-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueSolder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
A Culture of Thriving
One cannot simply command thriving; it must be nurtured, developed, and encouraged. In this issue, we explore strategies to improve your working relationship model—both internally and externally. In this culture of thriving, your business will grow in the process.
Certifications
Certifications have historically been seen as a cost of doing business, but how do we turn them into a positive ROI and a value to both customer and vendor?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Jennie Hwang: Get Ready for Disruptive Technologies
March 27, 2019 | Nolan Johnson, I-Connect007Estimated reading time: 10 minutes
![](https://iconnect007.com/application/files/1016/3129/1223/Jenny_Hwang300.jpg)
At IPC APEX EXPO 2019, I met with Dr. Jennie S. Hwang, a columnist, author, and all-around an expert in PCB assembly. We discussed some of the changes she has seen since joining the industry, and disruptive technologies that technologists we are going to have to face in the near future. Are you ready for the future?
Nolan Johnson: You have been one of our columnists for a long time with SMT007 Magazine. You were saying before that you might be our most tenured columnist.
Dr. Jennie Hwang: Yes, I started at age six (laughs). I’ve been in this industry for nearly four decades. I have observed and participated in its most dynamic, challenging, and rewarding times, and I am continuing to do so. I would be glad to share some of my retrospective and prospective thoughts about our industry. Surface-mount technology (SMT) has served as the backbone of electronic products and enabled the printed circuit board (PCB) manufacturing industry to thrive since PCBs are the brains of electronic products. SMT was implemented in the early ‘80s, give or take a couple of years, which made personal computers possible, sitting on the desktop, instead of occupying a whole room.
For the last three or four decades, the industry has had periods of abundant breakthroughs or drastic changes, as well as the periods of incremental changes and gradual advancements throughout the industry hierarchy in materials, design, equipment, processes, and manufacturing infrastructure. The 1987 Montreal Protocol on eliminating the ozone-depleting CFCs led to the development of no-clean chemistry for soldering, solder paste, and overall CFC-free cleaning. Also, the 2001 lead-free legislation initiated by EU ROHS that implemented lead-free electronics is another example of an event that led to major industry changes.
Concerning SMT, we experienced continued changes in packaging and component design, from PLCC and SOIC components to QFPs, fine-pitch QFPs, BGAs, fine-pitch BGAs, small form factor bottom-termination components, PoP, and other 2.5D and 3D packages. Thus, the evolution of new package designs affects solder paste formulation, the printer and stencil design, the equipment, and all of the accessories and supporting services, which involved a large number of suppliers. Accordingly, I have seen countless refinements and improvements and worked hard on them to serve the industry.
One of my professional development courses or industry lectures is under the title, “Emerging Technologies of the Electronic Industry.” In this lecture, one of the viewgraphs that I have often used to illustrate the industry from the manufacturing perspective is the hierarchy of the electronic industry, which includes semiconductors, IC packages and passive components, the module level, the PCB level, and the system level. SMT essentially focuses on the packages and components, the module level, and the PCB level, and to a lesser degree, the system level.
Practically speaking, the SMT industry is driven by the semiconductor sector. However, those phenomenal semiconductor chips would have no use if they couldn’t be reliably connected to the real world to deliver the intended performance. That’s where the critical role of SMT comes into play—to connect semiconductor chips to the real world to deliver performance through a PCB.
Johnson: I come from the IC design tools side. I wrote code as an engineer for for a major EDA company for a number of years, specializing in IC design. I think you’re exactly right. You need to have that conversation. “What can you do on the wafer? What can you do on the silicon? What package does that require to get it out in the real world, and how does that interface with the board?” You were just touching a little while ago on new product development. Where do you see us right now?
Hwang: With the incessant introduction of new packages and components, surface mount manufacturing has been relentlessly improved and refined. Today, we are moving into advanced manufacturing using IoT and AI to truly move into what I call intelligence-teaming manufacturing.
Johnson: We’re starting to talk about the dimensions now on the PCB that were the dimensions we designed to with integrated circuits when I was working in that industry. We have dramatically reduced the dimensions, and that changes what you need to do as far as fabrication on the boards; assembly drastically changes.
Hwang: Yes, the miniaturized dimensions drive all sectors of the industry—materials suppliers, PCB fabricators, SMT production operations, equipment manufacturers, and others.
Johnson: There’s a lot of attention at IPC APEX EXPO this year on CFX and Hermes, being able to pass data, having machine-to-machine interoperability. Where does that fit in your perspective? Is that disruptive or a refinement?
