schmoll-Machinen machines that are one meter by one meter, which is about 40” x 40”, give or take. Everything's very large in our facility. Even our smaller equipment is large, compared to the standard 18” x 24” board.Page 1 of 2
Suggested Items
Altair Signs MoU With University of Nottingham to Develop Aerospace Digital Twin Project
07/25/2024 | PRNewswireAltair, a global leader in computational intelligence, has signed a memorandum of understanding (MoU) with the U.K.-based University of Nottingham for a digital twin project within the aerospace sector.
Collins Aerospace Relocating Singapore Plant to New $250M Manufacturing Facility in Seletar Aerospace Park, Singapore
07/25/2024 | Collins AerospaceCollins Aerospace, an RTX business, announced the relocation of its Singapore manufacturing facility to a new, state-of-the-art site in Seletar Aerospace Park, Singapore.
Innovative and Cost-effective BGA Re-balling
07/23/2024 | Shavi Spinzi, Nano Dimension/EssemtecA new, high-quality BGA re-balling process, which is integrated into an all-in-one solution of dispensing and placement equipment developed by Essemtec, brings new opportunities for the reapplication of expensive BGA components. This new method seamlessly integrates the sequence of flux deposition and ball (sphere) placement with the subsequent soldering process.
Vertical Aerospace Begins Testing on New VX4 Prototype
07/22/2024 | BUSINESS WIREVertical Aerospace, a global aerospace and technology company that is pioneering zero emissions aviation, announced that testing on its most advanced eVTOL aircraft, unveiled last week, has started with initial powered ground tests, including propeller balancing, successfully complete.
Aerospace Riveting Equipment Market to Surpass $160M Revenue till 2032
07/22/2024 | Global Market InsightsThe aerospace riveting equipment market will witness over 3.5% CAGR between 2024 and 2032, propelled by burgeoning partnerships among companies for distribution and expansion.