GLOBALFOUNDRIES, Mentor Launch Semiconductor Verification Solution
September 24, 2020 | Globe NewswireEstimated reading time: 2 minutes
GLOBALFOUNDRIES, a leading specialty foundry, announced at its annual Global Technology Conference (GTC) a significantly enhanced design for manufacturability (DFM) kit embedded with advanced machine learning (ML) capabilities. Developed in collaboration with Mentor, a Siemens business, the new industry-leading ML-enhanced DFM solution, built on Mentor’s Calibre® nmDRC platform, can provide customers with a more effective design and development experience and, ultimately, contribute to a faster time to market.
The new ML-enhanced DFM kit is launching as an update to the process design kit (PDK) for GF’s 12LP+ differentiated semiconductor solution. Built on a proven platform with a robust production ecosystem, 12LP+ is optimized for artificial intelligence (AI) training and inference applications, and is currently ready for production at GF’s Fab 8 in Malta, New York.
GF’s new ML-enhanced DFM solution is among the first of its kind in the industry. GF plans to roll out the capability to the PDKs of its 12LP and 22FDX® semiconductor platforms in Q4 2020.
“We are excited to launch this new enhancement, infused with advanced machine learning models, and provide our customers with a quicker overall DFM verification and an even more effective design experience – all toward the goal of successful prototyping and a faster time to market,” said Jim Blatchford, vice president of Technology Enablement at GF. “Our close partnership with Mentor helped enable the new enhancement to be seamlessly integrated into our 12LP+ PDK, and we look forward to rolling out additional machine learning-infused capabilities in the PDKs for our other specialty semiconductor solutions.”
“We are pleased to partner with GLOBALFOUNDRIES to incorporate machine learning based models into Calibre nmDRC for GF’s 12LP+ platform,” said Michael White, director of Physical Verification Product Management, Calibre Design Solutions, at Mentor. “Working together with GLOBALFOUNDRIES, we have incorporated machine learning into the design flow to help create a seamless transition for our mutual customers."
Following its founding in 2009, GF has pioneered a DFM checking platform, called DRC+, which combines pattern-matching tools from electronic design automation (EDA) software suited with a proprietary library of yield detractor patterns. DRC+ enables chip designers to preventively detect defective patterns, or hotspots, in early designs that could lead to manufacturing defects.
GF and Mentor have partnered to integrate GF-developed ML models into DRC+, to help amplify the ability of DRC+ to recognize new and previously unseen hotspot patterns and improve production yield. Trained by GF on silicon data collected during its manufacturing operations, the new ML-enhanced DFM kit has been validated and qualified to enable chip designers to more successfully discover and mitigate potential problems early in the design process.
Catching and addressing these hotspots in the development phase is critical for designers as they progress toward successful prototyping and scale manufacturing.
Suggested Items
Looking For That Perfect Job? Check Out jobCONNECT007
07/25/2024 | I-Connect007 Editorial TeamThere are a lot of open positions in this industry today. But where do you begin to look? We have the answer: jobCONNECT007, your guide to career opportunities in the electronic industry. In jobCONNECT007, you’ll find job openings that span the entire circuit board supply chain. Whether you’re involved in design, fabrication, assembly, test, or material development or distribution, this handy resource can help you get on your way to a new gig.
Strip Etch Strip: Episode 9 of On the Line With... Designing for Reality Podcast Now Available
07/25/2024 | I-Connect007Don't miss the latest episode of "On the Line With... Designing for Reality," where we walk through the PCB manufacturing process. At this stage, we have a panel made up of all the internal layers laminated together, through-holes drilled, and the outer layer copper features covered with a protective layer of tin.
Ventec Giga Solutions & Hi-Print Team up to Launch World's First 3-Color Inkjet Printing Solution
07/24/2024 | Ventec International GroupVentec Giga Solutions, Ventec’s value-added PCB equipment division, and leading inkjet printer manufacturer Hi-Print have teamed up to launch the industry’s most cutting-edge inkjet printer for solder mask technology.
Ian Walsh Appointed as Sondrel’s Regional VP for America
07/23/2024 | SondrellSondrel, a leading provider of ultra-complex, custom chips for leading global technology brands, has appointed Ian Walsh as its Regional VP for America, with the responsibility of growing Sondrel’s US semiconductor business from its new Silicon Valley offices in Santa Clara, CA.
LG Accelerates Smart Factory Solutions Business Integrating AI with 66-year Manufacturing Expertise
07/23/2024 | LGLG Electronics is advancing its smart factory solutions business by integrating artificial intelligence (AI) and digital transformation (DX) with its extensive 66-year history of manufacturing and production expertise.