Hwang: The future factory is driven by the nascent Industry 4.0 and its ultimate goal to achieve intelligence-teaming manufacturing or operations in an integrated manner. In manufacturing—such as surface mount—reliability, agility, flexibility, efficiency, and desirable costs are the name of the game. However, becoming truly automated is a daunting task.
Johnson: That’s a provocative comment. Let’s go into that.
Hwang: We always say, “Surface mount is an advanced manufacturing technology,” and that is true. In many ways, it enables us to produce the electronics we have today. But true automation in the realm of Industry 4.0 must deliver all of the features I previously mentioned: high reliability, agility, flexibility, efficiency, and low cost. Over the years, surface mount equipment and processes—such as the printing, inspection, reflow—have advanced tremendously, which have possessed some level of automation. But if you look at surface mount as a whole operating system, it’s modulized and not integrated. We need to have advanced manufacturing, which means intelligence-teaming automation.
One caveat in automation is that it can produce a substandard product, which is certainly not an outcome that we want to have. Reliability, particularly for electronics, is critical. Even for consumer products, such as smartphones that are not mission critical, we still don’t want them to malfunction or “die” on us (except the battery).
Johnson: To pick up your point, I was amazed at the automotive executive forum. Someone commented that the field failure rate we have in phones is very good, but for automotive, they need to be something like two orders of magnitude lower in field failure rate. That’s the reliability that the industry needs to strive for. So, if someone is thinking that it’s challenging to get to cellphone requirements, that’s nothing compared to automotive.
Hwang: Right. In automotive, safety is the top priority, which is another level of reliability. We’re assessing from every functionality. For example, looking at the solder joint, I just taught a course yesterday titled, “Preventing Production Defects and Product Failure.” Interestingly, a lot of the attendees came from the automotive industry, military, and high-reliability electronics manufacturers. Obviously, they are concerned about potential product failure. So, we keenly care about the premise behind reliability. How you define reliability and look at it? Each industry has a different level of reliability they’re seeking or required to deliver. Not all products and industry sectors need the same level of reliability.
In my lecture, I always remind the audience that reliability is relative to your product service environment. Aerospace is different from the design of a dishwasher. Further, reliability is correlated to cost. How to optimize reliability to balance the performance features, manufacturability, cost, and time to market is a challenging question to address. After all, we produce electronics products where the business goal is often focused on introducing them to the market in a timely manner. Therefore, we must balance those factors. For a car, we want the electronics to perform whether it’s for engine control or the glove compartment. So, how do we produce that? It’s about making tradeoffs and reaching a balance with manufacturability, reliability and time to market. We can say, “We will design a most reliable product,” but if it will take another 15 years, that may make the product not viable anymore.
Page 1 of 2
Suggested Items
Eutect Overcomes Panel Soldering Challenges with New Gripper
09/06/2024 | Eutect GmbHThe selective soldering of assemblies in panels is not a real challenge. However, if you need to solder relatively large panels with towering components, specialists like those at Eutect GmbH have to step up to the plate.
AIM Solder Appoints Kevin Kwan as Business Development Manager in Asia
09/06/2024 | AIM SolderAIM Solder, a global leader in solder assembly materials for the electronics industry, is thrilled to announce the appointment of Kevin Kwan as Business Development Manager for the Asian market.
Solder Printing: A 1:1 Ratio of Technical and Creative
09/03/2024 | Nolan Johnson -- Column: Nolan's NotesWhen things get technical, I’m in my happy place. It’s why I work in technology in the first place. I also happen to enjoy creative pursuits, and my real happy place is when both happen at the same time. Over the years, it seems that most of us engaged in printed circuit design and manufacturing are similarly wired. I don’t think I’m alone in stating that finding a creative solution to a technical problem is one of the highlights of our workday. We get bonus points if the solution is particularly simple or uncomplicated.
AIM to Present on Ultra-Miniature Assembly for Mini/MicroLEDs at MicroLED Connect
09/03/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming MicroLED Connect Conference and Exhibition taking place September 25-26 in the Conference Center at High Tech Campus Eindhoven in The Netherlands.
STARTEAM GLOBAL Announces Strategic Partnerships with Notion Systems and Peters Group
09/03/2024 | STARTEAM GLOBALSTARTEAM GLOBAL, an established printed circuit board (PCB) manufacturer with over 35 years of expertise, is pleased to announce new strategic partnerships with two German corporations: Notion Systems GmbH, a manufacturer of inkjet printing systems for functional materials, and Lackwerke Peters GmbH & Co. KG, also known as Peters Group, a full-range supplier of coating materials for electronics and PCBs worldwide.