-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueWet Process Control
In this issue, we examine wet processes and how to obtain a better degree of control that allows usable data to guide our decisions and produce consistently higher-quality products.
Don’t Just Survive, Thrive
If we are to be relevant and prosper during these next critical decades in electronics, we must do more than survive. As an industry, we can and must thrive. In this issue, our contributors explore these concepts meant to help you take your business to the next level.
Material Matters
Materials management is nuanced, multifaceted, and requires a holistic systems approach for business success. When building high mix, low volume, and high technology, managing materials and overall cost containment are even greater challenges.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Electronic System Design Industry Reports 17% Revenue Growth in Q1 2021
July 16, 2021 | SEMIEstimated reading time: 1 minute
Electronic System Design (ESD) industry revenue increased 17% to $3.15 billion in Q1 2021, the strongest first-quarter growth ever, the ESD Alliance, a SEMI Technology Community, announced in the Q1 2021 Electronic Design Market Data (EDMD) report. The first-quarter revenue compares to $2.69 billion in Q1 2020. The four-quarter moving average, which compares the most recent four quarters to the prior four, rose 15%, the highest annual growth since 2011.
“The industry reported substantial, double-digit year-over-year revenue growth for Q1 2021,” said Walden C. Rhines, Executive Sponsor, SEMI Electronic Design Market Data report. “All product categories significantly contributed, with double-digit growth in the Computer Aided Engineering (CAE), IC Physical Design and Verification, Printed Circuit Board and Multi-Chip Module (PCB and MCM), and Semiconductor IP (SIP) segments.”
“Geographically, the Americas; Europe, Middle East, and Africa (EMEA); and Asia Pacific (APAC) also reported double-digit growth,” Rhines said. “Q1 2021 marked a new high for quarterly growth of total license and maintenance revenue, as well as IC physical design and verification.”
The companies tracked in the EDMD report employed 49,024 people in Q1 2021, a 6.7% increase over the Q1 2020 headcount of 45,938 and up 1.1% compared to Q4 2020.
The quarterly EDMD report contains detailed revenue information with the following category and geographic breakdowns.
Revenue by Product and Application Category
- CAE revenue increased 14% to $974.1 million compared to Q1 2020. The four-quarter CAE moving average increased 12.5%.
- IC Physical Design and Verification revenue surged 34.4% to $682.5 million compared to Q1 2020. The four-quarter moving average for the category rose 23.6%.
- Printed Circuit Board and Multi-Chip Module (PCB and MCM) revenue increased 15.3% to $289.2 million compared to Q1 2020. The four-quarter moving average for PCB and MCM increased 5.3%.
- SIP revenue rose 12.9% to $1,113 million compared to Q1 2020. The four-quarter SIP moving average grew 17.1%.
- Services revenue increased 0.1% to $98.9 million compared to Q1 2020. The four-quarter Services moving average held steady with no growth.
Revenue by Region
- The Americas, the largest reporting region by revenue, purchased $1.28 billion of electronic system design products and services in Q1 2021, a 15% increase compared to Q1 2020. The four-quarter moving average for the Americas rose 13.5%.
- Europe, Middle East, and Africa revenue increased 14% to $447.3 million compared to Q1 2020. The four-quarter moving average for EMEA grew 6.7%.
- Japan revenue decreased 3.7% to $258.8 million compared to Q1 2020. The four-quarter moving average for Japan rose 4.3%.
- Asia Pacific revenue increased 26.9% to $1,166.3 million compared to Q1 2020. The four-quarter moving average for APAC increased 23.8%.
Suggested Items
I-Connect007 Editor's Choice: Five Must-Reads for the Week
09/06/2024 | Nolan Johnson, I-Connect007This week’s Top 5 starts with steps you can take to cultivate a culture of thriving. We also have bullish news from the global semiconductor sector, advice on how to tease out hidden cost drivers during the PCB design cycle, how the Altium-Ansys collaboration will affect design, and Happy Holden’s version of Occam’s Razor—three simple tools to keep your wet processes in line.
Impact of the Altium-Ansys Partnership on PCB Design
09/05/2024 | Josh Moore, AltiumThere’s a saying in electronics hardware design: “There are two types of electronics designers: those who have signal integrity problems and those who will.” This adage emphasizes the inevitability of encountering and the need to address signal integrity (SI) and power integrity (PI) issues.
Hidden Cost Drivers in PCB Design
09/05/2024 | Cherie Litson, CID+, Litson1 ConsultingI recently taught a CID+ course, and if you’ve ever taken a CID or CID+ course, you know that we discuss cost adders quite a bit. When I asked the class of 15 design engineers their ideas on the biggest cost adders, the first and strongest response: the project manager. Are you surprised by their answer? After over 40 years in the industry, I wasn’t. If you step back and look at the process of product development, you’ll see that many decisions that affect costs down the line really do take root with the project manager.
Altium, Mouser Team Up to Advance Electronics Education and Careers Worldwide
09/05/2024 | AltiumAltium LLC, a global leader in software and solutions for the electronics industry, and Mouser Electronics, a global authorized distributor of semiconductors and electronic components, are excited to announce a strategic partnership aimed at advancing electronics education and careers worldwide.
Young Professionals Spotlight: Process Engineer Kevin Dial, American Standard Circuits
09/05/2024 | Dan Beaulieu, D.B. Management GroupWhen I heard that my friends at American Standard Circuits had hired a new, fresh-out-of-college process engineer, I was anxious to meet him. Now, you get to read this interview. It’s a rare perspective of a young man new to our industry.