-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
IPC President and CEO Dr. John Mitchell: COVID-19 Global Industry Update
March 23, 2020 | Barry Matties, I-Connect007Estimated reading time: 13 minutes

Audio Summary:
On March 20, Dr. John Mitchell, IPC president and CEO, spoke with I-Connect007 publisher Barry Matties in an exclusive phone interview with updates on COVID-19 related current events in the manufacturing industry.
In this information-packed 14-minute audio interview, Dr. Mitchell shares key takeaways from Friday’s IPC Executive Forum conference call. The call, with over 100 industry executives in attendance, had just recently concluded when we spoke with Dr. Mitchell. He shared that the call provided both a briefing and an information-sharing opportunity for those attending.
Dr. Mitchell also outlined the resources in place at IPC for guidance from governmental agencies ranging from global to U.S. state and local information. Mitchell and Matties discuss what lessons are being learned so far from the COVID-related disruptions, what concerns IPC the most at this time, and what the recovery is likely to look like.
I-Connect007 continues to deliver original reporting and coverage of the electronics design, electronics manufacturing, and contract manufacturing industries, including up-to-date information from the companies, associations, and supply chains globally. Find the latest news and information at www.iconnect007.com and on our new topic bulletin board, “Industry Leaders Speak Out: Responses to COVID-19 Outbreak” found here.
- To read a letter that Dr. Mitchell sent to the nation's governors, click here.
- Download MP3 of Audio Interview
Read the transcribed audio interview:
Barry Matties: Today we’re talking to John Mitchell, President and CEO of IPC. John, with the COVID-19 outbreak, the IPC obviously is taking an active role. Why don’t you give our listeners an update as to what’s going on please?
John Mitchell: Yes, so as you know, IPC’s membership encompasses the entire world of electronics manufacturing everywhere. Every region is slightly different and yet there are common threads throughout. So part of what we’re doing is trying to make sure people have and are going to the proper sources to make sure that they have the latest information. What happens in California may be drastically different than what’s going on in Germany or maybe drastically different than what’s going a little bit North of them in Oregon, or could be one city is different than another. And so we’re trying to make sure that they are referencing the right sources there.
So today, actually, just a couple of hours ago, we held an industry call. We called it our Executive Forum on COVID-19 in which we shared an update of what’s going on in those governments. So we walked through Asia, Europe, the U.S. A lot of the callers since we did it on this time zone were US-based. And then we did a brief economic update as well about some of the economic implications of what’s going on with the virus. Our chief economist, Shawn DuBravac did that. He will actually be doing another webinar on that on Monday in a more in-depth. We cut it down about five minutes just so people could see what other people are doing.
We’ve been serving the members and bringing that data to say, “Okay, what are you hearing from your suppliers? What’s the supply chain delay? Is that changing now?” And we were even serving them in doing some polling on this in this forum we just had a couple of hours ago as well. These are basically CEOs, presidents of the various organizations around and we had over a hundred on the call today, which was great. And we’ll be doing that call weekly on Wednesdays going forward.
We had the governor of California in the governor of New York last night and this morning basically say stay indoors, right? Time to be shut in, time to get through this except for only nonessential industries, should be going there. So we yesterday we sent letters to every governor across all 50 states saying, “Hey, there needs to be some clarity about what is essential and what’s not,” because the state can kind of determine that, the federal government does not or has not yet. We also sent it to those same governing bodies as well as the heads of counties as well as the associations for mayors as well to say, “Hey look, the electronics industry is critical to solving this. The things that we’re building are in some ways...” Sometimes they don’t even realize that they’re tied to it. So they’re helping with these devices, infrastructure, defense, whatever it may be, communications pieces.
Mitchell: And so we’re encouraging them to say, “You guys are part of that exception.” And so we’ve been communicating that as well. So those are just a few things that we’ve been doing on behalf of the membership to help solve that.
Matties: What sort of questions, John were coming out of the meeting today from the executives?
Mitchell: This is a peer-to-peer kind of discussion. So a lot of them are saying... So we had some companies that were based in China and so they’re kind of on the back end of this, right? Right now we’re having no domestically reported new cases of COVID-19 in China. And that’s great news and things are starting to get back to a normal-ish over there. And so the experience of China where people were sharing that, they said, “Oh well, you had these three levels. What was level one, what was level two, what was level three?” And the one example was, “Hey, level one was education, level two was okay, we did temperature sensing and things like that. Level three we went all the way to masks, temperature sensing and social distancing.”
So that was one of the questions that was going on. There were questions about shipping. We had one person share an example. They said, “Hey, I was trying to drop ship something from Europe to the West Coast of the U.S.,” and they were getting quoted 10x the price. And so it’s creating an awareness. But those are the kinds of questions and some of it was reporting, “How are you handling, if a patient becomes ill, what do you do? How have you handled that?” And these are people that haven’t experienced it yet, so it’s a great chance for them to take this information back to their companies and say, “Okay, here’s what this company did. Or here’s what that company did. How do we want to form our policies around that?”
Matties: Great. Now you said this is going to be an ongoing weekly call.
Mitchell: Yes. Well, basically planning to be weekly, at least through April. We’ll see if we need to lengthen it beyond that.
Matties: All right, great. And this is open to all members or what’s the protocol there?
Mitchell: We’ve been inviting the executives of member companies. It’s not a free for all. It’s really an invitation thing for the executives because we’re trying to keep it to decision-makers so that we don’t have everybody and their brother. It would be very difficult to suddenly we had 200,000 people get on the phone. It’s much more manageable when it’s a couple of hundred. And even that, it’s a little bit of a challenge.
Matties: Now you mentioned that there was an economic summary there. What was that summary? What’s the telling there?Page 1 of 2
Suggested Items
50 Years of productronica: World’s Leading Trade Fair Celebrates Anniversary
05/21/2025 | productronicaWhen productronica takes place in Munich from November 18 to 21, 2025, a milestone birthday will be on the agenda. The world’s leading trade fair for the development and production of electronics is celebrating its 50th anniversary.
Tax Policy Update from IPC: The House Tax Bill, and What It Means for Electronics Manufacturers
05/20/2025 | IPCOn May 13, the House Ways and Means Committee advanced a major tax package that includes several provisions supported by IPC. These provisions—including restoring bonus depreciation, immediate R&D expensing, and strengthening the pass-through deduction—were identified by IPC members as key tools that would help them invest, grow, and compete more effectively.
KYZEN to Focus on Aqueous Cleaning and Stencil Cleaning at SMTA Juarez
05/20/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Juarez Expo and Tech Forum, scheduled to take place Thursday, June 5 at the Injectronics Convention Center in Ciudad Jarez, Chihuahua.
Federal Electronics Adds AS9100 Certification to Hermosillo, Mexico Facility, Expanding Aerospace & Defense Capabilities
05/20/2025 | Federal ElectronicsFederal Electronics, a leader in providing advanced electronic manufacturing services, has officially added AS9100 certification to its Hermosillo, Mexico facility, further aligning its operations with the quality standards required by the aerospace and defense industries.
Recognizing IPC Scholarships, Awards, and Opportunities
05/21/2025 | Charlene Gunter du Plessis, IPC Education FoundationThere was no better way to end our year in 2024 than by recognizing hard-working and driven students and educators for their involvement and interests in the electronics manufacturing industry. Through the IPC Scholarship and Awards program, we can help students invest in their future and reward their hardworking and dedicated accomplishments.