Defense Speak Interpreted: Is DARPA Still Around After CHIPS?
Beyond the Board: Orbital High Ground—Why Space Superiority Is Slipping Away
The Government Circuit: Trump’s Trade War Disrupts the Electronics Ecosystem
BAE Systems Successfully Tests SABER Technology for Compass Call Upgrade
April 6, 2021 | BAE SystemsEstimated reading time: 1 minute
BAE Systems successfully flight tested its Small Adaptive Bank of Electronic Resources (SABER) technology, paving the way for a critical software upgrade to the EC-37B Compass Call, a next-generation electronic warfare aircraft. Teams from both BAE Systems and the U.S. Air Force conducted tests on 11 flights of an EC-130H from Davis Monthan Air Force Base in Arizona.
The SABER system is a major technological advance – transitioning from hardware to software-based electromagnetic spectrum (EMS) warfare capability for the U.S. Air Force and its Compass Call weapon system. The system is built on a suite of software defined radios using an open system architecture and will provide the backbone of the EC-37B’s operating system.
“SABER allows flexibility to update systems without significant physical reconfiguration,” said Pam Potter, director of Electronic Attack Solutions at BAE Systems. “It also adapts to new applications as well as revisions to existing applications. It is the technology that will enable the U.S. Air Force to rapidly and proactively respond to emerging enemy threat systems.”
SABER complies with Department of Defense standards to embed protective measures during product design, as well as leverages an open architecture to enable hosting of various government contracted applications.
Additional SABER testing in 2021 will focus on simultaneity of engagement capacity, dynamic resource sharing, rapid integration, and operation of multiple additional applications.
Work on SABER is being conducted at BAE Systems’ state-of-the-art facility in Hudson, N.H.
Share on:
Suggested Items
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Specially Developed for Laser Plastic Welding from LPKF
06/25/2025 | LPKFLPKF introduces TherMoPro, a thermographic analysis system specifically developed for laser plastic welding that transforms thermal data into concrete actionable insights. Through automated capture, evaluation, and interpretation of surface temperature patterns immediately after welding, the system provides unprecedented process transparency that correlates with product joining quality and long-term product stability.
United Electronics Corporation Advances Manufacturing Capabilities with Schmoll MDI-ST Imaging Equipment
06/24/2025 | United Electronics CorporationUnited Electronics Corporation has successfully installed the advanced Schmoll MDI-ST (XL) imaging equipment at their advanced printed circuit board facility. This significant technology investment represents a continued commitment to delivering superior products and maintaining their position as an industry leader in precision PCB manufacturing.
IBM, RIKEN Unveil First IBM Quantum System Two Outside of the U.S.
06/24/2025 | IBMIBM and RIKEN, a national research laboratory in Japan, today unveiled the first IBM Quantum System Two ever to be deployed outside of the United States and beyond an IBM Quantum Data Center.
Excellon Installs COBRA Hybrid Laser at Innovative Circuits
06/23/2025 | ExcellonExcellon is pleased to announce the successful installation of a second COBRA Hybrid Laser System at Innovative Circuits, located in Alpharetta, Georgia. The Excellon COBRA Hybrid Laser System uniquely combines both UV and CO₂ (IR) laser sources on a single platform—making it ideal for high-density prototype and production printed circuit boards (PCBs).