Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Suggested Items

HANZA's Principal Owner Increases its Holding

10/14/2024 | HANZA
HANZA’s main shareholder Färna Invest AB, owned by Gerald Engström, has purchased 380,000 shares in HANZA AB during September and owns 9,980,000 shares in the company at the end of September, corresponding to 22.86%. This is according to data as of 2024-09-30 from Euroclear.

Molg Raises $5.5M in Seed Funding to Tackle Electronics Waste Through Circular Manufacturing

10/11/2024 | PRNewswire
Molg Inc. announces the closing of $5.5 million in seed funding to scale the company's circular manufacturing processes for electronics and electrical components. Closed Loop Partners' Ventures Group led the round, with participation from Amazon Climate Pledge Fund,

UHDI Fundamentals: ‘UHDI’ Bleeding-edge Entertainment Applications, Part 1

10/10/2024 | Anaya Vardya, American Standard Circuits
As soon as we cross below the 1-mil (0.001") line width threshold, we need to stop talking in terms of mils and ounces and begin talking in terms of microns. For reference, a 3-mil trace is 75 microns, so a 1-mil trace is 25 microns. In general terms, ultra high density interconnect refers to line and spaces on a printed circuit board that are sub-25 micron. In the context of this article, ultra high-definition interconnect (UHDI) refers to the technology and infrastructure used to transmit and connect ultra high-definition signals, typically 4K, 8K, or even higher resolutions, across devices like displays, cameras, servers, and processors.

Sanmina Launches 42Q Connected Manufacturing, Real-Time Visibility to Distributed Manufacturing Immediately Available

10/08/2024 | PRNewswire
42Q, a Sanmina division, a leading provider of cloud-based Manufacturing Execution Systems (MES), announces the launch and immediate availability of 42Q Connected Manufacturing. An innovative solution that addresses manufacturing supply challenges in real-time, providing global visibility, optimization and manufacturing supply insights.

IPC Recommends Greater Focus on Electronics Needed for US-based AI Data Centers

10/07/2024 | IPC
A new white paper from IPC, “AI-based Data Centers for the United States: Technologies, Supply Chains, and Resiliency Gaps,” explores the actions needed to improve the supply chain resiliency of U.S.-based artificial intelligence (AI) data centers and the electronics used in them.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in