BAE Systems Successfully Tests SABER Technology for Compass Call Upgrade
April 6, 2021 | BAE SystemsEstimated reading time: 1 minute
BAE Systems successfully flight tested its Small Adaptive Bank of Electronic Resources (SABER) technology, paving the way for a critical software upgrade to the EC-37B Compass Call, a next-generation electronic warfare aircraft. Teams from both BAE Systems and the U.S. Air Force conducted tests on 11 flights of an EC-130H from Davis Monthan Air Force Base in Arizona.
The SABER system is a major technological advance – transitioning from hardware to software-based electromagnetic spectrum (EMS) warfare capability for the U.S. Air Force and its Compass Call weapon system. The system is built on a suite of software defined radios using an open system architecture and will provide the backbone of the EC-37B’s operating system.
“SABER allows flexibility to update systems without significant physical reconfiguration,” said Pam Potter, director of Electronic Attack Solutions at BAE Systems. “It also adapts to new applications as well as revisions to existing applications. It is the technology that will enable the U.S. Air Force to rapidly and proactively respond to emerging enemy threat systems.”
SABER complies with Department of Defense standards to embed protective measures during product design, as well as leverages an open architecture to enable hosting of various government contracted applications.
Additional SABER testing in 2021 will focus on simultaneity of engagement capacity, dynamic resource sharing, rapid integration, and operation of multiple additional applications.
Work on SABER is being conducted at BAE Systems’ state-of-the-art facility in Hudson, N.H.
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
UHDI Fundamentals: UHDI Technology and Automated Inspection
11/03/2025 | Anaya Vardya, American Standard CircuitsFollowing up on the last article on integrating ultra high density interconnect (UHDI) PCB technologies and Quality 5.0, here we will do a deeper dive into the automated inspection component. UHDI applications demand extreme precision, with line/space dimensions below 25 µm and microvias below 30 µm. Automated inspection systems are essential to achieving the defect-free fabrication required at these scales, and legacy automated inspection systems are becoming obsolete and ineffective.
OSI Systems Reports Fiscal Q1 2026 Financial Results
10/31/2025 | BUSINESS WIREOSI Systems, Inc. announced its financial results for the first quarter of fiscal 2026.
Aircraft Wire and Cable Market to surpass USD 3.2 Billion by 2034
10/30/2025 | Global Market Insights Inc.The global aircraft wire and cable market was valued at USD 1.8 billion in 2024 and is estimated to grow at a CAGR of 5.9% to reach USD 3.2 billion by 2034, according to recent report by Global Market Insights Inc.
David Schild Addresses Printed Circuit Board Issues as a Panelist at AUVSI
10/30/2025 | PCBAAOn October 28, Printed Circuit Board Association of America executive director David Schild appeared on a panel at the Association for Uncrewed Vehicle Systems International (AUVSI) conference on the topic of “First Supply Chains: Strengthening the Industrial Base for Autonomy.” PCBAA sponsored the event and Schild shared his views on issues facing the American microelectronics industry.
Real Time with... SMTAI 2025: Koh Young's Innovations in SMT Inspection Technology
10/30/2025 | Real Time with...SMTAIJoel Scutchfield discusses his background as well as Koh Young's advancements in inspection technology. The conversation covers various inspection systems, including the flagship Zenith 2 system and recent software upgrades.