-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueCounterfeit Concerns
The distribution of counterfeit parts has become much more sophisticated in the past decade, and there's no reason to believe that trend is going to be stopping any time soon. What might crop up in the near future?
Solder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
A Culture of Thriving
One cannot simply command thriving; it must be nurtured, developed, and encouraged. In this issue, we explore strategies to improve your working relationship model—both internally and externally. In this culture of thriving, your business will grow in the process.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - smt007 Magazine
A New Standard for Standards – From Data to Information
September 7, 2018 | Dr. Glen Thomas, Creative ElectronEstimated reading time: 3 minutes
The main challenge we have today with our manufacturing standards is that they are deterministic. For example, for X-ray inspection of BGAs, the standard is a 30% maximum void per ball. This standard determines if a BGA assembly passes or fails. Now, there's nothing to say that a ball with 29% void could not fail and there's also nothing to say that a 31% void in a single ball could not work. It's understandable that for a manufacturing process you need to set some clear parameters to define what's a pass and what's a fail, otherwise it becomes very complicated to set quality standards for a manufacturing process.
Now, it's important to keep in mind that these deterministic thresholds, for example 30% maximum void per ball on BGAs, were developed in a time when collecting data from instruments in a manufacturing line was very costly. And further, contextualization of that data, meaning the process to input all the data that's collected from the individual instruments and inserting that into context, was even more expensive. In some cases, it was technically infeasible.
So, what has changed with Industry 4.0 and other initiatives from equipment manufacturers? The answer is simple: data is more available. Individual instruments are already collecting a lot of data. But that data has not been used or contextualized. Data is getting cheaper. However, data out of context has another name, it’s called noise. Contextualized data, on the other hand, is called information.
At Creative Electron, we're proposing a new perspective on setting pass and fail thresholds in the manufacturing line, based on actual performance and test data, rather than an arbitrarily set number. Instead of setting deterministic numbers, like the 30% void, we would collect data and determine what's a pass and what's a failure. Thus, scrap is minimized, since you only rework or scrap the parts you really need to reject because you know they're likely to fail. What’s more, you gain a greater understanding of where to set the pass or fail parameters.
This, in a way, is what is being done now for QFNs. There's no clear directive for voiding on QFN. So, when asked by our customers, we advise they follow the guidelines of the component manufacturer, based on what works for that specific component and application.
How Does this New Solution Work?
Take the example of a new board with a BGA. With the normal NPI (New Product Introduction) process, you would assemble several boards and would X-ray the BGAs and measure the voids on each one of the balls and check if you are below the 25% or 30% void in each of the balls, depending on the class of product that you are developing.
We propose still collecting the data, but instead of using a simple pass or fail threshold, we suggest testing and using the test data to determine the threshold. So, we collect more and more data to set a dynamic threshold that can move up or down depending on the results we have from real tests. This way we use the actual test data that's available to fine tune our manufacturing thresholds.
There are several test parameters we can use to determine pass or fail in high volume. Going back to our QFN example, if there's a temperature band that the component is supposed to work at, we can place the component and measure with an X-ray system how much voiding we have on the QFM, and using an infrared or laser thermometer, we can determine if the temperature guidance is being followed.
Smart factory solutions are not just about collecting data, they are about using that data intelligently to make faster and better decisions. We think this is a great example of using the data derived throughout the line to create a more efficient and more effective use of X-ray and rework resources.
About Dr. Glen Thomas
Dr. Glen Thomas is a proven veteran in the inspection market with over two decades of experience developing and marketing X-ray systems. Dr. Thomas leads Creative Electron’s lead generation and branding strategy. He also manages the company’s relationship with our domestic and international sales channels. He has been instrumental in helping the company create the best X-ray inspection systems in the world by providing its customers with unrivaled value. Dr. Thomas has held executive leadership positions and was instrument at the growth of companies like Faxitron, Micro Focus Imaging, Radsource Technologies, X-Ray Imaging Solutions, and Lixi.
Dr. Thomas holds a BS in Electrical Engineering and a PhD from the University of Wisconsin in Madison.
Suggested Items
Teledyne's Detector Enables NASA's Europa Clipper MISE Instrument
10/21/2024 | TeledyneTeledyne Technologies Incorporated is pleased to announce its contribution to NASA's successful Europa Clipper launch, which took place at NASA's Kennedy Space Center.
Connect the Dots: Designing for Reality—Outer Layer Imaging
09/26/2024 | Matt Stevenson -- Column: Connect the DotsWelcome to the next step in the manufacturing process—the one that gets the chemical engineer in all of us excited. I am referring to outer layer imaging, or how we convert digital designs to physical products. On a recent episode of I-Connect007’s On the Line with… podcast, we explained how the outer layer imaging process maps the design’s unique features onto the board.
Omni Design Technologies Partners with Aura Intelligent Systems on Next Generation Radar
09/16/2024 | BUSINESS WIREOmni Design Technologies, a leading provider of high-performance, low-power data acquisition and signal-processing solutions, and Aura Intelligent Systems, a developer of high-resolution imaging radar for ADAS and autonomous vehicles, announced a partnership on Aura’s next generation digital radar development.
MEMS & Imaging Sensors Summit to Highlight Innovations Driving the Next Generation of Connectivity
09/11/2024 | SEMIThe SEMI MEMS & Imaging Sensors Summit, themed Sensor Revolution for a Connected Future, is set to bring together some of the world’s leading minds in sensor technology on November 14 at the International Conference Center Munich (ICM), Germany.
Teledyne FLIR Delivering Airborne Surveillance Systems to Japan Maritime Self-Defense Force Worth Up to $21 Million
09/09/2024 | BUSINESS WIRETeledyne FLIR Defense, part of Teledyne Technologies Incorporated, has announced that it is delivering its Star SAFIRE® 380-HLD multi-spectral imaging systems to the Japan Maritime Self-Defense Force (JMSDF) as part of an agreement worth up to $20.8 million.