Knocking Down the Bone Pile: Addressing End-of-life Component Solderability Issues, Part 4
Nolan’s Notes: Finding Your Sweet Spot
Standard of Excellence: Delivering Excellence—A Daily Goal
Schmalz Launches 'Clever Automation Solutions' for Electronics Production
November 18, 2019 | SchmalzEstimated reading time: 1 minute
Vacuum specialist Schmalz has unveiled numerous “clever” solutions for the automated handling of delicate electronic components.
For example, gripping systems that reliably protect delicate components against electrostatic discharge.
Electrostatic charges and the resulting uncontrolled electrostatic discharge (ESD) produce irreversible damage to electronic components such as chips or printed-circuit boards.
To resolve this problem, Schmalz produces handling solutions especially for the electronics industry – for example, vacuum suction cups made of NBR-ESD.
The suction cups are made of a special dissipative material that reliably protects the delicate components from damage through safe and rapid electrostatic discharge.
Both flat and bellows suction cups are available with different geometries and dimensions.
The ejectors are not only very small and powerful, but are also available in various designs and are suitable for mounting on blocks as a terminal.
Special variants are also suitable for use in combination with an external vacuum supply.
The spring plunger FSTIm is also designed for handling tasks in the electronics industry. It ensures gentle handling of delicate workpieces and is available in an electrically conductive version, says Schmalz.
In addition, Schmalz produces the flow grippers SCG and SCGS for secure gripping of printed-circuit boards and other electronic components. Both versions can be equipped with different suction cups, which are optionally available in NBR-ESD.
As a result, electrostatic discharges can be reliably prevented. The vacuum suction cup SUF is recommended for flat workpieces. This is suitable for universal use due to the variety of material options and also comes in a conductive version, says Schmalz.
Schmalz also presents the new addition to its range of electrical vacuum generators, the compact CobotPump ECBPM.
The device is specially designed for the automated handling of small parts with a single suction cup and is suitable for use on collaborative robots with a lift capacity of up to three kilograms.
The vacuum is entirely produced by electrical power and uses no compressed air. As a result, there is no need for conventional hoses, which makes it much easier to use in mobile robotics in particular.
Share on:
Suggested Items
Knocking Down the Bone Pile: Addressing End-of-life Component Solderability Issues, Part 4
07/15/2025 | Nash Bell -- Column: Knocking Down the Bone PileIn 1983, the Department of Defense identified that over 40% of military electronic system failures in the field were electrical, with approximately 50% attributed to poor solder connections. Investigations revealed that plated finishes, typically nickel or tin, were porous and non-intermetallic.
Arrow Electronics Launches Engineering Solutions Center to Support Tech Innovation Across India and Southeast Asia
07/09/2025 | Arrow ElectronicsArrow Electronics, a global provider of technology solutions, announced the launch of its new Engineering Solutions Center(ESC) in Bangalore, India.
I-Connect007’s Editor’s Choice: Five Must-Reads for the Week
07/04/2025 | Marcy LaRont, I-Connect007For our industry, we have seen several bullish market announcements over the past few weeks, including one this week by IDC on the massive growth in the global server market. We’re also closely watching global trade and nearshoring. One good example of successful nearshoring is Rehm Thermal Systems, which celebrates its 10th anniversary in Mexico and the official opening of its new building in Guadalajara.
Count On Tools Recognizes Donna Orr’s Ongoing Leadership and Impact Across 27+ Years
06/26/2025 | Count On ToolsCount On Tools, Inc. (COT), a leading provider of precision components and SMT spare parts, is proud to recognize Donna Orr, Executive Manager, for her continued dedication and leadership as she marks more than 27 years with the company.
A Record Year for the 75th Annual IEEE Electronic Components and Technology Conference (ECTC)
06/26/2025 | ECTCThe 75th annual 2025 IEEE Electronic Components and Technology Conference (ECTC), held at the Gaylord Texan Resort & Convention Center here May 27-30, had record attendance, a record number of paper submissions/presentations, record international and student participation, and a record number of exhibitors in a sold-out exhibition hall: